Sybase数据库技术,数据库恢复

• 首页
• 关于
• 订阅
• 归档
• 留言
• 标签
• 免费ASE测试环境
• 镜像站
• 恢复工具

CR:227520

CR Number:   227520 Product Name:   PB Enterprise Product Component:   Install Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 3 28 Dec 2000 Fixed Description PB 8 Beta 2 buidl 2051 : 1. Run setup.exe for Beta2_2051. Go through custom install. 2. Select 'Native Database Interfaces' and click 'Change'. Under 'Select Sub-components' , Oracle 8.x native driver is described as "Oracle 8.0.4 / 8.0.5". It should rather say 8.0.4+/ 8i+ or similar as its good for 8.0.5 and later versions. 3. Click continue - next - next until you reach 'Start Copying Files' screen which gives you a summary of the options you chose to install. Under Native Database Interfaces you will find " Oracle 8.x Interface (O84) Oracle 8.0.4/8.0.5" This is a repetition.

CR:227590

CR Number:   227590 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description Memory leak with ADOResultset generated from datastore resultset

CR:227609

CR Number:   227609 Product Name:   PB Enterprise Product Component:   Source Control Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 22 Nov 2000 Third Party Problem Description PB 8 build 3009, PVCS 6.7 Select Entry | Source Control | Advance Options or Select Entry | Source Control | Run PVCS Source Control both of them will open the PVCS Options window, from there one can go into VM but not directly from the Run PVCS Source Control menuitem. If you look at the same menuitems when connected to Visual SourceSafe the Run VSS opens VSS manager and the advance options shows the Options, two seperate menus have two seperate funcitonalities.

CR:227613

CR Number:   227613 Product Name:   PB Enterprise Product Component:   DW Synchronization Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description GetFullState/SetFullState fails to capture OCX datawindow completely. Works fine as a regular datawindow, but no graph appears when using GetFullState/SetFullState.

CR:227615

CR Number:   227615 Product Name:   PB Enterprise Product Component:   Menus - Runtime Status:   Closed OS:   Microsoft Windows 98 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 31 Oct 2002 Presently Not Targeted For Any Future Release Of This Product Description The design is to create a menu which has 1 menu item, 1 second level sub menu item and 1 third level sub menu item. The menu is associated with a window of type main! This scenario has a script which causes the SECOND level sub menu item to lose focus e.g. messagebox(). On Win98 operating system, PB will gpf in USER.EXE (in development environment and runtime); On NT4, this scenario does not gpf. [ From PB help:- Because MessageBox grabs focus, you should not use it when focus is changing... ] The gpf on Win98 does not occur if the sub menu script keeps focus. Workaround Description  Place any script which would cause the menu item to lose focus in lowest level of sub menu e.g. if menu levels 1, 1.1, 1.1.1 - then place script in lowest level i.e. 1.1.1 for minimal event message queue interference.

CR:227652

CR Number:   227652 Product Name:   PB Enterprise Product Component:   Script Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 01 Mar 2001 Fixed Description OLE scripting against Word 6 in German. When using german commands containing Umlaute, the script will not compile giving a C0031 syntax error. Workaround Description  Use the aquivalent english commands

CR:227658

CR Number:   227658 Product Name:   PB Enterprise Product Component:   Source Control Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 3.1 3021 28 Feb 2001 Fixed Description PB 8 build 30009 : When using PBNative as Source Management tool, it should populate the user and Storage Location automatically depending on the last one when using the workspace. It comes up as blank.

CR:227721

CR Number:   227721 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 16 Mar 2004 EOL'd version. Not to be Fixed. Description Jaguar only finds htmldw.js is it exists in the folder Jaguar is started from. When starting Jaguar outside of $JAGUAR/bin you receive error: DW_LibMain() - open htmldw.js: No such file or directory CdwHTMLRenderer::loadTemplate() -g_lpstrWebDWRsrcBuf NULL: No such file or directory

CR:227761

CR Number:   227761 Product Name:   PB Enterprise Product Component:   Script Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 30 Nov 2000 Fixed Description When a line of script has a breakpoint associated with it and the code is selected and cut, PB gpfs.

CR:227767

CR Number:   227767 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.00 Fixed Version Build Resolution Date Closure Code (If Appropriate) 16 Nov 2000 Duplicate Description In PB 7 multiple windows (or other objects) can be opened simultanously. When having more than 15 windows open at the same time (sometimes less) PB just disappears.

CR:227800

CR Number:   227800 Product Name:   PB Enterprise Product Component:   Window - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 09 Mar 2001 Fixed Description According to the documentation the PrintSetPrinter() PowerScript command should return 1 is successful and -1 if an error occurs. It returns 0

CR:227861

CR Number:   227861 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 27 Feb 2001 Not a Bug Description PB 6 & 7: Problem displaying certain Universe Condense font characters in an sle, text box. Worked okay on the text of a button. The characters do appear properly in the properties page.

CR:227875

CR Number:   227875 Product Name:   PB Enterprise Product Component:   DW HTML Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10040 25 Feb 2004 Fixed Description In a HTML DW, a long (or ulong) column keyed with a leading 0 is replaced by a dummy value when the column loses the focus. For instance, 0700 gives 448, 08 gives 0, 0777 gives 511.

