Sybase数据库技术，数据库恢复专家

(works fine in WM-2003)

Using "Reeds Tests"

a) SIP Tests - MAIN

a1) focus on any control, the SIP remains up.

Even though the property "ShowSIPOnFocus" is either true or false

**this is an error**

a2) button SIP_DOWN never happens

**this is an error**

a3) button SIP_ForceDown works properly

b) SIP Tests - RESPONSE

b1) all conditions work properly

Even though all the code and properties are the same

c) TrackBarTest works fine

c1) focus to the SLE - you get the SIP

c2) focus to the master trackbar - SIP goes down

The SIP panel comes up when there is a datawindow column with the "Set SIP on focus" property enabled. However, when there is a NEXT column with this property disabled, the SIP panel is then kept down for subsequent columns even if they have the property enabled.

1. The "Show SIP on Focus" property doesn't work on the 1st datawindow column.

2. The "Show SIP on Focus" property works from the 2nd datawindow column onwards.

3. If there is a datawindow column that has the "Show SIP on Focus" property unchecked, then the SIP panel will be turned off for subsequent datawindow columns regardless of whether the property has been enabled.

Eg.

If i hit the tab key into a datawindow column with the property checked, the SIP panel comes up. Then I tab into the next column which has the property unchecked, the SIP panel comes down. I tabbed again into the next column with the property checked, the SIP panel stays down.

1) PasteRTF() with contents containing two CRLFs (i.e. two {par}) at the end will only produce one CRLF.

2) Pasting in the CRLFs separately from the text. The end result is again mssing CRLFs.

where a column contains an @ sign, the following sql statement returns in the dbtrace log:

Select b @b From a where a @a =1

It appears to add a space before the @ sign and that generates a db error message occurs.

When calling a stored procedure with a large text variable in embedded SQL

with PBNewSPInvocation true then the text variable gets truncated to 128000 characters.

Work-around:

DisableBind=1

when autosize height is turned on.

if ( CurrentRow() = GetRow(), if ( menge < 0, 1, 0 ), 1 )

Where menge is a column name. This may be related to CR 416438.

different results.

For example:

Computed_zero with a expression c1/0 will return 'Zero'

Computed_null with a expression c1/0 will return 'NULL'

The format for these 2 fields is the same:

0;-0;'Zero';'NULL'

RESOLUTION: The order that the computed fields were added (as in the repro instructions) are what causes this to happen.

If the expressions are entered as indicated in the repro instructions they are compiled in the following order -

1.)computed_zero gets compiled first - and since the engine does not (yet) know what "C1" is going to be it is an expression of type "unknown", the default value is 0.

2.)C1 is compiled... it is just the value 1 ... no problem there.

3.) computed_null is compiled and now we know what C1 is so we know the expression is for a number the default value is dbl_max.

At runtime, when the expressions are evaluated, divide by zero is invalid and the default value is returned for the expression. computed_zero's default is 0, computed_null is dbl_max. dbl_max is a negative number so the format rule displays "NULL"

When I edited the source and moved the syntax for "C1" above the other two then both the other expressions displayed "NULL".

This is functionality that is to be delivered for the GA version, but isn't yet part of beta 2. I checked the release notes that are posted on 12/22/2005 and there is no mention of this not being part of beta 2.

a message will be prompted out as "Rows changes between retrieve and update" even only one

user on the MYSQL DB server.

for several minutes. Also a small memory leakage can be observed.

building the runtime library.

Edit->Undo Function Delete menu, and the deleted function or event is restored. The same is true when you delete the function or event by right clicking in the script painter. You can restore the deleted function with the Edit->Undo Function Delete menu. But if you delete the function or event by right clicking in the prototype area, then the undo menu is not available. It should be.

PB just keep used up CPU to 99% with no result return. problem sql :

" select 4 - 2 from department; "

"CustomPage.Width", PowerBuilder does not accept value with decimal point. Thus,

customer find no way to specify the printing page size.

the following error returns:

Cursor is not open

Only the cancel command is allowed when the rows are pending.

Using the following code in the retrieverow:

integer i, j

i = row

DECLARE p PROCEDURE FOR case11194444_proc(:i) USING SQLCA;

EXECUTE p;

IF SQLCA.SQLCode < 0 then

MessageBox("RetrieveRow Failed", SQLCA.SQLErrText, StopSign!)

ELSE

FETCH p into :j;

IF SQLCA.SQLCode < 0 then

MessageBox("RetrieveRow Failed", SQLCA.SQLErrText, StopSign!)

ELSEIF i <> j then

MessageBox("RetrieveRow Failed", "Expected value not returned from stored procedure", StopSign!)

ELSE

this.SetItem(row, 3, j)

END IF

CLOSE p;

END IF

where the x and y properties were set, they don't appear to take if the center

property is checked.

generating pcode or mcode and full rebuild is checked, the following warnings

appear:

Warning: C0209: Function or event must be declared before it can be compiled

Although it is a warning it is causing problems running application.

RESOLUTION: PBL contains undeclared events and now PB will generate a warning

message (cr407177). Manually remove undeclared events will resolve problem (edit source).

The ability to dynamically use non-migrated (already deployed)libraries containg DW objects on the fly in PB10 applications is desired.

As of now, LibraryExport for instance fails exporting/importing a DW from a PB 9 PBL.

then the pbvm 10 in EAServer gets a fatal error on the server side.

If PBOnFatalError is not set to "Continue" then EAServer goes down aswell.

Since the 3rd party vendors (e.g. powerwhizz.com) will give the numbers used for a certain printer vendor. He wonders why PB can't integrate that same functionality into PowerBuilder and produce a standardized set of values instead of having to use these 3rd party products.

on stored procedure invocation with PBNewSPInvocation through ODBC.

Request to use PBMaxtTextsize

declaring cursor Error parsing command: Unexpected token in FROM clause; could

not create table list.

The Unicode encoding of PowerBuilder 10 causes some previous behavior (in terms of NLS_CHAR settings) to no longer work as before.

The problem was that the following sql statement returns -1 when it should not.

ls_sql="insert into TE_USER_PREFERENCE "

ls_sql+="(PREFERENCE_ID, EMPLY_ID, PREFERENCE_VALUE, INTERNAL_SORT) "

ls_sql+="select PREFERENCE_ID, ?, PREFERENCE_VALUE, INTERNAL_SORT "

ls_sql+="from TE_PREFERENCES_TEMPLATE a where not exists (select PREFERENCE_ID from TE_USER_PREFERENCE b where a.PREFERENCE_ID=b.PREFERENCE_ID and b.EMPLY_ID=?)"

prepare sqlsa from :ls_sql using itr;

execute sqlsa using :as_login_id, :as_login_id;

if itr.sqlcode<0 then

its.setabort()

of_log(-15,this.classname()+" of_web_login",itr.sqlerrtext)

return -1

end if

The original symptom was that If inner select returns no data, sqlcode is -1. This was fixed in internal build PB 9.0.2 7697.This same statement is now failing. However, it is now always failing even if the inner select returns data.

This is what customer has tested :

9.0.2 build 7661 - fails if inner select is empty

9.0.2 build 8004 - fails if inner select is empty

9.0.3 build 8506 - pass

9.0.3 build 8511 - pass

9.0.3 build 8536 - always fails <- PSE tested version

9.0.3 build 8546 - always fails

9.0.3 build 8565 - always fails

9.0.3 build 8614 - always fails

They cannot use release 8506 or 8511 due to other problems and they are concerned that this problem appears in all EBFs since 8546.

datawindow, specify a WHERE clause with a retrieval argument, but return to the DataWindow

Painter WITHOUT defining the retrieval argument, the whole PowerBuilder will then crash.

Any retrieve events, such as RetrieveStart and RetrieveEnd, should not be triggered.

But PB 9.0.x triggers RetrieveEnd event at this condition against our expectation.

PB 10.x does not trigger RetrieveEnd event any longer at the same condition.

Users should call ImportFile() method or other import methods to import data into the DataWindow for Extrenal sources.

Migration to PB10.x seems successful but find that Datawindow Column property - limit has

different meaning. In PB7.x it count in Byte, now PB10.x it count in CHAR.

Customer would like to check for the possibility to have PB10.x behave as PB7.x in this datawindow property - edit.limit

Workaround: In the script where the mask is changed, if spin=true, set spin=false, call SetMask, then change spin back to true.

FAULTING_IP:

pbshr100!SH_MI_DATA_BLOB::Reserve+4d [e:\pb10\shared\pbshr\shmiblbd.cpp @ 138]

07a81b4d f3ab rep stosd

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 07a81b4d (pbshr100!SH_MI_DATA_BLOB::Reserve+0x0000004d)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000001

Parameter[1]: 01a5f000

Attempt to write to address 01a5f000

click on the arrow to open, the dropdown toolbar does not close when you click on

a sheet.

When you open a sheet the dropdown toolbar behavior appears to be more like a toggle.

Click to open the dropdown and click to collapse it. But that behavior is not consistent with other dropdown toolbars.

For example, even in the PB IDE, open a window and click on the Foreground Color. The color

palette will open. If you click back into the window, the color palette will close.

Is this is a documentation error, or a PB bug ?

CLOSED as duplicate of CR 346555.

1) Breakpoint disappears when removing line of script above it. (Duplicate breakpoints sometimes appear from a similar operation, but I cannot reproduce that reliably).

2) Context menu in script painter is not aware of breakpoint setting and doesn't allow clearing it.

3) Breakpoints cleared in Debugger, come back if script painter is left open.

In PowerBuilder 10 the example for the internetdata function needs to be updated to:

messagebox("HTML from GetURL", string(data, EncodingAnsi!))

Using the AWS 4.0 syntax.

Once the PB Native SCC upgrade takes place, PBNAT105.DLL should not be deleted if PB 8.x, PB 9.x, or PB 10.x are still installed on the machine.

Users can manually uninstall PB Native Source Control from a DOS command prompt:

cd %SYBASE_SHARED%

regsvr32 -u pbnat105.dll

del pbnat105.dll

of Uncaptured Runtime Exception and System Exception will lead to transaction to commit as

default instead of rollback. PB6.x - PB10.x has the same behaviour. Thus customer request

for possible enhancement.

List Out testing result for reference :

---------------------------------------

1) Fatal Error (Divided by zero) -> Transaction Committed

2) Fatal Error (Missing OLE object) -> Transaction Committed

3) Kill application -> Transaction Rollback

4) Power-off -> Transaction Rollback

using OLE connecting to a word document.

The sample application has 3 scenerios where you can see different memory leaks.

Although this was reported when running the application as an executable, you can

also see the memory leak when running in the IDE.

Scenerio1 - shows connecting to a word doc, opening the doc, closing the doc and

disconnecting from ole

Scenerio2 - shows the above and ole getting the word and character count,

paragraph alignment and myole.selection.font.bold, myole.selection.font.italic,

myole.selection.font.underline.