CR:227877

CR Number:   227877 Product Name:   PB Enterprise Product Component:   DW Display Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 16 Mar 2004 EOL'd version. Not to be Fixed. Description PB7: Column name specification field not getting updated after changing property

CR:227888

CR Number:   227888 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 06 Dec 2001 Not a Bug Description Close of the window which is of type Response! causes pb to crash , the crash handler file is available in the zip file.In debug the crash seems to be happening after successfull execution of the open of the response window. The response window in turn calls a popup window which has a OLE control on it and a dw control (this dw control has 6 ole controls on it) All the OLE controls used here are the Pegasus Image OCX. w_test_parent - Clicked event of the button - Open(w_test) w_test - Clicked event of the button - Open(w_notice_printing) & script to load the ole on the window and dw. PB will not crash if atmost 2 ole controls are populated in the dw(parent window of the window containing dw is Response!). OR if the window is of type Main! then there is no problem with the number of OLE Controls being populated. Looks like there is some kind of limit when using a Response window in terms of memory cache, which does not get released at the appropriate time. This is NOT a PB BUG : " When a child window of a Response! window is closed, the child window's "garbage" (unused objects) are "piled onto" the garbage bin of the parent Response! window. If the parent window is not a Response! window, then garbage collection is performed when the child window is closed. " You should force GarbageCollect() in the close event of the child window. Workaround Description  Use Main! window instead of Response! type window for the parent window

CR:227940

CR Number:   227940 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 02 Mar 2004 EOL'd version. Not to be Fixed. Description This problem is a regression and occurs in the development environment object painter e.g. Window painter, UO painter, Menu painter. For example, in any of the object painters (mentioned above), there is a "Script pane" there are 3 dropdownlistboxes :- - Object/Functions/Declares - Script/Declare Type - Ancestor/Descendant The "Ancestor/Descendant" ddlb is disabled after the save object operation. This failure happens for ALL objects which ARE inherited and OVERRIDE ancestor functions:- -Menu -Window -User object The impact is that the PB developer cannot switch to ancestor nor descendant script. PB6.x: N/A, feature not available in this release. Workaround Description  Change focus from the function and then return to it e.g. Toggle "Object/Functions/Declares" ddlb to a different section name from (Functions). Return to section name (Functions). "Ancestor/Descendant" ddlb is now enabled.

CR:227963

CR Number:   227963 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 31 Oct 2002 Presently Not Targeted For Any Future Release Of This Product Description Unable to tab from one field to another in third party ocx. The up,down arrows do not work either. When positioning the mouse in a field, you can enter data but you cannot tab thru the fields.

CR:227995

CR Number:   227995 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description find/replace in the window scripts painter does not close with ESC key

CR:228003

CR Number:   228003 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description OLE Browser does not show up COM server when the Inproserver32 entrie has file name such as %SystemRoot%\filename.dll Workaround Description  Modify the Inprocserver32 by setting the full path without using environment varaiables

CR:228006

CR Number:   228006 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description If an expression is set on the visible property of a column querymode ignores the column value in the where clause, ie. query mode does not work. Workaround Description  Code the expression evaluation in script.

CR:228025

CR Number:   228025 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 24 May 2001 Fixed 27 Dec 2000 Fixed Description When in the dw painter and you try to change the value of a graph under the "data" tab, pb will crash. Works ok in PB 6.5.1 and 8.0.

CR:228091

CR Number:   228091 Product Name:   PB Enterprise Product Component:   DW HTML Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10067 25 Feb 2004 Fixed Description The netscapelayers property is not formatting multiple datawindows on a page. First dw is formatted but subsequent dw's are not. Using the following format: ls_ns = "datawindow.htmlgen.NetscapeLayers='yes'" ls_ret = dw.Modify( ls_ns )

CR:228104

CR Number:   228104 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 12 Mar 2001 Fixed 12 Mar 2001 Fixed Description A crosstab datawindow that has a column with a dddw will gpf in the dw painter when you select retrieve. Happens in pb 8.0 (build 2055). No problems if column has no dddw associated with it.

CR:228122

CR Number:   228122 Product Name:   PB Enterprise Product Component:   DW DDDW Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 3 13 Mar 2001 Fixed Description PB8 Beta2: Column validation error occurs in 8.0 and not in 7.0 in a shared datwindow dddw column on an insertrow.

CR:228125

CR Number:   228125 Product Name:   PB Enterprise Product Component:   DataBase Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.00 EBF1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 02 Dec 2004 Not reproducible with latest version of the product available as of Resolution Date Description export of syntax of a table does not export Unclustered indexes. Both db interfaces only Clustered indexes are exported , unclustered are not.

CR:228126

CR Number:   228126 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description 1. Create a workspace and target. 2. Create a datawindow (any style). 3. Click on a column and bring the properties up under the general tab. 4. The enhancement request is for a new type of "Border" . See the dropdown options under the border. Customer would like to add a 'TopLine' as an opposite of already existing 'Underline'. A 'topline' would make summary fields easier to differentiate (as a separator from rest of the fields) - e.g, totals or any other computed fields.

CR:228156

CR Number:   228156 Product Name:   PB Enterprise Product Component:   DW HTML Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10049 25 Feb 2004 Fixed Description HTML Datawindow JavaScript Caching.The first click on a required column having a dddw as Edit property, fires an itemerror event claiming that the field is required. This happens with IE and not with Netscape. Workaround Description  Don't use javascript caching if possible or use Netscape if possible.

CR:228174

CR Number:   228174 Product Name:   PB Enterprise Product Component:   Menus - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 31 Oct 2002 Presently Not Targeted For Any Future Release Of This Product Description When a toolbar item is the first item and it is in a cascading menu and you dynamically change the following properties: this.m_tools.m_pencil.visible = false this.m_tools.m_pencil.enabled = false this.m_tools.m_pencil.toolbaritemvisible = false The tool bar item still appears when running app. As soon as you select another item, than that toolbar item can no longer be seen. If you physcially move pencil after glasses and rerun app, than pencil doesn't show up. Workaround Description  Physically move the order of the cascading menu so that the items are will be change dynamically are not the first ones in the order.