Scenerio3 - same as scenerio2 except the myole.selection.font.bold, myole.selection.font.italic and myole.selection.font.underline are commented out.

Scenerio 2 shows the greatest memory leak

RESOLUTION: Using the workaround of garbagecollect() appears to resolve the problem.

Create a DB profile for an Ultralite database.

Open an existing datawindow and go to Rows --> Update Properties. Click ok to come out of it and it will report error that the Table is not found. If you create a new datawindow, you will get the same error.

PB 10.5 Build 4516 installed the PB105.exe.config file over the build 4510 file.

The function ConnectToServer does not throw an exception when

no connection with the serer can be made or the URL is bad.

richtext. The user object was created in an earlier version of PB (6.5 (build 444).

The properties of HScrollBar, VScrollBar,HeaderFooter and PopUPMenu was checked.

When this pbl was migrated to a PB 10.5 (problem also occured in PB 10.2.1, 9.0.3),

you are unable to uncheck these properties.

The source code of the migrated uo shows:

on uo_test6rich.create

HScrollBar=true

VScrollBar=true

HeaderFooter=true

PopMenu=true

TopMargin=1

RightMargin=1

BottomMargin=1

BackColor=16777215

InputFieldBackColor=16777215

end on

When you create the same uo of type richtext in PB 10.5 it shows:

global type uo_new from richtextedit

integer width = 571

integer height = 600

boolean init_hscrollbar = true

boolean init_vscrollbar = true

boolean init_headerfooter = true

boolean init_popmenu = true

borderstyle borderstyle = stylelowered!

end type

global uo_new uo_new

Duplicate of CR 419494. The error message is the result of a bug fix and will not be changed. It will be necessary to modify the code by assigning the Any array to another Any array instead of using a PowerObject array as in the original code.

embedded sql statement with a UniqueIdentifier, PB will crash when you close

the application or issue a disconnect.

The gpf will happen in the following:

Exception code: 80000003 BREAKPOINT

File Name: C:\pb\pb10\Shared\PowerBuilder\PBSHR100.dll

File Version: 10.2.1.9572

Fault address=10BC4787 Section:Offset=01:000C3787

wparam = 0

lparam = 0

rc = SendMessage ( hWin, TX_FONTDIALOG, wparam, lparam )

In the debugger, after the call, lparam has no value, and you can't double click on it for details.

The are listed in the Properties view okay.

contemporary style menu, will result in corruption.

What happens, in this testcase, when you move the cursor over the menu item

Windows, there is code that fires in the m_windows.selected event. The code

is changing the menu item properties. The problem is any menu item you select

after this, will show incorrect menu items under the dropdown.

The menu also has 4 level of inheritance.

1) User specifies SccMultiCheckout=1 in PB.INI

2) No entry in PB.INI and SCC vendor responds positively to SccIsMultiCheckoutEnabled API function request.

Multiple checkout feature is disabled whenever:

1) User specifies SccMultiCheckout=0 in PB.INI

2) No entry in PB.INI and the SCC vendor does not support the SccIsMultiCheckoutEnabled API function request.

and "pbcattbl" automatically. But when you drop this table, these corresponding rows saved in

pbcatcol and pbcattbl will not be deleted.

PB Version and Build: 10.2.0_8100, 10.2.1_9004 and 10.2.1_9537

DB/DLL: ODBC ASA EASDemoDB

Comments:

When calling a PB COM component deployed into COM+ Server, it fails when called for 2nd or 3rd time.

using the custom header security service.

Getting a ebayapi is not properly configured or not found or disabled

How C# makes the ebay call:

using System;

using TesteBaySoap405.com.ebay; // use your project name here

namespace TesteBaySoap405 // use your project name here

{

class GeteBayOfficialTime

{

[STAThread]

static void Main(string[] args)

{

string endpoint = "https://api.sandbox.ebay.com/wsapi";

string callName = "GeteBayOfficialTime";

string siteId = "0";

string appId = "yourAppId"; // use your app ID

string devId = "yourDevId"; // use your dev ID

string certId = "yourCertId"; // use your cert ID

string version = "405";

// Build the request URL

string requestURL = endpoint

+ "?callname=" + callName

+ "&siteid=" + siteId

+ "&appid=" + appId

+ "&version=" + version

+

"&routing=default";

// Create the service

eBayAPIInterfaceService service = new eBayAPIInterfaceService();

// Assign the request URL to the service locator.

service.Url = requestURL;

// Set credentials

service.RequesterCredentials = new CustomSecurityHeaderType();

service.RequesterCredentials.eBayAuthToken = "yourToken"; // use your token

service.RequesterCredentials.Credentials = new

UserIdPasswordType();

service.RequesterCredentials.Credentials.AppId = appId;

service.RequesterCredentials.Credentials.DevId = devId;

service.RequesterCredentials.Credentials.AuthCert = certId;

// Make the call to GeteBayOfficialTime

GeteBayOfficialTimeRequestType request = new GeteBayOfficialTimeRequestType();

request.Version = "405";

GeteBayOfficialTimeResponseType response = service.GeteBayOfficialTime(request);

Console.WriteLine("The time at eBay headquarters in San

Jose, California, USA, is:");

Console.WriteLine(response.Timestamp);

}

}

}

How PB makes the call:

ebayapiinterfaceservice lnv_ebay

getsearchresultsrequesttype getsearchresultsrequest

getsearchresultsresponsetype getserachresultsresponse

customsecurityheadertype security

security.ebayauthtoken = "XXXXXXXXXXXXXXXXXXXXXX"

security.credentials.devid = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX'

security.credentials.appid = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX'

security.credentials.authcert = 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXX'

getsearchresultsrequest.query = 'PowerBuilder'

SoapConnection sc

long ll_sc

sc = Create SoapConnection

sc.CreateInstance ( lnv_ebay, "ebayapiinterfaceservice" )

getserachresultsresponse = lnv_ebay.getsearchresults( getsearchresultsrequest )

Destroy lnv_ebay

But after migrating to PB 10.2.1, the code only works if the file does not currently exist (only the first time). Once the file exists, the new file is not valid (Replace! writemode option) in PB 10. You can open the first time file and see it is fine, and then open a replaced file and see it has weird characters and blanks.

A workaround is to delete the file if it exists and then create it again.

CR Resolution: The UDL file is a unicode file and the techdoc code does extra stuff to insert the unicode header characters and 00 bytes after each character in Ansi mode to make it a valid UDL file. Now since PB 10.0 is unicode enabled, this extra stuff is no longer needed. So the changes to make are:

1) Delete the of_filewrite function (that inserts the 00 bytes) and replace it with PowerBuilder FileWrite calls.

2) Include the encoding argument of EncodingUTF16LE! in the FileOpen call.

3) Delete the line of "FileWrite(ll_fh,"~hff~hfe")" after the FileOpen.

only with "halt close".

No workaround.

too much vertical gap if you compare it to Office Word 2003.

the following error returns:

LoadLibraryError

The PowerBuilder runtime DLLS could not be loaded

Used the following object tag:

<OBJECT NAME="PBRX1" WIDTH=225 HEIGHT=83

CLASSID="CLSID:AAAA1304-AAAA-1000-8000-080009AC61A9">

<PARAM NAME="_Version" VALUE="65536"></PARAM>

<PARAM NAME="_ExtentX" VALUE="5962"></PARAM>

<PARAM NAME="_ExtentY" VALUE="2164"></PARAM>

<PARAM NAME="_StockProps" VALUE="0"></PARAM>

<PARAM NAME="PBWindow" VALUE="w_window"></PARAM>

<PARAM NAME="LibList" VALUE="http://localhost/window_activex.pbd;"></PARAM>

<PARAM NAME="PBApplication" VALUE="rknnt"></PARAM>

</OBJECT>

Close(parent)

Close(w_mdi)

Although both windows close, the PB IDE does not get reactivated. If you bring PB IDE back to the front and exit, you will still see a PB100.EXE process in Task Manager. POSTing the calls to Close have no effect.

This is a regression from build 8035 where it works OK. CR 161515 was fixed just after this, and has apparently caused the regression.

is set for the connection, a -766 - String must be null terminated error

will result when you try to update a column.

According to Informix:

String must be null terminated.

With IBM Informix ESQL/C, if you use a host variable in an INSERT statement or in the WHERE clause of an SQL statement, and the database is ANSI compliant, the string must be null terminated.

This came in as a DataWindow.NET enhancement request but applies also to PowerBuilder.

PB Version and Build: 9.0.3_8546, 9.0.3_8614

DB/DLL: JDBC (connecting to Oracle 10g via Oracle JDBC Thin Driver)

Comments:

Oracle DATE columns are retrieved into PowerBuilder 9.0.3 (Windows), PBVM 9.0.3 (AIX and Sun) without the time part. Only date part is retrieved.

to build 9557 is now getting the following error:

Application access violation error

FAULTING_IP:

pbshr100!PbHeap_free+270

10bc6300 895004 mov [eax+0x4],edx

The SIP button does not always appear on the window like it should. Seems to be related to the 2-wide menu feature. When the menu is made 3-wide the SIP appears.

the UDDI profile is being saved to:

HKEY_CURRENT_USER\Software\Sybase\PowerBuilder\11.0\UDDIServerProfiles

It should be saved to:

HKEY_CURRENT_USER\Software\Sybase\PowerBuilder\10.5\UDDIServerProfiles

When you select the 'Search For UDDI' from the web service proxy wizard,

there is a dropdown for UDDI Profile, provide several default profiles.

The customer suggested:

http://localhost/juddi/inquiry (EAServer)

http://localhost/uddipublic/inquire.asmx (Windows 2003)

then clickiing the 'Save Profile' cb, a message appears:

Information

Save UDDI profile failed

It is not clear why the UDDI profile failed. Improve the error message so that

it clearly states that the UDDI profile failed because the profile name was not entered.

are returned to the itemsearchresponse structure

itemsearchresponse = lnv_amazon.itemsearch( itemsearch)

There is missing data. If it prints in portrait mode, all data is printed (but on different pages of course.)

you select Design/HTML Preview, the value in the <TABLE> tag in the html source is not what was entered in the property field.

Save problem when you use dw_1.saveas("C:\dw_one.html",HTMLTable!, FALSE).

Dump file available for analysis.

ERROR: OBJECT_NOT_EXIST (p11177617/n_test/$Activate - bind)

Jan 30 15:38:56 2006: PB INTERNAL EXCEPTION on: Thread : 2688, Address : 0x10E6D34E, Type : EXCEPTION_ACCESS_VIOLATION reading address 0x00000000. CPB_Component::destroy

In Hebrew/Arabic applications, the toolbar is set at the left of the window when it should be at the right. Custome is asking for a RTL property for the toolbar.

This property should be selected on the programer purpose because Hebrew or English applications may be runnning on the same machine.

and using RPC, PB will return the following error:

The parameter of type 111 did not have a valid value

Problem only happens the first time calling the stored procedure dbo.RefreshMVControl.