CR:228223

CR Number:   228223 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.00 Fixed Version Build Resolution Date Closure Code (If Appropriate) 15 Jun 2004 EOL'd version. Not to be Fixed. Description PB7 / PB8 Translation ToolKit. Datavalue of a DDLB (editstyle of a column) in a datawindow lost after translation workaround: add the datavalue after translation again Workaround Description  add the datavalue after translation again

CR:228239

CR Number:   228239 Product Name:   PB Enterprise Product Component:   DW Wizards Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 08 Mar 2001 Fixed Description PB 8 build 3009 Create a new dw of type freeform, on the selection for border choose shadow box/3d lowered/3d raised for text and column , finish the dw , notice the text border does get reflected as requested during dw creation but the column border comes back as 'NONE'

CR:228240

CR Number:   228240 Product Name:   PB Enterprise Product Component:   Project Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 05 Dec 2000 Fixed Description PB 8 build 3009 Description of Problem: When you build a project without a name (for the project), the output window shows as follows: "---------- Deploy: Deploy of " 1. Create any small target application. 2. RMB the target and 'New - Project - Application'. 3. Choose an exe name and click build. 4. The output window displays " Deploy of " with no name. It should contain some name such as the executable name itself.

CR:228242

CR Number:   228242 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description Resizable property when set to True/False in script for OLE control does not change the border type to Resize/default Workaround Description  either use resize functions or set the property at design time depending on the need of the application.

CR:228272

CR Number:   228272 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.0.00 Fixed Version Build Resolution Date Closure Code (If Appropriate) 05 Dec 2000 Duplicate Description When adding or deleting a column from the datasource of a very large datawindow (many hundreds of columns) an OUT OF MEMORY error can occur. Work-around is to modify the datawindow by exporting it and making the changes in the exported source.

CR:228290

CR Number:   228290 Product Name:   PB Enterprise Product Component:   DB MS SQLServer Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10049 09 Feb 2001 Fixed Description Cannot create table with col of size >255 for Varchar when using MSS driver. create table gives error : The maximum width for varchar column is 255 In PB 7.03 and above, on trying to save the table it blanks out the column after the messagebox and another messagebox saying Value for item required. Create table is successfull using the ODBC driver (sqlsrv32.dll 3.70.08.20).

CR:228334

CR Number:   228334 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Customer would really like PB's tab control to expose TCS_BUTTONS style. In general it would be nice for PB's wrappers of common controls to expose all the styles available. To be more specifc, he is looking for the ability to add taskbar buttons - which when clicked, open up tabpages which inherently are of TCS_BUTTONS style.

CR:228335

CR Number:   228335 Product Name:   PB Enterprise Product Component:   Target Wizards Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description The "..." for a browse button in the library search path dialog should show "Browse" and not the dots - its hard to locate and is not that intuitive to the user. RMB the workspace and select 'New - Target - Existing application'. You will see this button in "Set library search path" screen. If you don't look carefully you could easily miss that it is even there. Please replace with a Browse button so that it is easier to use.

CR:228351

CR Number:   228351 Product Name:   PB Enterprise Product Component:   Script Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Paste Special Instance popup window isn't wide enough to display the entire variable name/s. There are scroll bars on the window, but it is annoying not to be able to see the full variable name and have to scroll to view prior to making your selection.

CR:228352

CR Number:   228352 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 01 Dec 2000 Fixed Description Drop down pick lists in the IDE should not restrict their width to the width of the drop down control but instead display more/all of the text of each item in the list. Dropdown pick lists in IDE are limited in width to the control, but that obscures some of the information in the list... The lists should be allowed to be wider when expanded (like we allow for dddws) This behavior occurs throughout the IDE, so it would be a big effort to locate all occurrences but all occurences should be addressed.

CR:228353

CR Number:   228353 Product Name:   PB Enterprise Product Component:   WT - Wizard - 4gl Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 11 Jan 2001 Not reproducible with latest version of the product available as of Resolution Date Description Cannot add an ActiveX component to a web page in HTML editor - nothing happens

CR:228361

CR Number:   228361 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 20 Aug 2001 Presently Not Targeted For Any Future Release Of This Product Description Property fields of objects with integer types allow values higher than 32767 up to eleven digits to be entered. However, because they are integers after tabbing out of the field 32767 is entered. This is because all the object properties are of type integer. The customer feels that the fields in the properties view should only accept valid input and not revert to this value if larger numbers are entered.

CR:228370

CR Number:   228370 Product Name:   PB Enterprise Product Component:   Query Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Datawindows that contain unions and dw was desinged in syntax mode. when tries to open in C3 or C4, dw ok but sql gpfs. If takes text syntex and edits () he can paste into sql

CR:228429

CR Number:   228429 Product Name:   PB Enterprise Product Component:   Workspace and Targets Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 4 4114 14 Feb 2001 Fixed Description PB8 Beta2: Crash when double clicking HTML page in system tree to edit

CR:228435

CR Number:   228435 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 28 Feb 2001 Presently Not Targeted For Any Future Release Of This Product Description Description of Problem: 4GL web page elements are not centered when viewed with Netscape browser OS: Any Version and Build #: 8.0 2051 16 bit/32 bit: 32 Database/Driver File/Version: N/A Comments: When viewing the source, it appears the <P align=center> tags are in the right place, but they don't seem to be interpreted by Navigator 4.7 correctly. Could be considered a navigator bug, but we might be safer using a DIV tag which does work for both IE and Netscape Step-By-Step Instructions: 1. Add Target1.pbt target to an existing workspace 2. Configure a deployment for the target to a dynamo website 3. Deploy the target 4. View the page untitled.html in an IE browser and in Netscape and you'll notice how all the controls except for the static text are NOT centered. Test Case (zip file) Name: 41075700.zip

CR:228458

CR Number:   228458 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description OpenChannel Runtime function and its behavior. If I have the following script : long ll_ret ll_ret = OpenChannel( "","SendMail", Handle(parent) ) The applname argument for the function is null in that case everytime this code is executed a new handle number is returned into ll_ret instead of a -1 or some other error.

CR:228461

CR Number:   228461 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description PowerBuilder hangs on trying to re-deploy a PB Service component that is running. Workaround Description  You need to use Jaguar Manager and remove the service component from the server property: com.sybase.jaguar.server.services. Bounce Jag server. Re-deploy the service component.