RefreshVMControl calls the RefreshMVAppraisal.

Works ok if the datetime parameters are defined locally. When the datetime parameters are set as instance variables and the PropMeasure table is empty, then error

happens when calling the dbo.RefreshMVControl.

From engineering: The RichText control is provided from a third party. They do not support the border styles and have no plans at this time to add support. This cannot be resolved within PowerBuilder.

The standard window properties:

ShowSIPButton and SmartMinimize and CloseButton

are not being properly filtered out in the PK -> PB Migration

PowerBuilder doesn't cleanup the memory correctly. In each loop memory will be lost.

and .tif file types.

InsertPicture should also be documented under "RichTextEdit control changes"

insertpicture. Example shows 2 different *.tif files. One will display ok

in the rte control and the other one will return -1 on insertpicture.

Behavior varies with Regional settings. Sometimes there is a leading zero. Examples:

Mask: German: English :

###,##0.00K 045.700,00K 045,700.00K

#,##0.00EUR 4.570,00EUR 4,570.00EUR

#,##0.00€ 45.700,00€ 4,570.00€

Solution: The mask must be large enough to handle all digits. EG: change #,##0.00EUR to ##,##0.00EUR. For the leading zero, if there is an ASIS char in the format string, such as 'K', or "EUR", then the format will be manipulated in an ASIS state. In that state, the mask '#' is the same with mask '0'.

The PocketPC SIP-UP and SIP-Down events should only go to the window with focus (the active window). It seems that the event goes to all the windows.

A condition to test is a response window that's the parent of another response window. All of which are on a main window.

the method will return the following error:

Error calling method of a pbni object"

Works ok in PB 10.5 using .Net engine

SELECT owner, object_name FROM ( SELECT owner, object_name, subobject_name FROM all_objects WHERE owner = :arg ) ORDER BY owner, object_name ;

PowerBuilder 10 correctly reports an error to the user.

A Datawindow SetItem has an expression that adds 2 decimals together for the value argument to be set. This works the first time, but executing it a second time crashes PB.

This is a regression that started in release build 8580. Prior builds worked fine.

This also fails in the current builds on 10.2.1 and 10.5, but in both of these versions you can see that the value set in the datawindow the first time is not correct as it was in PB 9.0.3. The second SetItem still crashes PB.

If you take the addition expression outside of the SetItem, do it in a statement before the SetItem, put the result in a variable, and use the variable in the SetItem, then it works. But this is not an acceptable workaround for many existing applications.

Customer has tried but cannot reproduce the problem and at this point the crashes although numerous appear random.

PK 2.0.4 error specific.

ASA 9.0.2.3044

When running a special version of the customer application, there's a loop which retrieves() into a datastore. This would kill the application (a quiet evaporation) on both the desktop and the device.

Workaround: GetIdentity='select scope_identity()'

Problem has been verified fixed in PB 9.0.3 build 8652, PB 10.2 build 9593, and PB 10.5.

Fix may exist in earlier maintenance builds of PB 9.x and PB 10.x as well.

Remote procedure calls with unitialized Oracle OUT or IN OUT parameters give the following errors:

- ORA-03106: Fatal two-task communication protocol error

- ORA 03120: Two task conversion routine integer overflow

With the O90 or O10 interface the following is returned:

- ORA-24334: no descriptor for this position

When executing a PBScript containing dw expression, PowerBuilder crashes. This is a regression. Works fine in PB 10.2.0_8100.

datawindow.importstring(XML!, ls_myxml )

It is discoverd that the importstring function fail to handle Simplified

Chinese or Traditional Chinese. That make the datawindow item buffer either messed up or get empty (non-printable ?). This eventually cause datawindow send out incorrect sql statement to database.

Part of the groupbox of a next row can be drawn at the bottom of the datawindow when it should have been drawn on the next page.

PB Version and Build: PBVM 10.2_7516 for Sun Solaris using EAServer 5.2

DB/DLL: N/A

Comments:

When a PB NVO component code execution encounters a SELECTBLOB, the code is ended prematurely and skips to deactivate event of component. This issue is Sun Solaris localized. For PBVM on Windows, issue does not happen (tested 10.2.1_9537 PBVM).

Customer is concerned that us use of Informix features such as stored procedures and other

Informix SPL commands will be impaired without a PB native driver for Informix 10. He believes that using generic interfaces such as JDBC, ODBC, etc. would require extensive recoding and testing and that all of the needed functionality may not be in generic drivers.

This is caused by expressions in a column. Removing this expressions and the error message is gone.

" Error: Failed to find the proxy to represent the Java class "

if calling a method of a Java class.

PB Version and Build: PBVM 9.0.3_8004 on Sun Solaris

DB/DLL: JDBC with Oracle Thin Client

Comments:

Character � is displayed incorrectly when retrieved into PB client from within PBVM via SetFullState.

So there are 3 problems. The first 2 problems below happen on both Windows 2000 and XP new style or classic style.

1) StaticText objects that use accelerator keys (&) always display the underscore even when the Windows setting says to hide them until ALT is pressed.

2) Command buttons that use accelerator keys (&) do hide the underscore when the Windows setting says to hide them. But pressing ALT does not display the underscores as it should.

3) If on Windows 2000, or on XP and PB set to not use new style controls, if the Windows setting is set to Hide the underscores, the command buttons do not initially hide. If you then toggle and apply the Windows setting to not hide and then to hide, the command buttons then start to hide underscores correctly. So command buttons don't pick up the initial Windows setting. (Neither do StaticText objects)

Both command buttons and StaticText should work as the menus do with displaying accelerators according to the Windows settings.

Note that in all cases the actual accelerator keys when pressed with ALT do work, it's the hiding of the underscore or the display of the underscore that is incorrect.

OS: All

No workaround.

moving the cursor over the string value will display the value.

Provide a way so that users have the option whether they want to display

this value as a tip or not.

breakpoints, if you are stopped on a breakpoint and you select edit breakpoints,

highlight the breakpoint that you are stopped on. It will be easier to set

an occurrence or condition.

FROM ENGINEERING: This is the design style for PowerBuilder so this will not be changed.

datawindow activex, the column borders are not displaying.

Column borders are saved ok with the psr. If you open psr in IM or PB, you can see

the column borders ok.

Customer wants a setting for the SIP that always leaves the SIP manually in the user's control. In PK 2.0.4 build 942 modifications to the SIP behavior were done to make the behavior consistent across OSes and devices, and to incorporate changes requested by other users. Currently, if the SipOnFocus checkbox is NOT selected, if the user runs an app, places the cursor on an editable control, and brings up the SIP, moving to another control that also has the SipOnFocus NOT selected causes the SIP to disappear. This was requested by several users. For this user, however, the functionality is inconvenient for some of his users. He would like the option to have the SIP remain unchanged (either if up, stay up, OR if down, stay down) when the user moves focus through editable controls on a window AND fields on a datawindow when the SIPonFocus option is turned of (Not selected.) Customer still wants to be able to control SIP behavior within the code by using SetSIPPreferredState, but wants the default SIP behavior (with no explicit code) to have the option to not change the SIP from it's current state

set by the user.

-- Solution starting with 2.0.4.944 --

Added internal property to disable/enable all automatic SIP handling.

To use:

a) In your PowerBuilder code, declare the external function:

function integer SetRuntimeProperty( &

readonly string PropertyName, boolean fValue ) &

system library "PKVM20.DLL" alias for "fnSetRuntimeProperty"

b) To disable ALL automatic SIP handling:

SetRuntimeProperty( "AutomaticSIPHandling", FALSE )

c) To enable ALL automatic SIP handling:

SetRuntimeProperty( "AutomaticSIPHandling", TRUE )

ADO.NET and the Microsoft.Jet.OLEDB.4.0 Provider, PB will crash when trying

to create a Quick Select Datawindow.

Jet OLEDB 4.0 provider, once you built and save a dw, you get the following error

if you try to go back to the dw source in graphic mode:

Microsoft JET Database Engine

The parameter is incorrect

Do you want to continue in graphic mode?

With "Show SIP on Focus" turned off, when you are editing a field in a datawindow, moving the cursor within the input field using the stylus causes the SIP to disappear. Same problem does no occur when modifying data in an SLE on a window.

-- Solution starting with 2.0.4.944 --

Added internal property to disable/enable all automatic SIP handling.

To use:

a) In your PowerBuilder code, declare the external function:

function integer SetRuntimeProperty( &

readonly string PropertyName, boolean fValue ) &

system library "PKVM20.DLL" alias for "fnSetRuntimeProperty"

b) To disable ALL automatic SIP handling:

SetRuntimeProperty( "AutomaticSIPHandling", FALSE )

c) To enable ALL automatic SIP handling:

SetRuntimeProperty( "AutomaticSIPHandling", TRUE )

PB Version and Build: 10.2.1_9537 and EAServer 5.3 on Windows

DB/DLL: EASDemoDB

Comments:

Today, we can use a maximum of 5 arguments when retrieving a web dw from EAServer. Customer has a long number of arguments and would like to have the ability to use 12 or 13 arguments in web datawindow in future.

PB Version and Build: 9.0.3_8546 and 10.2.1_9537

Comments:

When scrolling a DW with a PSR content down and up again, some portions of PSR content get blank in DW display.

Workaround: Edit the source of the DataWindow and change procedure call For example:

procedure="1 execute dbo.byroyalty;1;0 @percentage = :percentage" arguments=(("percentage", number)) )

MUST BE CHANGED TO :

procedure="1 execute dbo.byroyalty;1 @percentage = :percentage" arguments=(("percentage", number)) )

following message results:

Warning: A full or incremental rebuild should be performed. The following object(s) may not be usable in their present state. x509certificatechain

In datawindow runtime, if editmask is set to 00 with Autoskip enabled, when positioning cursor at beginning of editmask and typing 1st digit (like |00 ), cursor skips prematurely to next column without letting user to type the 2nd digit.

If you change the editmask to 000, then autoskip works with no problems.

A (DataWindow) Retrieve on a SELECT FOR XML statement fails

when connected through SQLOLEDB but works fine with an ODBC connection.

shows the path for the pb10.5 install.

HKEY_current_user\Software\Sybase\PowerBuilder\11.0\InitPath

"Parsing attributes of a column object in an ALTER or CREATE is not currently supported."

In PowerBuilder 10.2.1 Build 9517 and higher the focus skips prematurely

to the next column after entering the first digit with editmask '##'

The editmask '###' works normal.

Class cast error with EJB Client and 3rd party Application Servers

cannot assign instance of [Ljava.lang.Object; to field xxx.selection.ConditionItemPar.data of type [xxx.selection.ConditionItemData; in instance of xxx.selection.ConditionItemPar ]

evaluating properly.

The following expression is expected to return test1.00 but is returning null:

s1 + d1

where s1 = test and d1 = 1.00

Works ok when using a number, ulong, long and real datatype: For example,

s1 + r1 will return test1

s1 + n1 will return test1

s1 + l1 will return test1

s1 + u1 will return test1

where s1 = test and r1 (real) = 1

where s1 = test and n1 (number) = 1

where s1 = test and l1 (long) = 1

where s1 = test and u1 (ulong) = 1

The only related CR found was CR 409840 with the resolution below and the PB Runtime Packager does package everything up and register the control when used.

From CR 409840:

Since PB10.5 introduce a new TX to PB, if customer want to use RTE control or Datawindow in runtime & designtime,they should register tp4ole11.ocx and include all files under $\shared\powerbuilder\TXControl & Pbrtc105.dll. Add a component for new RichTextEdit Control and RichText Datawindow in PB runtime packager.

This only works when the deployed machine has the application and all the deployment dlls and does not work when the deployed application is run from a file server. As many large corporations use this method for deploying applications is there any solution for this deployment scenario when using the new Rich Text Edit Control in PB 10.5?

with Label DataWindows when Acrobat 4 PDFWriter 4 as default printer.

The exception occurs when exiting the application.

The customer is connecting to an ASE 12.5.3 database using Kerberose network security. While connecting she uses following profile:

// Profile TESTINGKERB

SQLCA.DBMS = "SYC Adaptive Server Enterprise"

SQLCA.Database = "master"

SQLCA.ServerName = "SADSSYBTESTDEV1"

SQLCA.LogId = "kubotei"

SQLCA.AutoCommit = False

SQLCA.DBParm = "Release='11',Sec_Mechanism='csfkrb5',Sec_Server_Principal='SADSSYBTESTDEV1/sactgx0008.us.db.com',Sec_Network_Auth=1"

And they get error:

ct_connect(): Security service layer: Internal Security control layer error: Security service provider internal error -1765328377 occured

Explanation for -1765328377 error -

KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN Server not found in Kerberos database

This is because the DBParm Sec_Server_Principal is limited to 30 characters and it gets truncated and the error occurs. The same limit is also present for servername.

The logid is in the format username@client_principal_name or it fails and prompts for a logid. Note that the password is correctly not requested.

Since PB 9.0.3 up to PB 10.5, the behaviour has changed.

Caused by CR 381722. Documentation is inconsistant.

When changing the MenuImage in the Toolbar very often (> 1000), the operation becomes very slow and memory is leaking.

retrieving error messages from the PFC Error Service.

Customer using the pb9 pfc. Problem happens in development and executable. Using

Informix and the IN9 driver. Problem happens when retrieving.

The pbtrace.log shows:

(a127b0): DIALOG CONNECT TO TRACE IN9 INFORMIX-9:

(a127b0): USERID=cxxxxxxx

(a127b0): SERVER=xxxxxxxxxxxx@tecsysdev

(a127b0): DATA=vvvvvvv (4866.783 MilliSeconds)

Customer submitted the following dump file:

FAULTING_IP:

pbdwe90!dwTblAddItem+245 [dwtretr.cpp @ 647]

1162d555 8b02 mov eax,[edx]

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 1162d555 (pbdwe90!dwTblAddItem+0x00000245)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 3032323b

Attempt to read from address 3032323b

STACK_TEXT:

0012cdac 11630912 01b7ba74 00000001 00000001 pbdwe90!dwTblAddItem+0x245 [dwtretr.cpp @ 647]

0012cde4 1162e74b 0197b520 01a78008 7ffffffd pbdwe90!dwTblSelectRows+0x242 [dwtretr.cpp @ 2866]

0012ce94 1162dc34 01979830 00b02da0 00000000 pbdwe90!dwTblInsertSelect+0xa0b [dwtretr.cpp @ 1535]

0012cef0 1162cc91 01979830 00b02da0 00000000 pbdwe90!dwTblInsert+0x44 [dwtretr.cpp @ 946]

0012cf28 11501d1d 01970001 0197b520 00b02da0 pbdwe90!dwTableRetrieve+0x271 [dwtretr.cpp @ 255]

0012cf90 11684b8c 00000000 00b02da0 00a06d70 pbdwe90!datawindow::Retrieve+0xed [dw.cpp @ 642]

0012cfc4 10c70753 00a06d70 10c7076c 00b02da0 pbdwe90!DW_Retrieve+0x1ec [fndwm.cpp @ 798]

0012d020 10c703d0 00000000 01958118 001200c1 pbvm90!OB_RUNTIME_CLASS::invoke+0x373 [obclass.cpp @ 2404]

01958118 019581c4 00000009 0000000f 0000000f pbvm90!OB_RUNTIME_CLASS::invoke+0x1f0 [obclass.cpp @ 2233]

WARNING: Frame IP not in any known module. Following frames may be wrong.

10dd9cb8 10c866e0 10c866f0 10c90ef0 10c8feb0 0x19581c4

10c866c0 000000c7 02b80000 c2800040 9090000c pbvm90!OB_OBJECT::AddRef [d:\pb90\runtime\h\obobject.h @ 237]

to client.

It appears that syntaxfromsql has several problems.

1) There is no value for print.preview.buttons

2) Font.face has no value

3) The return string from the createdw() appears to be truncated.

If you add a len(dwsyntax_str) in the createdw(), you will see that it

returns 2032. Once the dwsyntax_str returns to the client, the len(dwsyntax_str)

will return 925.

Printing problem where the application hangs (seems to crash) when communication to printer cannot be established OR when communication is broken during printing.

Environment:

Pocketbuilder V2.0.4.940

Symbol 9090 with Windows Mobile 5.0.1.0070

O'Neil Printer V6.67

Fieldsoft V2.950

Bluetooth Communication

Scenario:

Field delivery print customer invoices from the field. Printing works for

the most part but they average 3 failures out of printing 20 invoices.

Intermec model HH has the same problem but fails more often.

Datawindow print routine:

// Register code for fieldsoftware.com - 3rd part printing software.

SetRegistrationCode(1, "xxxxxxxxxxxx")

// Bypass printer settings prompt window.

PrintSetupPrinter("", "", 14, 6, 1) // 6=COM5 // 14=O'Neil

// Remind user to wait for printing to finish before continuing.

Open(w_message)

w_message.st_message_1.Text = "Waiting..."

w_message.st_message_2.Text = "Please wait until printer has finished printing."

w_message.cb_ok.Visible = False

// Print datawindow.

This.Print()

Close(w_message)

**** Printer connection failure, then application waits forever

ok in IDE.

AILED_INSTRUCTION_ADDRESS:

+0

00000000 ?? ???

FOLLOWUP_IP:

pbvm100!ob_destroy_rtinst+4e

10c51b5e 8b54240c mov edx,[esp+0xc]

large web datawindow report. You can see the problem when you click on the

Last page button. You can no longer can get focus on a column and itemchanged event

doesn't get fired because column focus no longer works.

When changing the SQL statement in syntax mode of existing crosstabs then

tablenames are prepended before crosstab columns

when the select includes multiple tablenames or an alias

Input Fields. All Data Value turn into "??".

Tested and reproduced with PB 10.2.1_9597

In runtime, web datawindowParameter does not return rows after 2 or 3 PageNext in webdw, when placing a new parameter and querying dw again, the datawindow returns empty.

Using Mobilink Synchronization, minor doc changes needed:

1) Page 184 - Refers to Powerbuilder 10 instead of PowerBuilder 10.5

(Under Consolidated and remote databases)

2) Page 201 - Bottom of page it refers to dbmlsrv8 instead of dbmlsrv9

If you've a datawindow you can enter for instance only a minus - in a numeric column.

If you tab out and do a retieve the datawindow build a wrong SQL.

With the new RichText control to open pervious version (PB9, PB10.x) RichText file,

some of the Inputfield cannot be recognize and only be regarded as plain text.

414463 with SetRemote. I tried the solution to that CR, setting the environment variable PB_DDE_ANSI to true. But it does not work in this case.

getting a Unexpected Signal 11 occured under user-defined handler 0xff340004

An unexpected exception has been detected in native code outside the VM.

Unexpected Signal 11 : occurred at PC=0xFDF47558

Function name=realloc

Library=/usr/lib/libc.so.1

Problem happens just calling up the jsp page. Turning on the component trace shows

the DataWindow/HTMLGenerator105 (create container) and DataWindow/HTMLGenerator105

(constructor) were processed.

DBCS string to the second row.

If the datawindow has a text object called t_1. The code is:

dw_1.object.t_1.text = sle_1.text

If the string value (sle_text) is yes or no, PB gives a system error. All other string values get assigned OK.

Code Examples, the following error results:

Invocation Error

Error opening the SRL file.

Workaround:

The uo_edgar/cb_invoke/clicked has the following:

sHTML = px_Service.processSRL("EDGAR.SRI","EDGAR", sle_term.text)

Works ok using the following and according to the http://www.SoapClient.com/xml/SQLDataSoap.wsdl :

sHTML = px_Service.processSRL("/xml/EDGAR.SRI","EDGAR",sle_term.text)

results in the following error:

Unable to connect to remote server

When trying to redeploy the proxy (p_ws_07_stockquote), getting the following

error:

Cann't access the WSDL or the WSDL file is invalid

Trying to call the netxmethodsservicesstockquotestockquoteservice.getquote() webservice

(uo_stockquote/cb_invoke/clicked)using the following wsdl:

http://services.xmethods.net/soap/urn:xmethods-delayed-quotes.wsdl

PB Version and Build: PowerBuilder 10.5_5034

DB/DLL: N/A

Comments:

When regenerating one of the objects inside a PBL, sometimes the regeneration returns the following error message:

Assertion Failure

Invalid type in cm_intrisic_trim, file cmintrin.cpp, line 2905

Abort, Debug Break, Ignore?

Sometimes, the regeneration goes fine, sometimes the above error happens.

running application exe.

Same app works ok in PB 7. Migrated app to PB 10 and errors happen when

running application exe. Works ok in IDE. The customer is using PFC from PB7

and is not forcing garbagecollection. They are not using garbagecollect().

The app uses db2 connecting to odbc with a neon driver.

The crash dump shows the following:

FAULTING_IP:

pbvm100!ob_run_garbage_collection+142

ExceptionAddress: 112663f2 (pbvm100!ob_run_garbage_collection+0x00000142)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 00000002

Attempt to read from address 00000002

calling dw.print(), the dw will print to the previous printer.

Using dw.print(true,true), the print dialog appears but the printer highlighted

is the one before the printsetprinter was called.

IE browser refresh and then moving the browser to the background. When you

bring IE back to the foreground, the DW Activex doesn't display anymore.

Problem appears to be related to MS security patch 912812.

From KB 917425:

This rereleased compatbility patch resolves a display issue for ActiveX controls that

were developed by using MS VB Security update 912812. May prevent a VB script

from controlling the visibility of these ActiveX controls.