CR:228491

CR Number:   228491 Product Name:   PB Enterprise Product Component:   DB Oracle Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 13 Aug 2001 Fixed Description When using rtrim in a computed column (example converts a date from 2/2/2000 to February 2, 2000 in the back end) the results get truncated. This works in sql and the db administrator.

CR:228521

CR Number:   228521 Product Name:   PB Enterprise Product Component:   DB DirectConnect Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 10045 05 Aug 2003 Fixed Description PB 7.03 SQLCA values returned from RPC handled different in PB 5 & PB 7 Workaround Description  See resolution for complete instructions.

CR:228531

CR Number:   228531 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 6.5.1 1274 13 Mar 2001 Fixed Description Customer has a long list of distinct Modify function statements, and they get part way through the modifys and then get an "access violation" (0xc0000005 address 0x105ca00a). Reproduced in small sample application after about 490 simple modifies. This was addressed but not fixed in CR 205097.

CR:228538

CR Number:   228538 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description An error in a dot notation to a nested dw object at run time fails to fire Error event.

CR:228613

CR Number:   228613 Product Name:   PB Enterprise Product Component:   DB DirectConnect Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 27 Feb 2001 Fixed Description PB7.02 - Calling RPC results in results pending error

CR:228619

CR Number:   228619 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10037 25 Feb 2004 Fixed Description Cannot create c:\temp\...pbd when deploying to EAServer

CR:228621

CR Number:   228621 Product Name:   PB Enterprise Product Component:   DW SaveAs Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Jun 2001 Fixed Description VM Size jumps by about 500M on a DW SaveAs to a WMF at random in pb dev environment causing incomplete data to be saved if you have a column with autosizeheight set to true. If you have a column whose autosizeheight is set to true and in pb dev run sometime on the DW SaveAs the VM Size will jump as mush as 500M which causes no error but the data supposed to be in the column with the autosizeheight does not get saved. This behavior can be created but is very random in pb development. Once this happens the memory i snot released until you physically shut down pb, just shutting the application does not work. If you create an exe you can reproduce the VM Size jump on the very first saveas. I have tried SaveAs excel/txt/htmltable and was not able to repro the memory jumps, it only seems to be related to WMF! file. In PB 7 there is no such memory jumps on the SaveAs. In the customer's case he gets a dr watson, I was not able to repro the dr watson, in my case the VM size went about about 890M , I even tried opening a number of sheets and clicking on the save quickly but no change or error other than not saving data .

CR:228735

CR Number:   228735 Product Name:   PB Enterprise Product Component:   DB Sybase System Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10070 18 May 2001 Not a Bug Description Sybase database interface: Repeatedly creating new logins in the database painter can cause a crash, when the login already existed. Work-around : To test if a user already exist, you can also use a select statement like: select name from syslogins where name = <specified name>

CR:228747

CR Number:   228747 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Customer would like to see the Powerscript functions added to the Autoscript enabling. See online help: PowerScript reference>Statements, Events and Functions>Powerscript Functions for a list of all the functions.

CR:228750

CR Number:   228750 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Suggestion to have a base class from which datawindow and datastore are both inherited - or perhaps inherit datawindow from datastore?

CR:228761

CR Number:   228761 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Please add an option to cancel out when opening a wrong workspace/target/pbl, etc If the user double clicks on the wrong library or directory then one has to wait for it to be completely displayed before being able to switch to the correct one. Especially in PB 8, the loading of the libraries is time-consuming. Suggestion that this option could use the 'ESC' key or perhaps the 'Ctrl-C' combination.

CR:228770

CR Number:   228770 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.2 10047 22 Mar 2001 Fixed Description Repaint problems if HSplitScroll is selected and the dw control does not have a horizontal scroll bar created at runtime. The problems seems to be only if you have HorizontalSplitScroll + Grid/Tabular combination. If it is grid then complete data is not seen in its entirity, if it is tabular then you see an extra row half visible at the bottom of the control. On unchecking the HSplitScroll box repaint is ok. If the horizontal scroll is not there on the dw control because there is not enough data horizontally to scroll in the control, then you will see the repaint problem and the tag to pull the split scroll cannot be clicked to create a split in the control. Workaround Description  Workaround : 1) Turn Off HSplitScroll 2) Make sure the you have enough data horizontally in the dw control such that the horizontal scroll bar can be seen at runtime.

CR:228824

CR Number:   228824 Product Name:   PB Enterprise Product Component:   DW - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description UseFormat propertie is missed in describe of datawindow. Because UseFormat propertie is not included if doing descibe this can causes problems if using for instant the datawindow create() function. Workaround: add "editmask.UseFormat=yes" in datawindow syntax created by the describe() funktion or set the property dynamicly before retrieving -> dw.object.colomnname.editmask.UseFormat='yes' Workaround Description  add "editmask.UseFormat=yes" in datawindow syntax you got with describe or set the property dynamicly before retrieving -> dw.object.colomnname.editmask.UseFormat='yes'

CR:228830

CR Number:   228830 Product Name:   PB Enterprise Product Component:   Documentation Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 3 08 Mar 2001 Fixed Description Add the new file system functions to the Help under System Functions by Category>File Functions, the new printer functions to System Functions by Category>Print functions, etc... The following functions: -ChangeDirectory -CreateDirectory -DirectoryExists -FileCopy -FileMove -GetCurrentDirectory -RemoveDirectory are listed under What's New>Miscellaneous>New PowerScript Functions under the heading: New File System Functions they also need to be added to the Help under: System Functions by Category>File Functions Same is true for all the other functions listed under the "What's New" section.

CR:228834

CR Number:   228834 Product Name:   PB Enterprise Product Component:   Documentation Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 26 Dec 2000 Fixed Description The online help indicates "String. Returns the current printer name". Actually, what it returns is the printer name, printer driver and port in a tab delimited string (as the PrintGetPrinters function does for the entire printer list)

CR:228835

CR Number:   228835 Product Name:   PB Enterprise Product Component:   Function Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement request: add a system function: ChooseFont() Just like there is now a ChooseColor() function, would like to have a ChooseFont() function

CR:228839

CR Number:   228839 Product Name:   PB Enterprise Product Component:   Documentation Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 8.0 Beta 3 08 Jan 2001 Fixed Description In on-line Help, position attribute of MailFileDescription object is marked as read-only, when in fact it is required to be set to properly send a message with multiple attachments.

CR:228840

CR Number:   228840 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description GetFileOpenName ( title, pathname, filename {, extension {, filter } } ) should be updated to support everything that Win32 supports (setting the directory to start in, setting the default file name to use, and add support for the explorer style dialog with multi-file selection capability). Enhancement request for GetFileOpenName function: Add the following functionality: - start-in directory - setting the default file name to use - multi-file selection cap

CR:228842

CR Number:   228842 Product Name:   PB Enterprise Product Component:   Menu Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.00 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description When a menu is inherited from a menu and saved as the same name as one of the submenu items PB hangs.

CR:228846

CR Number:   228846 Product Name:   PB Enterprise Product Component:   Library Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Columns in library painter can be hidden, but not reordered. Request is to allow this here and for all other cases where such tabular list views are used. Assuming the WIndows Explorer list view paradigm, this is a capability provided there so we should be following tthe standard behavior.

CR:228870

CR Number:   228870 Product Name:   PB Enterprise Product Component:   Migration Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 21 Oct 2004 Fixed Description Suggestion to streamline the migration process and eliminate one of the two steps at which you can specify additional libraries when migrating your application. When migrating there are two separate points in the wizard where you can enter a library list? Can one be eliminated? The two screens allowing you to do this have separate purpose, I think. One is for an existing application (which may or may not require migration) and the other is for specifically migration. However, in the case you do require migration from an existing application, it seems redundant and it should 'know' that it's already asked for library list info.

CR:228877

CR Number:   228877 Product Name:   PB Enterprise Product Component:   Library Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 08 Mar 2001 Duplicate Description When deleting directory through library painter, deletion fails with error "Cannot delete directory <name> due to items that were not able to be deleted." or an error saying that it could not be deleted because access is denied. Additionally, the prompt to confirm deletion has a double entry for the directory if the directory you try to delete is at the root of the drive. When D:\pbldirectory is RMB and delete selected then when the confirmation box comes up the directory name will be duplicated and will show as D:\pbldirectory\pbldirectory. If it is not supported to delete entire directories then the option should not come up and this should be documented. Individual pbls are successfully deleted when deleted this way but not directories.

CR:228888

CR Number:   228888 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 19 Apr 2001 Not a Bug Description Documentation says, "When working in a painter, setting the font face name causes the correct font family to be selected." which seems to allude the fact that you change only FaceName to get the appropriate settings for FontPitch, FontCharSet, and FontFamily. PB7, however, allows you to change these independently. If we are disallowing that in PB8, then remove these items on the Font tab. Presently FontPitch, FontFamily, FontCharset are disabled in IDE.

CR:228957

CR Number:   228957 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Open OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement Request: Add an event to the vtrack and htrack controls that maps to pbm_sbnthumbposition (Integer scrollpos) so that controls will work with intellimouse. Now you have to add this event manually to get the intellimouse to work. From development on why the move event doesn't work with intellimouse: Thumbwheels generate the same WM_HSCROLL/WM_VSCROLL message but with a diffierent notification code as opposed to the situation where the mouse button is used. The notification code is stored in the low word of the WPARAM that comes with the Windows message. When the mouse button is used to drag the horizontal/vertical scroll box, the windows message WM_HSCROLL/WM_VSCROLL is sent to the scroll bar control with the notification code SB_THUMBTRACK (value 5). This notification is mapped by PowerBuilder to pbm_sbnthumbtrack. Thus, if an event-handler function for pbm_sbnthumbtrack is defined, it will be fired. When the intellimouse's thumbwheel is used, the windows message WM_HSCROLL/WM_VSCROLL is sent to the scroll bar control with the notification code SB_THUMBPOSITION (value 4). This notification is mapped by PowerBuilder to pbm_sbnthumbposition. In the current example, no event-handler function for pbm_sbnthumbposition exists. Therefore, the expected behaviour did not occur.

CR:228959

CR Number:   228959 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Open OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement Request: See cr 228957. Add an event to the w_trackbars/vtrack and htrack controls and map it to the pbm_sbnthumbposition (integer scrollpos) so the the vtrack and htrack controls will slide up and down when the intellimouse is used. The new event will also need the following code: dw_1.Object.DataWindow.Zoom = scrollpos dw_1.Title = "Zoom is " + String ( this.Position ) + "%" Once a new event is generated automatically for vtrack and htrack (see 228957) than only the following code will need to be added from above.

CR:228961

CR Number:   228961 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 18 May 2001 Presently Not Targeted For Any Future Release Of This Product Description Enhancement Request: Change the name of the printgetprinters() function to printgetprinterlist. It's too close to printgetprint() and might cause confusion in the end.