When you deploy this patch, it disables the behavior of the Internet Explorer ActiveXupdate that is contained in update KB 912812. The security updates that are

contained in update kb912812 are still present and are still functional. Only the

Internet Explorer Activex update behavior that is described in update kB912945 is disabled.

following error results:

Error calling method of a PBNI object

Using the following script:

if isValid (new1document) then

new1document.savedocument(".\test2.xml")

end if

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PB 10.5_5034

Database/Driver File/Version: ASA 9.0 EASDemoDB10

Comments: In runtime, the retrieve() of a crosstab for 2nd or 3rd consecutive times causes GPF in PB.

Versions and Build #s Tested: PB 10.5_5034

Database/Driver File/Version: N/A

Comments: When issuing the following piece of coding for Rich Text Datawindows (only), the code still triggers the Print Dialog, ignoring the "false" argument in PrintOpen()

job = PrintOpen( string(1) , false )

PrintDataWindow(job, dw_1)

PrintClose(job)

when the application is going to be closed. A Dr. Watson error is generated.

working as expected.

The sp defines 2 bit arguments:

@mybit0

@mybit1

The Declare statement is passing in:

@mybit0 = 0

@mybit1 = 1

After the Fetch call and 'Include Output Argument' is checked then both

the first 2 columns in the datawindow are 0. If you leave 'Include Output

Argument' unchecked, than the second column (which is expected to be 1) is -1.

Versions and Build #s Tested: PB 10.5_5034 and PB 10.2.1_9597

Database/Driver File/Version: Ingres 3.0 with respective Ingres 3.0 ODBC Driver

Comments: UPDATEBLOB does not work when connecting against Ingres 3.0 ODBC driver. The issue does not occur when connecting to ASE or ASA databases.

30 character limit . This is a new feature in ASE 15.

If you open the descendant window in the painter after deleteing the control on the ancestor, it tells you that there are undefined references and you need to save the object to remove them.

This is an enhancemet request to have a warning message if you delete a control on an ancestor window (or other appropriate objects), telling you that you must open all descendant objects in the painter and save them before rebuilding.

an Informix server, char fields are retrieved back padded

to the right of the data. You are unable to update a character field unless

you delete the characters or padded space first.

Problems happens connecting to Informix 9 server using Informix client 2.81

or 2.9 with:

PB 9.0.3 - not ok

PB 10.2.1 - not ok

PB 10.5 - not ok

Connecting to Informix 7 server using either Informix client 2.81 or 2.90 with:

PB 9.0.3 - not ok (changed from ok to not ok - revised on 7/7/2006)

PB 10.2.1 - not ok

PB 10.5 - not ok

columns line up vertically for all the rows. But now in 10.5 that property has been obsoleted, and his datawindow is a mess. This is a request to reinstate the fixedsize property (both in the painter and at runtime) for richtext columns.

A PowerBuilder 10 crash occured within EAServer when testing with restricted resources.

the variable is a constant, the following error appears when you try

to compile the window:

Error: C0189: SQL host variable or SQL name cannot be a constant or

read-only variable,

Using the following sql:

constant long ll_idd = 20

select rb_department.dept_name into :ls_name from rb_department where rb_department.dept_id=:ll_idd;

RESOLUTION: Unable to fix by design.

PER ENGINEERING: This is not a bug. The following changes will correct the problem:

Copy dependent dlls(under the directory of PBFP\dll\ in test case) to the same directory as 11256726_PBFP.pbx. This will fix the issue of "The file is not a valid dll or pbx file. "

Also change the content of method PBX_GetDescription() inside pbfp.cpp.Change connect and disconnect to some other names because of conflicts with PowerBuilder keywords.

no workaround

Cannot convert to a date/time"

when retrieving the column.

In PB 9.x it will display '??.01.0000' and retrieves ok.

disconnect when the FreeDBLibraries is checked, in the application object, will

cause the following error:

Unable to initialize Client Library Context

In the sybinit.err, the following error is logged:

Open Client Message:

Message number: LAYER = (5) ORIGIN = (3) SEVERITY = (5) NUMBER = (131)

Message String: ct_init(): network packet layer: internal net library error: There was an error encountered while initializing Net-Library.

Problem happens using the SYC driver.

Versions and Build #s Tested: PB 10.2.1_9597, PB 10.5_5034

Database/Driver File/Version: ASA 9.0 EASDemoDB10

Comments: When dragging and dropping all windows from layout into Export/Import XML Template window, it will alter the layout as default, but next time you try to open the dw painter, PB crashes with GPF.

For clients that have the appropriate print drivers local, it works ok.

The customer has contacted Citrix and Citrix is asking specifically if PB is sending the data to the printer in RAW or EMF format.

graph, causes graph to change. There is no script in the clicked event.

Dw with 2 group levels contains a graph object in header of group 1.

causes the dw graph object to change.

Group dw contains graph object in header of group #1.

Problem happens for on a group dw with a graph object in the first header group.

PB 10.5 is much slower than PB 10.2.1 or PB 9.0.3.

Using the following code:

declare cur cursor for

select mw_test_ase.test_id, mw_test_ase.test_name

from mw_test_ase

using sqlca;

open cur;

do while (sqlca.sqlcode = 0)

fetch cur into :li_id, :ls_name;

loop

------------------

OS: Windows XP SP2

PB Version and Build: PB 10.2.1_9637 and old PB 7.0.3_10243

DB/DLL: N/A

Comments:

The CreateMutex external function call is not working as expected: If no {;ANSI} is declared in external function call, CreateMutex call will identify different applications as if they were the same and returns 183. If {;ANSI} is declared, 2 instances of same application will never de detected as equal - will never return 183 in CreateMutex.

When running a PowerBuilder 10 application under Terminal Server

a wrong keyboard setting may be used.

value of 1/1/2019.

When you run the same code in PB 9.0.3, it will return as 1/1/1900.

RESOLUTION: When using the Date('string') function, pb will try to match a date format (from regional settings). When it can't find a complete match, a part match will happen.

For example, if you use Date('01-JAN-1900') pb will convert it to 1/1/2019. It

finds a part match (dd-MMM-yy), it then parses the first 2 numbers of the year and it

gets 19. The 2 digit year will be interpreted as a year between 1930 and 2029, thus it gets 2019.

printed output is missing part of the dw.

The workaround is to set autosize height on the bands and all the objects.

Workaround: Set Autosize Height on for the Detail band as well, even though it is not set on for any of the columns in the detail band.

a method on the java class and calls another method which creates a thread and

after 5 seconds will issue a System.exit(0) in java. PB will hang at this point.

Background Info:

App opens: Memory: 6,620K; Thread count: 3; Modules: 31; Description: Opening the window simply displays the window and initializes the "Number of calls" field to 2.

Initialize: Memory: 11,720K; Thread count: 9; Modules: 39; Description: This step creates a user object which creates the JavaVM, EJBConnection, and initalizes the proxy object.

Run: Memory: 11,844K; Thread count: 9; Modules 39; Description: This step executes the speedtest Java class which simply adds a large number of doubles. The number of times of class execution is specified by the "Number of calls" field. The datawindow displays the time taken to execute the class.

Reset: performs a Reset() on the datawindow. No change in resource utilization.

StopJava: This will invoke a method in Java which creates a thread and after 5 seconds will issue a System.exit(0) in Java. About 5 seconds after clicking this button the application will lock up and I will have to use Ctrl-Alt-Delete to manually kill the app.

De-Reference: Memory: 11,548; Thread count: 9; Modules: 38; Description: This step destroys the user object containing the calls to create the JavaVM, proxy, and EJBconnection. References to the proxy object are set to null and destroyed.

RESOLUTION: There are no DestroyJavaVM or similar interface.We always do not destroy it before current thread is destroyed.

If PB initiated the createjavavm,It can not shutdown or unload the jvm too.It is because it can not create it again.We actually try do this before.But failed for the reason of JVM does not support it.

Also the microhelp field at the bottom of the window is not displayed.

This is what I would have expected to happen but in all versions of PB tested PB 8 through PB 10.2.1 the truncation does not happen until PB 10.5 GA. Works the same when using a datawindow.

Customer's application uses this in many places and although he knows how to correct it he would like to know if this change in behavior is intentional.

be saving the 'print all pages' in the page.range and a

subsequent dw.retrieve and dw.print(true), will print the total pages incorrectly.

For example : the GPL 7.6 or AFPL Ghostscript 8.14 will cause problems.

No problems using AFPL Ghostscript 8.54 and PB 10.5.

manual, it list the additional PowerBuilder runtime files under

Table 41-4. In the PB 10.5 App Techniques manual, it list pbdwe105.pbd

incorrectly. It should be pbdwr105.pbd.

Workaround: In this case, the data began with "In" which happens to be a SQL operator. The PB parser apparently is confused and thinks "In" is part of the criteria but the syntax for the rest of the statement is not correct. A similar problem occurs it the data starts with "Like". In that case, there is no error because the SQL syntax is correct, but the Select statement is not really what the user wants. It will have the Where Clause or "Like 'value'" instead of "= 'Like value'". If possible in your application, avoid strings in query mode that begin with SQL operators such as "In", "Like", "<", "=", etc.

B Heap Manager Exception:

allocVM(117379072) failed

_______________________________________________________________________________

PB Heap Manager Exception:

MemAllocPtr(type void*, size 74893815) failed

RESOLUTION: Not a bug. Reached maximum memory limits on machine.

the following soap exception appears:

The underlying connection was closed. Could not establish trust

relationship for the SSL/TLS secure channel

After setting the EventLogging to 7 in the registry:

HKLM/System/CurrentControlSet/Control/SecurityProviders/SCHANNEL

The following warning appeared in the Event Logging:

The remote server has requested SSL client authentication, but no suitable client certificate could be found. An anonymous connection will be attempted. This SSL connection request may succeed or fail, depending on the server's policy settings.

But the following informational messages also appeared too:

An SSL client handshake completed successfully. The negotiated cryptographic parameters are as follows.

Protocol: TLS (SSL 3.1)

Cipher: RC4

Cipher strength: 128

MAC: MD5

Exchange: RSA

Exchange strength: 1024

RESOLUTION: Added the following in the pb105.exe.config:

<system.net>

<settings>

<servicePointManager checkCertificateName="false" />

</settings>

</system.net>

the first occurence of a field, the first inputfield of the word document

is always returned.

For example,

rte_1.inputfieldlocate(First!,"transaction_number") will return transaction number

rte_1.inputfieldlocate(First!,"title_number") will also return transaction number

Open the window RTE has focus ignoring the specified tab order of the window.

no workaround

nested data can be corrupted when displayed in the nested DataWindow.

Discovered while testing for CR-422526

When running a special version of the customer application, when poking around, we brought up its cute calculator. When the calculator popup is closed, the application would core.

We see that when the popup closes itself it does things in an "unusual" order. The end result is that it is still referring to the DW after it has been removed from memory.

According to the customer it is expected behavior that the input language is changed for the whole application when you are running and application and change the input language. Not for the window instance or field instance in DWC. It should be for the whole application.

in no rows being returned.

This happens when it is called from a PowerBuilder 10 component deployed to

EAServer 5.2 or 5.3 and not from a PowerBuilder application.