CR:228981

CR Number:   228981 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 16 Mar 2004 EOL'd version. Not to be Fixed. Description The pbdwrmt.pbl is included with PB 7.0 on windows. If any changes are made and then the pbl is redeployed to unix, the librarylist for the HTMLGenerator component in Jaguar shows up as $PBDWRMT.pbd. This is a problem on unix because unix is case sensitive. The pbd is deployed on unix in lower case. When running a htmldw, it cannot find the pbdwrmt.pbd because the librarylist is $PBDWRMT.pbd. If you look at the pbdwrmt.pbl thru windows explorer, it shows up in lowercase. If you select the pbl thru pb, it shows up in upper case. The ms-dos name is in upper case. Workaround:Modify the librarylist under the HTMLGenerator component and change PBDWRMT.pbd to pbdwrmt.pbd Workaround Description  Modify the librarylist under the HTMLGenerator component and change PBDWRMT.pbd to pbdwrmt.pbd

CR:229028

CR Number:   229028 Product Name:   PB Enterprise Product Component:   Documentation Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.x Catalina Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 Fixed Description Java dataWindow (Power J) ====================== Documentation problem concerning the JAVA datawindow : Property Datawindow.data.HTML does not contain Javascript but only HTML.

CR:229146

CR Number:   229146 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 Fixed Description The date format MMM or DDD does not work on PB/Solaris Workaround Description  Create a method which returns a date type and convert it to a string on the client side.

CR:229147

CR Number:   229147 Product Name:   PB Enterprise Product Component:   Pipeline - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 01 Oct 2001 Fixed Description Calling Pipeline.Start() from a button and disabling the button (with this.enabled = false) before calling Start() causes access violation

CR:229181

CR Number:   229181 Product Name:   PB Enterprise Product Component:   DB Oracle Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10040 25 Feb 2004 Fixed Description Using the new PBVM (Build 10037) and Jaguar 3.6, cannot return data back to client. Only returns 1 row and it appears to be part of the select statement. Using a pb component in jaguar that retrieves data to a datastore. Data retreived from datastore is 1 row. A getfullstate returns a blob to a pb client. A setfullstate shows the data in the dw. Happens when Oracle 8.1.5 and 8.1.6 client is used. Used the libpbo8470x.so.

CR:229186

CR Number:   229186 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description Large dataset retrieve in dw causes an "Out of memory" error Workaround Description  At runtime : Just before the retrieve() is called try the following : dw_1.Modify("datawindow.storagepagesize='LARGE'") The problem still occurs in dw painter.

CR:229231

CR Number:   229231 Product Name:   PB Enterprise Product Component:   OLE - Active X - OCX Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.00 Fixed Version Build Resolution Date Closure Code (If Appropriate) 9.0 26 Oct 2005 Fixed Description The losefocus control of the ole container is not triggered when changing the focus from an ole container/control to a datawindow. Effect: When comming back to the control with back tab the focus will not be set into the editable region.

CR:229260

CR Number:   229260 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10041 20 Dec 2000 Fixed Description Jaguar 3.5 Server on Solaris , Core Dumps for Oracle 8.1.6 client

CR:229261

CR Number:   229261 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   Solaris 2.6 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 7.0.3 10039 14 Feb 2001 Fixed Description EAServer 3.6.1 PBVM 10037 on Solaris Crashes with Oracle 8.1.6

CR:229271

CR Number:   229271 Product Name:   PB Enterprise Product Component:   Printing Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 3 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement Request: Customer would like to extend functionality of PrintSetPrinter to dynamically create a local profile for a printer if one does not exist. PrintSetPrinter will change printers; however, customer would like capability to detect the fact that a UNC encoded printer path is not installed on the machine and have it automatically download the drivers and set up the printer defintion for you. His rationale follows: On WinNT and W2K, you can dynamically define a printer connection (the related Windows API call is AddPrinterConnection): http://msdn.microsoft.com/library/psdk/gdi/prntspol_7hgu.htm All you pass is the name of the server and printer share. If the WinNT or W2K machine doesn't have the printer drivers, it downloads and installs them automatically from the machine hosting the share. I don't believe that this is particularly important for client applications. However, it would be an important feature for server based applications, either native PB or EAServer hosted objects. A developer shouldn't be required to create a local profile on the server for every possible printer that a server based application may need to print to. What I'm looking for is a version of the PrintSetPrinter function that would take a UNC formatted servername/sharename argument, and dynamically create a profile for that printer if one doesn't already exist, and of course then make it the default. And, of course, if this call was made from a Win9x client it should simply return an error.

CR:229300

CR Number:   229300 Product Name:   PB Enterprise Product Component:   Language - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description OS: Tested on NT 4.0/98 PB Version and Build: 6.5/7.02/7.03/8.0 Beta III DB/DLL: PBVM Comments: Only happens with machine code. Also reproduced with user events (posting or triggering) Worked in PB 5, broken in PB 6.5 Workaround - Call Yield just before calling Trim On 7.02 Build 9028 it gives the following crash in PBVM 0x1139F134 - 0x00000004 - Read error On PB 8 Build 3033 0x10CNBF3c4 - 0x00000004 - Read error Workaround Description  - Call Yield() just before Trim() in the object function - Use Pcode

CR:229312

CR Number:   229312 Product Name:   PB Enterprise Product Component:   PB GUI Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description Info from customer : I was starting to run my application (out of the IDE) and I got this error message. I have no idea what it means. (The app runs fine before and after this crash).

CR:229316

CR Number:   229316 Product Name:   PB Enterprise Product Component:   Documentation Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 13 Dec 2000 Fixed Description Building and Deploying from a commandline' is a new feature in PB 8.0. The help instructions need to be more detailed. The section 'Building and Deploying from a commandline' talks about commandline parameters. However, it misses an important fact - that you have to first create and save a project object and only then you can deploy an application from commandline. Step-By-Step Instructions: This is how it works; You have to first create a project object and specify all options such as the exe name, machine code etc. Save the object in the pbl. RMB the target and under 'Deploy' tab make sure that this project object is checked. Finally, now when you run the commandline, PB starts up - deploys the project - shuts down.

CR:229317

CR Number:   229317 Product Name:   PB Enterprise Product Component:   Application Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 13 Dec 2000 Not reproducible with latest version of the product available as of Resolution Date Description PB 8 build 3033 : Two behaviors that happen with Shift+F1 key when used in the application painter : 1) In the application painter type the letter 'O' and the hit Shift+F1, the help will not scroll to the first letter you chose for e.g O...... if you do it in say window script painter it will scroll to the first topic in the list that starts with an O. 2) in the application script painter if you type " Open(w_test)" and then move the cursor to somewhere between the O and the n of the word Open then you will see 2 help window pop, one that gives you description on the Open function and second that shows you the index of help. If you do the same in the window script then only the Open function help pops up.

CR:229320

CR Number:   229320 Product Name:   PB Enterprise Product Component:   UO Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description PB 8 Beta 2: ENHANCEMENT REQUEST: Painter enhancements/modifications

CR:229324

CR Number:   229324 Product Name:   PB Enterprise Product Component:   MTS Integration Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description PB8 Beta2: Enhancement: Nice if all NVOs derived from the COM IDispatch interface

CR:229326

CR Number:   229326 Product Name:   PB Enterprise Product Component:   Jaguar Integration Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 05 Sep 2002 Not a Bug 25 Sep 2002 Fixed Description When a PB component (call it component B) running in Jaguar is called repeatedly from another PB component (component A - also running in Jaguar) the calling component (A) will hang when the properties of these components are set as described below. The calling component (A) hangs after the call to the second component (B) tries to return control to the calling component method. The method is executed correctly and deactivate and destructor events are correctly fired in the second component (B) but component A never regains control. As component A is frozen, component B is no longer called from component A but component B can still be called again from other components/clients. The problem is that component A can no longer be called from other clients. Jaguar must be restarted to use the component again The component being called (B) must have the following properties to reproduce the problem: - Automatic demarcation/deactivation selected - Bind thread selected (Note that the same component called from a PB client app works) Also component (A) must not be pooled. I have only reproduced the problem when both components have ONLY the same properties (as described above for component B) checked.

CR:229393

CR Number:   229393 Product Name:   PB Enterprise Product Component:   Edit Mask Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 15 Aug 2001 Fixed Description edit mask control issue with the date edit mask dd/mm/yy.It's possible to enter a wrong value in the day mask. For instance 90/00/00. Validation of the first datemask is not working. Failed in 6.5.1 #1240 and #1244;

CR:229504

CR Number:   229504 Product Name:   PB Enterprise Product Component:   DW Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   6.5.1 Fixed Version Build Resolution Date Closure Code (If Appropriate) 6.5.1 1278 19 Apr 2001 Fixed Description Dw with group crashes in preview when trying to advance to the next page. Happens only when the detail band is made slim to hide the columns below. WA: make the columns very slim (in height) and then adjust the detail band to the columns ie. to a height of eg. 4. Workaround Description  make the columns very slim (in height) and then adjust the detail band to the columns ie. to a height of eg. 4.

CR:229516

CR Number:   229516 Product Name:   PB Enterprise Product Component:   DW HTML Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 03 Mar 2005 Fixed Description When setting HTMLTable.Border=0 in grid dw it still shows a Border around the table. The TABLE tag will default back to BORDER=1. Several workarounds possible: Change the HTML output from the generate method on the fly: 1. Change the BORDER attribute to BORDER=0 2. Insert a CSS information for the dw on the page. Workaround Description  Several workarounds possible: Change the HTML output from the generate method on the fly: 1. Change the BORDER attribute to BORDER=0 2. Insert a CSS information for the dw on the page.

CR:229529

CR Number:   229529 Product Name:   PB Enterprise Product Component:   Window Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 16 Mar 2004 EOL'd version. Not to be Fixed. Description PB7 & PB8: mdihelp window crashes on close if Static Hyperlink has no URL