The issue is due to EAServer using ODBC 3 instead of ODBC 2.

Web Service and SOAP message are not designed for large data transfering over internet. It uses HTTP over TCPIP and XML SOAP message as its payload so that adds a lot of overhead to the data transfer.

If the data becomes bigger, the HTTP message will be divided into many packages (called Trunked data). These packages will go over the internet separately and independently. The data flow of a typical Web Service is as follows.

On the Client side:

1. The client gets data of the client application (could be PowerScript or others).

2. open a tcpip connection.

3. construct the payload of SOAP message of the data.

4. construct http header info

5. put the http header and SOAP payload on the wire, then return immediately. If the data is big, it will be divided in trunked package.

6. stop and wait for the data return from the server.

On the Server side:

1. wait for all packages to arrive.

2. parse the data and process.

3. construct the payload for return value in SOAP format.

4. construct the HTTP header.

5. put the http header and SOAP payload on the wire, then return immediately. If the data is big, it will be divided in trunked package.

Once the data is on the wire, it will go from the machine --> DNS server -->FireWall --> Internet. Even if the service is running on the same machine it still will go to LAN and DNS server, then come back again. This is completely different from the direct call (such as datawindow or rpc), which transfers binary data and transfers directly.

The client/server will return immediately (at step 5) after putting the data on the wire. They even didn't check whether go out or not. So putting timing events in the server side or client side (within the function) only can say the processing of data is fast or not (step 1-5). It cannot say anything on the whole performance.

As the service provider, it will put these packages onto the wire, then return back immediately. It doesn't care whether these data transfer to the destination or not, and it also doesn't care whether there is somebody over there to receive it. As a client, it must wait for all the return packages to arrive. Then it could start to combine the data together, then parse the data.

In my experience, 10 times the overhead is quite normal for a web service for a fairly normal volume of data. For large data, it could be more. But I cannot exactly say how much overhead it is because the overhead heavily depends on the network speed and traffic at that time even when you use local machine only.

PB 10.5 does just the opposite. The PB system option Use Windows Classic Style on XP again seems to have no affect checked or unchecked. But in 10.5 a groupbox on a window always has rounded edges (XP style.

In both cases the edges should be rounded if windows classic style is unchecked and square edges in it is checked.

Versions and Build #s Tested: PB 10.2.1_9651 and PB 10.2.1_9637

Database/Driver File/Version: N/A

Comments: The EditMask mm/yyyy now produces "Item does not pass validation test" when typing incomplete data. This was detected as a regression from old PB 7.0.3 where issue worked.

in the *.srx files are missing the line feed.

When using the TextPad tool and you open a *.srx file in binary format, the

first line is terminated with 0D. All the other lines end with 0D 0A.

the files in unicode or have the option to generate them in unicode.

No Workaround

Some solution like the Design -> Options -> Script menu where you can disable Warnings, for all Library operations, like Regenerate, Migrate, Full Build, and Check out.

This request is based on "CR 431911 PB 10 regression, getting false warnings when migrating / rebuilding" where a enviroment varaible was implemented to supress a warning introduced / caused by CR 407177.

With the new Byte datatype there is also a new parmtype TypeByte! introduced for

use in dynamic SQL format 4 SQL statement using the SQLDA object.

The Byte datatype matches an ASA database type TINYINT.

In the helpfile documentation of the TypeByte! is missing.

Also TypeLongLong! is not described in the helpfile.

the 'Applies To' section in the Connection Reference Manual.

From the online help for BindSPInput, it list the Oracle 10g but is not

listed in the Connection Reference Manaual

ns_timing.cs(39,3): error CS0200: Property or indexer "Sybase.Powerbuilder.PBTiming.Running' cannot be assigned to - readonly

ns_timing.cs(40,3): error CS0200: Property or indexer "Sybase.PowerBuilder.PBTiming.Interval' cannot be assigned to - readonly

and you select the number of copies, the selection does not propagate to

the next print of dw.print(true).

Example #1

dw_1.retrieve(150)

dw_1.print(true,true) // print dialog appears and you select 2 copies. (2 copies of Page 1 of 2 and Page 2 of 2 will print)

dw_1.retrieve(1000)

dw_1.print(true) // no print dialog appears but the 2 copies that were selected from the print dialog from previous print should propagate to this print(). (So 2 copies of Page 1 of 3, Page 2 of 3 and Page 3 of 3

should print. But only 1 copy prints out).

following errors at deployment:

m_ta_main::m_xml::clicked(361) Error C1: Illegal data type: pbdom_builder

m_ta_main::m_xml::clicked(362) Error C1: Illegal data type: pbdom_document

m_ta_main::m_xml::clicked(363) Error C1: Illegal data type: pbdom_element

m_ta_main::m_xml::clicked(364) Error C1: Illegal data type: pbdom_element

m_ta_main::m_xml::clicked(365) Error C1: Illegal data type: pbdom_element

m_ta_main::m_xml::clicked(366) Error C1: Illegal data type: pbdom_attribute

Failed to compile the PB application

ADPlus files included.

RESOLUTION: More info is needed. To find if it is caused by "out of memory".Please run windbg and attatch it to customer's pb100.exe and then run this command to set a condtion breakpoint.

bu pbvm100!fndwDescribe+0xd5 "j @eax = 0x00 '';'g'"

If PB break at this line,it should be a "out of memory" issue and then please run this command to dump all info.

.dump /ma c:\xxx.dmp

For RTE control a workaround can be implemented, but for RTE DW it is not working.

Example:

- Right Alt+a gives a 'small latin letter a with ogonek' and it has erased the whole text

- Right Alt+e gives a 'small latin letter e with ogonek' and it has set the text alignment to right

- Right Alt +l gives a 'small latin letter l with stroke' and it has set the text alignment to left

Same troubles with upper chars while pressing Shift key,

FROM ENGINEERING: sccextensions=0 in the PB.INI file [library] section will make pb only use SccQueryInfo() instead of SccQueryInfoEx() and that made the error messages disappear.

editmask. Problem happens using a editmask of AAAAAAAAAA or !. The cursor is getting placed before the character and replacing the previous character.

There is code in the editchanged event:

dw_1.AcceptText()

dw_1.SetItem(row, 'other_id', (upper(dw_1.GetItemString(row, 'other_id'))))

The root cause is in the expression of the X property of the button in the DW. Seems this expression is too large.

Workaround:

Shrink the expression by using shorter coloumn names.

dw_1.Describe("evaluate('if( junk ,1,0)',1)")

If the expression is not valid, he gets a datawinow messagebox saying something like: "Expecting True/FALSE expression" depending on what's wrong with the expression he is evaluating. But he wants to be able to supress this messagebox and trap the error in a try catch if possible. This is a request for that feature.

If a datastore is used instead of a datawindow then the messagebox is suppressed. But the error is not trappable.

No workaround

Text is wrongly displayed or printed resulting in overlapping text or text

displayed in the wrong rows.

object disappear ( corrupted ) at runtime. After investigation, find that problem seems

caused by multiple calls of menu item function show() or hide().

PB10.5 Menu object may corrupt at runtime, and lead to crash in some condition

eg: For DataDirect OEM 5.1 SQL Server 6.5

PBSS621.DLL

PBSS621R.DLL

PBSS621S.DLL

No workaround

all the spaces for a char field in a datawindow and embedded sql.

Customer would like to see the functionality where it trims the spaces

in the datawindow but leaves the embedded sql as is. Spaces are not trimmed

on columns for embedded sql.

try

do something

catch

messagebox

finally

Return 1

end try

What PB is generating on the C# conversion is

try

do something

catch

messagebox

finally

end try

It's losing the Return 1 statement in the finally block, and then throwing an error on the compile because there's no return value.

no workaround

- to enter a "0" in the field with a mask "##"

- to clear the field if the value is "null" and the mask is "#0"

- to use masks without "." and trailing "0"

- to use the functionality without coding a own function to empty the field.

It is not reasonable for me to code such a function for all editmask fields

and to provide a comfortable way for the end user to use this function.

- to distinguish between "0" and "null"!

Is this an intentional change in behavior? Possibly related to CR 419054 and an intentional change in behavior.

No workaround

are around 500 byte memory fall into "in use" catagory of PB Heap.

In that case all rows were retrieved. When they do the same thing using PB 10, still only 100 rows are retrieved, although 126 reside in the table.

WORKAROUND: In the ODBC DSN, set "Disable rowset size limit" to On (checked)

opened and you click on the Browse cb from the Build Options on the General Tab,

some of the text on the 'Choose Output Path' dialog box is cut off.

Two workarounds:

Adjust OpenLink ODBC DSN setting to allow more than 100 row size, from article ''http://support.openlinksw.com/support/print_opie_article.vsp?OP_ID=1026''

or

Set PB DBParm Block=1 or Block=100

WOrkaround: Set DBParm Block=1

DBCS WinXP ( simplified & Traditional Chinese) and application is using Menu Styple -

"contemporarymenu!".

Also, the search menu option doesn't show up the dialog.

Workaround:

============

When doubleclicking the pbl before performing the search, then the search dialog comes up, and when adding the target, and doing also a doubleclick again on the pbl to be searched, then the search functionality itself is also working correct.

workaround: use new decimal argument type

No workaround

Versions and Build #s Tested: PB 10.2.1_9671

Database/Driver File/Version: ASA 9.0 EASDemoDB10

Comments: When having a JSP 4GL page with a web datawindow, if we configure more than one button to interact with Web DW, only one button works and others will result in following error message:

Jul 13 11:25:45 2006: 060038-Error: Unable to service request for servlet: jspservlet.

Jul 13 11:25:45 2006: 060039-Error: ServletException contained the following root cause exception:

java.lang.ClassCastException

This issue prevents having more than one button to interact with WebDW.

Workaround : activate "Slide Left" option for computed field

MaskDataType available is mm/dd/yyyy. You cannot use a single month or day as part

of the mask

RESOLUTION: Editmask of 'm/d/yyyy' is not supported but the display format of 'm/d/yyyy'

is supported.

With PB 9.0.3 and VS 2003 the error is System.NullReferenceException: Object reference not set to an instance of an object.

With PB 10.5 and VS 2005 the error is a SystemAccessViolationException and the message test is Attempted to read or write protected memory. This is often an indication that other memory is corrupt.

Workaround is to post an event from the Open event, and in the posted event make the call to Open(w_Response_Window).

We often call this the "ue_postopen" event concept...

This problem happens when the display is set to "Windows XP" as a Theme in the control panel on your PC.

generation/compilation.

For example, pb allows to put a return statement in a finally portion of a

try..catch but the syntax warning is being issued at the c# generation/compilation.

PB should be scanning code and catching this before the c# compilation/generation.

Example, dw_1.object.datawindow.print.paper.source does not use consistent

values and the printer must be queried in order to obtain the correct values.

Previously all developers had sysadmin privileges in the db. Then they were changed to db_owner role instead of sysadmin. This causes a change in the syntax for dws, etc: when sysadmin, table names are not qualified, eg: employee, but when db_owner and not sysadmin, table names are qualified eg: dbo.employee. Looking through the MS SQL Server Enterprise Manager help, I think this is correct behavior, but you can see how this might cause problems for an engineering team. A similar problem can exist using ODBC but adding the PBTableOwner option in the PBODBxx.INI file can work around that. Customer would like a similar option for OLEDB.

FROM ENGINEERING: The current behavior for SQLOLEDB is correct and it is not possible to implement PBTableOwner for a workaround. However, this problem can be solved by the customer by moving to SQL Server 2005. In SQL Server 2005, schemas exist independently of the database user that creates them. Ownership of schemas can be transferred without changing their names.

1) Will PB be supporting DIME attachments for Web Services? In what version of PB will this happen, PB 11?

2) Is there a workaround for current versions of PB that will enable them to access/download the DIME attachments.

name pair as already exists in EAServer. Their primary intention is to not to recompile the C++ client by maintaining the same Package/component combination.

This works in PB 9.0.3 and it also works in PB 10.2 build 8116 with the DisableUnicode=1 dbparm. However in the latest builds of 10.2.1 this no longer works getting the string buffer is too small error. The same failure occurs in PB 10.5. Sett the stored procedure variable declaration to char(13), then and all the PB versions will work. So it needs (2 * 6) + 1 for the buffer to accept the 6 character string which seems like it could be a unicode related issue.

Calling the same procedure from SQLPus and passing a 6 character string to a char(6) variable works.

WORKAROUND: Compile the EXE with P-Code instead of machine code.

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PB 10.2.1_9671

Database/Driver File/Version: N/A

Comments:

PSR Document name gets truncated in Printer spooler window.

Printed a report with long printer name (over 31 Characters). When they close the report window Application crashes. We have used the PB Build.

HKLM\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Uninstall\\{F44EAEB2-332B-48B9-B1B7-E25EAB628124}

We cannot control the behavior of the SCC vendor when it writes files from the SCC repository to the local project path. These operations include: "Check Out", Undo Checkout", "Get Latest Version", and "Remove from Source Control". Some SCC vendors provide a configuration setting on their "Source Control, Advanced Options..." dialog that provides functionality similar to our "Supress prompts..." property. Others do not. PBNative silently overwrites read-only files on the local project path. That's why you didn't see the prompt on a check-out operation. You should see the prompt if you chose one of the other SCC operations where the PB IDE attempts to export code from the PBL to the local project path.

of a dynamically created datawindow (SyntaxFromSQL).

With an Oracle 9 client there could be an ORA-00932 error.

-----------------------

OS: Windows 2000 SP4

Versions and Build #s Tested: PB 10.2.1_9597

Database/Driver File/Version: SYC with Open Client 12.5.1 EBF11786 and ASE 12.5.3

Comments:

After many connections and disconnections to ASE 12.5.3 by using OCS 12.5.1 and SYC interface, customer receives the error:

(2300008): *** ERROR 999 ***(rc -1) : Unable to initialize Client Library Context.

Versions and Build #s Tested: PocketBuilder 2.0.4 Build 940

Database/Driver File/Version: N/A

Comments:

When issuing a PostURL, the arguments are not retrieved from web page. If testing same page from outside PocketBuilder, it works.

that can contain hints for the Oracle optimizer are being stripped.

No workaround

show up for the shared libraries.

When running the following command (for build 9671), the build number is not listed:

strings libpbvm100x.so | grep Version

The following is returned:

Version10.2.0.4521

Version: %s

getVersion

CtsSecurity::X509Certificate::getVersion -- unknown user exception '%.100s'

PBX_GetVersion

_PBX_GetVersion@0

DllGetVersion

DllGetVersion

Version10.2.0.4521

Version 10.0.1 5502

at runtime and add a toolbaritemname and then enable it and set visible to true, the toolbar picture does not appear.

If at design time the ToolBarItemName has a value (even a couple of spaces), then when you modified ToolBaritemName at runtime, the picture will appear ok on the toolbar.

and then you reference one of the string array elements will cause the following error:

Registers:

EAX:00000000

EBX:00000001

ECX:FFFFFFFF

EDX:0295A7A4

ESI:00000061

EDI:00000061

CS:EIP:001B:10C5D4ED

SS:ESP:0023:0012E398 EBP:0012E4C0

DS:0023 ES:0023 FS:003B GS:0000

Flags:00010246

Call stack:

Address Frame Param0 Param1 Param2 Param3 Function Name

10C5D4ED 0012E39C 0295A94C 00000061 0295A7A4 0295A94C obFreeDebug+33D

10DC2F6B 0012E3B0 0295A94C 0296AE74 0295A94C 0012E3D8 PbHeap_traceOff+A45B

10CF11B9 0012E4C0 0295A94C 0296A13E 0296ADE4 00000032 rt_set_pcode_to_line+789

10CEEB7D 0012E4F8 80190002 02967014 00000000 00000000 rtRoutineExec+165D

10CED896 0012E568 02967014 00000019 02967590 00000000 rtRoutineExec+376

10C4D6EB 0012E628 0295A94C 02967590 000003E9 003E06BC fn_txnservice_create_instance+6B1B

10C4C419 0012E654 0295A94C 02967590 000003E9 003E06BC fn_txnservice_create_instance+5849

10C4B31B 0012E788 004E075A 00000111 000003E9 003E06BC fn_txnservice_create_instance+474B

10BDDBCC 0012E8F8 004E075A 00000111 000003E9 003E06BC FN_WindowWnd+B4C

77D48734 0012E97C 77D48830 00000000 0012E9BC 77D4C63F GetDC+6D

77D70467 0012EA88 77D48830 00000000 0012EAD4 77D4B89B DeregisterShellHookWindow+1CF

77D70467 0012EC50 77D48830 00000000 0012EC90 77D4C63F DeregisterShellHookWindow+1CF

77D70467 0012ED98 77D48830 00000000 0012EDD8 77D4C63F DeregisterShellHookWindow+1CF

77D70467 0012EF10 77D48830 00000000 0012EF80 77D489CD DeregisterShellHookWindow+1CF

77D70467 0012EF70 77D489F0 FFFFFFFF 0012EF90 77D496C7 DeregisterShellHookWindow+1CF

77D70467 0012F028 10DDAB00 FFFFFFFF 0295A94C 10C6E460 DeregisterShellHookWindow+1CF

10DB8D08 0012FDE4 77D48830 00000000 0012FE54 77D489CD PbHeap_traceOff+1F8

77D70467 0012FE44 77D489F0 FFFFFFFF 0012FE64 77D496C7 DeregisterShellHookWindow+1CF

77D70467 0012FFB0 10006198 00000000 0012FFF0 7C816D4F DeregisterShellHookWindow+1CF

10002800 0012FFE0 7C816D58 00000000 00000000 00000000 0001:00001800 C:\pb\pb9\Shared\PowerBuilder\PBCR90.EXE

7C8399F3 FFFFFFFF 00000000 00000000 00000000 00000000 FindAtomW+94

> 255 chars (either data or display value), PowerBuilder will crash on SetFullState or GetValue.

Versions and Build #s Tested: PB 10.2.1_9671

Database/Driver File/Version: SYC ASE 12.5.3

Comments: When inserting a new row in datawindow and typing a value into the 1st column that is a dropdown datawindow, PowerBuilder GPFs.

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PB 10.2.1_9671

Database/Driver File/Version: SYC ASE 12.5.3

Comments: When tabbing to 1st column of row, which is a dddw, the dddw incorrectly displays the same value as previous row.

items of New Insert row only contain null value. Cust. reported that start from

Powerbuilder 10.2.1 build 9671, the dropdown datawindow of New Insert row has the edit

control holding up previous data value, which is the value of the last focus dropdown datawindow control.

The data is not found.

Using a stored procedure having output parameter

RESOLUTION: Using the OCI9_U or OCI10_U resolved the problem.

a.) if short as a ANSI formatted BLOB

b.) if longer than as a UNICODE formatted BLOB.

that also started new try catch blocks.

Compiler returns "C0001: illegal data type: d`window" then PB crashes down.

The reason for this is that DB Profiles are saved as INI files on export. An INI file is read using sections delimited by brackets. Using brackets in the DB Profile name "confuses" the function used to do the import, and the import fails.

Per Engineering: According to MSDN, a section in an INF file begins with the section name enclosed in brackets ([ ]).

The section name "demo [myname]" in the customer's db profile will cause Windows API GetPrivateProfileString() fails to get the section's field.

when you build a datawindow where there are 2 tables with 2 different owners

and the extended attributes are applied to the database columns.

There are 2 display formats created:

Mark = [RED]@@@@@@@@@@@@@@

Mike = [BLUE]@@@@@@@@@@@@@@

There are 2 tables:

"OWNER1"."CUSTOMER" (Col_2 and Col_3 have Mike's display format)

"OWNER2"."CUSTOMER" (Col_2 and Col_3 have Mark's display format)

When you connect to the db (under owner2) and create a datawindow, the extended

attributes are not getting applied properly.

(1.05d or 1.05D), causes incorrect calculations to occur. It appears the decimal point is completely ignored, so in the case of 1.05, the value used is actually 105.

calling Stored Procedure, will result in a ora-03106: Fatal two task communication protocol error.

No error when using space(XX):

string ls_test1, ls_test2

ls_test1 = space(50)

ls_test2 = space(50)

lds_sp = Create n_datastore

lds_sp.DataObject = 'd_sp'

lds_sp.SetTransObject(SQLCA)

ll_rc = lds_sp.Retrieve(li_test, ls_test1, ls_test2,'c','d', 'e',1)

You have to manually activate the SIP (once) to make it work. After the SIP has been manually activated once, it then works as expected.

Introduced the new runtime properties:

SIPOnFocusUp_AlternateTechnique

SIPOnFocusDown_AlternateTechnique

database blob using ADO.NET (System.Data.OleDB), the following error results:

Select Error: Index #0 Message: Login failed for user ''.NativeError 18456 Source: Microsoft OLE DB Provider for SQL Server SQLState: 42000

Versions and Build #s Tested: PB 10.5_5063, 10.5_5048

Database/Driver File/Version: EAS Demo DB V105

When migrating RichText Datawindow from PB 10.2.1 to 10.5, the column fields are converted to simple plain text. For instance, field {AU_LNAME} that is understood as a column in RichText DW in 10.2.1 is now just a plain text in 10.5.

A second issue is the argument theTime is declared but not used. This is not a huge problem, but it's not clean code and if you look at the 'sister' methods of DW_DateToString and DW_DateTimeToString, neither have arguments.

Versions and Build #s Tested: PB 10.5_5063

Database/Driver File/Version: ASA 9.0 EASDemoDB105

Comments: In dw graph, during runtime, today there's no need to add vertical scroll into dw control when dw object is DW Graph. As customer uses many graph objects on same dw object, he'd like to be able to enable a vertical scroll bar so that he can scroll into the multiple graphs inside dw graph object.

when the toolbar is in the 'Float' position.