CR:229555

CR Number:   229555 Product Name:   PB Enterprise Product Component:   Function Painter Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 22 Dec 2000 Not a Bug Description Using PB7.03, I created a duplicate function (trying to overload a function). While adding the additional arguments, PB crashed. Does not happen consistently. Attached is the crash handler dump. Exception code: C0000005 ACCESS_VIOLATION File Name: E:\Program Files\Sybase\Shared\PowerBuilder\PBVM70.dll File Version: 7.0.3.10009 Fault address=1137B1B6 Section:Offset=01:0017A1B6 Registers: EAX:FFFFFFFF EBX:00000000 ECX:0012FAEC EDX:04780300 ESI:00000000 EDI:01123C10 CS:EIP:001B:1137B1B6 SS:ESP:0023:0012FADC EBP:00000000 DS:0023 ES:0023 FS:0038 GS:0000 Flags:00010246 Call stack: Address Frame Param0 Param1 Param2 Param3 Function Name 1137B1B6 00000000 00000000 00000000 00000000 00000000 0001:0017A1B6 E:\Program Files\Sybase\Shared\PowerBuilder\PBVM70.dll OS version: Windows NT 4.0, Build Number: 1381, Service Pack 5 Memory Status: Total physical memory: 261168K Available physical memory: 123900K Total virtual memory usage: 139712K / 516224K PowerBuilder virtual memory usage: 99048K / 2097024K Loaded Modules: E:\Program Files\Sybase\Shared\PowerBuilder\PB70.EXE 7.0.3.10007 C:\WINNT\System32\ntdll.dll 4.00 E:\Program Files\Sybase\Shared\PowerBuilder\PBSYS70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBCMP70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBVM70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\libjcc.dll C:\WINNT\system32\WSOCK32.dll 4.00 C:\WINNT\system32\KERNEL32.dll 4.00 C:\WINNT\system32\WS2_32.dll 4.00 C:\WINNT\system32\MSVCRT.dll 6.10.8293.0 C:\WINNT\system32\USER32.dll 4.00 C:\WINNT\system32\GDI32.dll 4.00 C:\WINNT\system32\ADVAPI32.dll 4.00 C:\WINNT\system32\RPCRT4.dll 4.00 C:\WINNT\system32\WS2HELP.dll 4.00 C:\WINNT\system32\comdlg32.dll 4.00 C:\WINNT\system32\SHELL32.dll 4.00 C:\WINNT\system32\COMCTL32.dll 5.81 C:\WINNT\System32\WINSPOOL.DRV 4.00 C:\WINNT\system32\ole32.dll 4.00 C:\WINNT\System32\OLEPRO32.DLL 5.0.4514 C:\WINNT\system32\OLEAUT32.dll 2.40.4514 C:\WINNT\system32\VERSION.dll 4.00 C:\WINNT\system32\LZ32.dll 4.00 C:\WINNT\System32\oledlg.dll 1.0 E:\Program Files\Sybase\Shared\PowerBuilder\PBDWE70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBDTS70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBDWP70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBSQL70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBLIB70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBDEV70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBORC70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBAPL70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBUDO70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBSCR70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBWED70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\PBDPP70.dll 7.0.3.10009 C:\WINNT\System32\ettmr40.dll 4.2.0.2 C:\PROGRA~1\Logitech\MOUSEW~1\SYSTEM\LgMousHk.dll 9.10.53 C:\WINNT\system32\MSIDLE.DLL 5.50.4134.600 C:\WINNT\System32\mpr.dll 4.00 C:\WINNT\System32\NOVNPNT.DLL v4.11a PTF (980408) PTF C:\WINNT\system32\NETAPI32.dll 4.00 C:\WINNT\system32\NETRAP.dll 4.00 C:\WINNT\system32\SAMLIB.dll 4.00 C:\WINNT\System32\CALWIN32.DLL 5.1.0 C:\WINNT\System32\CLNWIN32.DLL C:\WINNT\System32\LOCWIN32.DLL C:\WINNT\System32\NCPWIN32.dll C:\WINNT\System32\NETWIN32.DLL C:\WINNT\System32\CLXWIN32.DLL C:\WINNT\System32\NLS\ENGLISH\NOVNPNTR.DLL v4.11 (970501) C:\WINNT\System32\MSVCRT40.dll 4.20 - OS use only. DO NOT DISTRIBUTE C:\WINNT\System32\MSVCIRT.dll 6.00.8168.0 C:\WINNT\System32\ntlanman.dll 4.00 C:\WINNT\System32\NETUI0.dll 4.00 C:\WINNT\System32\NETUI1.dll 4.00 C:\WINNT\System32\rpcltc1.dll 4.00 E:\Program Files\Sybase\Shared\PowerBuilder\pbwep70.dll 7.0.3.10009 E:\Program Files\Sybase\Shared\PowerBuilder\pbwei70.dll 7.0.3.10009 C:\WINNT\System32\ntshrui.dll 4.00 C:\WINNT\System32\IMAGEHLP.DLL 4.00 C:\WINNT\System32\psapi.dll 4.00

CR:229570

CR Number:   229570 Product Name:   PB Enterprise Product Component:   Library Painter Status:   Open OS:   MS Windows NT 4.0 Original Version:   7.0.00 Beta 3 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement Request: Customer request the ability to lock any listview in the library painter so that it does not refresh to any changes in the treeview. Customer wants some sort of locking mechanism that can be turned on\off so that he can make one or more listviews 'static' so that changes in the Tview do not refresh them.

CR:229632

CR Number:   229632 Product Name:   PB Enterprise Product Component:   System Runtime Functions Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description Enhancement request for a "DirList()" system function that would be comparable to the PFC of_dirlist(filespec,filetype,dirlist) The idea is to be able to get the directory list information without having to resort to a listbox. It would be a System function, like the other new directory System functions (CreateDirectory, ChangeDirectory, DeleteDirectory). Compare to of_dirlist in the n_cst_filesrv_win32 object. That one takes an array of n_cst_dirattrib by reference to pass the data back. Instead of: n_cst_filesrv inv_filesrv f_SetFileSrv(inv_filesrv, TRUE) inv_filesrv.of_dirlist ( yada, yada, yada ) f_SetFileSrv(inv_filesrv, FALSE) I would just use: DirList ( yada, yada, yada )

CR:229654

CR Number:   229654 Product Name:   PB Enterprise Product Component:   UO - Runtime Status:   Closed OS:   MS Windows NT 4.0 Original Version:   10.2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 14 Jul 2005 Fixed 03 Nov 2005 Fixed Description From the documentation for olecustomcontrol, information from the externalexception and error events will be propagated to a runtimeerror object. The source and description fields from externalexception are not accessible via the try/catch mechanism. These two fields contain useful diagnostic information by the ocx vendor.

CR:229665

CR Number:   229665 Product Name:   PB Enterprise Product Component:   Window - Runtime Status:   Closed OS:   Microsoft Windows 2000 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) 06 Aug 2004 Not a Bug Description PB8 Beta2: Windows 2000 input of Thai characters not displayed correctly

CR:229668

CR Number:   229668 Product Name:   PB Enterprise Product Component:   DW Display Status:   Open OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 2 Fixed Version Build Resolution Date Closure Code (If Appropriate) Description PB8Beta2: Request that Autosize Height be available to group bands.

CR:229707

CR Number:   229707 Product Name:   PB Enterprise Product Component:   DW Display Status:   Closed OS:   MS Windows NT 4.0 Original Version:   7.0.3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 25 Feb 2004 EOL'd version. Not to be Fixed. Description Depending on the Database used and the connection mode choosen, DropDownListBox does not show the Display value when the column's datatype is CHAR. (or VARCHAR). The data value is shown instead.

CR:229728

CR Number:   229728 Product Name:   PB Enterprise Product Component:   DB Oracle Status:   Closed OS:   MS Windows NT 4.0 Original Version:   8.0 Beta 3 Fixed Version Build Resolution Date Closure Code (If Appropriate) 26 Jan 2001 Not a Bug Description PB8 Beta3: Can't create DW based on a stored procedure with Oracle ODBC driver