When a custom event is mapped to the pbm_move and you have the following script:

integer li_xpos

integer li_ypos

string ls_microhelp

li_xpos = this.x

li_ypos = this.y

ls_microhelp = " window.x: " + String ( li_xpos ) + " window.y" + String ( li_ypos )

this.Setmicrohelp( ls_microhelp )

Once you change the MDI Toolbar to 'Float' and Show Text is enabled, the this.x

and this.Y are not getting updated.

Versions and Build #s Tested: PB 10.5_5063

Database/Driver File/Version: ASA 9.0 EASDemoDB105

Comments: In dw graph, during runtime, today there's no need to add vertical scroll into dw control when dw object is DW Graph. As customer uses many graph objects on same dw object, he'd like to be able to enable a vertical scroll bar so that he can scroll into the multiple graphs inside dw graph object.

Error Type:

Server object, ASP 0177 (0x800401F3)

Invalid class string

/TryWebDW/test1.asp, line 8

keyboard Tab Key will place the edit focus correctly. However it is observed that "Tab" and "Shift + Tab" incorrectly place the focus.

Workaround: do first the modification and then do a create before printing. With nested reprot use LibraryImport function to import the modifed report with only one page size.

jsp editor will save the tags as upper case.

The html tags changing to uppercase are:

Before:

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">

<head>

<title>DevGuru XHTML label Tag Example</title>

</head>

<body>

<form>

<fieldset>

<legend>Please Enter Your Name</legend>

<label for="firstname">First Name</label><input type="text" id="firstname" />

<br />

<label for="lastname">Last Name</label><input type="text" id="lastname" />

</fieldset>

</form>

</body>

</html>

After:

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<HTML xmlns="http://www.w3.orgߏ/xhtml" xml:lang="en" lang="en">

<HEAD>

<TITLE>DevGuru XHTML label Tag Example</TITLE>

</HEAD>

<BODY>

<FORM>

<FIELDSET>

<LEGEND>Please Enter Your Name</LEGEND>

<LABEL for="firstname">First Name</LABEL>

<INPUT type="text" id="firstname"/> <BR/>

<LABEL for="lastname">Last Name</LABEL>

<INPUT type="text" id="lastname"/>

</FIELDSET>

</FORM>

</BODY>

</HTML>

Versions and Build #s Tested: PB 10.2.1_9671 and EAServer 5.2

Database/Driver File/Version: ASE 12.5.1

Comments:

When inserting two rows in datawindow, when updating it via GetChanges/SetChanges, one of the rows is saved and the other not, within the same transaction.

In 2-tier (client-server) architecture, both rows are not save within the same transaction instead.

We need to know if the behavior in 3-tier is normal (because of the dw modify flags) or really an issue, when compared to 2-tier architecture behavior when saving the rows into ASE table.

Customer states that the crashing is happening when the printer name is greater than 63 characters. CR 402992 fixed a problem related to long printer names on Citrix with the note that the fix should enable PowerBuilder to handle printer names up to 220 characters.

Winform and Webforms gives you this erros if deploy projects. Works fine if deploying as PB exe.

webform is deployed to IIS. The Login.aspx references it as follows:

<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="_Default" %>

a multinewspaper column group datawindow, any data beyond the first page is blank.

Using 3 newspaper columns and 1 group.

Issue 1:

This is a regression. In PB 10.2.1 with the WordWrap property checked on a RichText control, when entering text it wraps properly. But in PB 10.5 it does not wrap as it should.

Issue 2:

This fails in both PB 10.2.1 and PB 10.5. Again the Richtext control has the WordWrap property checked. But when you use the PasteRTF function to paste in some text, that text does not wrap.

the output path for the 'Build Options' is the directory where the pbls, resource objects are located, once you deploy the project all

pbls, files, etc are deleted.

When you create a new winform target and project, the output path

for the Build Options is the name of the project + WinformOutput. But if

you select to change the output path, the new output path will not contain

_WinFormOutput.

appears:

Error Summary:

n_cst_find_output_datawindow::n_cst_find_output_datawindow::of_match(94) Error C109: Private or protected function cannot be accessed: of_remove

n_cst_find_output_dbcolusagerpt::n_cst_find_output_dbcolusagerpt::of_match(70) Error C109: Private or protected function cannot be accessed: of_remove

n_cst_find_output_richtext::n_cst_find_output_richtext::of_match(299) Error C109: Private or protected function cannot be accessed: of_remove

Failed to compile the PB application

The of_match references:

n_cst_list lnv_contextlist

lnv_contextlist.of_remove(lnv_Context2)

The n_cst_list/of_remove is public and is inherited from

pfc_n_cst_list/of_remove is also public. Pfc_n_cst_list is inherited from

n_cst_linkedlistbase/of_remove is protected. N_cst_linkedlistbase is inherited from

pfc_cst_linkedlistbase/of_remove and is protected.

field. This error occurs when selecting a Hijri date through the SYC interface.

ASE date/time type is an ASE1251 new feature.

Therefor the appropriate client must be installed dbparm ''Release='12.5.1'''

or higher must be set for this feature to work.

results:

error CS0117: Sybase.Powerbuilder.PBAny does not contain a definition for Session

painter is not working for ActiveX (Ole) controls.

Problems/Changes in Behavior:

1) When filling the form it goes to 2 pages.

2) After printing the data disappears.

Customer is aware that the PB 10.5 control is a new control but this behavior did not happen in PB 10.2.1.

This CR is a request to remove the blob size limit on RPC calls.

PER ENGINEERING: This is a known limitation because PB does not have the information it needs to marshall/unmarshall the data. The message is accessible by java because java handles marshall/unmarshall differently and in this case the information is known for java. For PowerBuilder, the workaround suggested for the customer would be to change their code and put this text message to a public field of MyException, instead of put it to the private field of his ancestor.

menu 'checked' or menuimage property correctly. The backcolor is not correct.

Also the MenuTitleText is getting cut off.

observable memory leakage. As customer's PB10.2.1 application need to call the function

frequently, the PB application eventaully will be crash when "Virtual Byte" climb up to

around 230MB.

Database side as the source of query statement. PB document also mentions that PB Datawindow

Wizard allow to select EAServer's components that return TDS stream to be source. However,

in Powerbuilder 9.0.3, 10.2.1 and 10.5, the datawindow wizard only show empty wizard.

return correct values for the page function.

and then you either retrieve or return to the dw painter from the datasource, the

following error results:

ora-01742: comment not terminated properly

Using the following sql:

SELECT "EMP"."EMPNO",

"EMP"."ENAME", /*---- Test ---- */

"EMP"."JOB",

"EMP"."MGR",

"EMP"."HIREDATE",

"EMP"."SAL",

"EMP"."COMM",

"EMP"."DEPTNO",

"EMP"."DESCRIPTION"

/*---- More Testing ----*/

FROM "EMP"

From the pbtrace.log, it doesn't appear that the ending comment '*/' is getting

picked up:

SELECT "EMP"."EMPNO", "EMP"."ENAME", /* "EMP"."JOB", "EMP"."MGR", "EMP"."HIREDATE", "EMP"."SAL", "EMP"."COMM", "EMP"."DEPTNO", "EMP"."DESCRIPTION" /* FROM "EMP"

populate a dw column of type decimal.

Using:

w_Detail.object.Labor_Charge[ll_Detail_row] = sc_Labor_Charge[il_index]

dw_Detail.object.Materials_Charge[ll_Detail_row] = sc_Materials_Charge[il_index]

Where Labor_Charge and Materials_Charge are of type decimal.

When using the Profiler, the following routines have the highest performance times:

dwobject.__set_attribute_item()

datawindow.insertrow()

"Warning: A full or incremental rebuild should be performed.

The following object(s) may not be usable in their present state."

Full Rebuild may lead to a crash.

The issue is also in PowerBuilder 10.5

http://www.microsoft.com/technet/windowsvista/security/uacppr.mspx#EJH

occur on the surface of the button. Also when specify Ampsand "&" with Button

label, the first right character(e.g. &Save) stick with the Ampsand will has an underline

to remind user that the Button can be access by hot key (e.g. Alt + S).

It is reported that after PB10.2.1 build 9726, the PB runtime does not show the "Dotted

line rectangle" and the Hot Key underline indicator.

that contains a comma, once you tab out of the column

the value changes.

Enter: 10,000.

Resulting value once you tab out: $10.00

if your executable file is generated in machine code.

Workaround is to set the x and y values in script instead of using the Move function.

an editmask on a dw column, you cannot spin to min value.

Using editmask of ###% with min value of 20. If you enter in a number, such

as 23, and then use the down arrow, it will stop at 21 instead of the min value of 20.

validation is firing incorrectly.

The dw column is defined as char(9) and has a validation defined in the

datawindow as: len(gettext()) < 10

The column has a display format defined as: @@@@@-@@@@

When entering the last portion of the zip code and tabbing out of the column

causes the validation error to fire.

/DebugOutFile=<filename>

Similar to CR 440797.

results:

error CS0030: Cannot convert type 'Sybase.PowerBuilder.Win.PBStaticText' to 'int'

error CS0030: Cannot convert type 'int' to 'Sybase.PowerBuilder.Win.PBStaticText'

Application contains structure object with array of "static text" controls.

Setting up IE Web Controls on the server.

In the 'Required Software' section of the Install.txt for PB 11 Beta 2:

PowerBuilder .NET Web Forms use Internet Explorer Web Controls to

display correctly and to provide functionality for the Tab, TreeView,

and Toolbar controls. You can install IE Web Controls (version 1.0)

from the Support_PB.zip file. Install the files into a temporary

directory and follow the instructions in the readme.txt file that

displays to build and run the controls.

Customer believes that IE Web Controls [and .NET 2.0] need to be installed before PB

is installed. If that is a prerequisite, it should be documented.

RESOLUTION: IE Web controls can be installed after PB11 is intalled.

Len() with the string data returns -1 in the function.

When a DataWindow retrieve includes an array retrieval argument

then all retrieval arguments are no longer binded.

p-code exe.

If the selectedtab property is set to other than 1 then the sheet opens fine.

First Issue: Behavior if you programatically set dates in an editmask. If you programatically set dates in an em nothing happens. But once an em with a changed date first gets focus and loses focus then the modified event fires. This could be much later than when the date was set.. If the em has a date set and it then happens to have focus, the modified event fires as soon as it loses focus even though you have done nothing to it right then. Would not it make more sense for the modified event to fire when the date was set programatically, and not wait for the em to first gain and then lose focus?

Second Issue: Behavior of editmasks with a dropdown calendar. If you do not have focus on an em with a dropdown calendar and you click to drop down the calendar you can change the date and no modified event fires. If you then click off of it, then the modified event fires. But if the editmask has focus to begin with and you drop down the calendar and change the date, the modified event fires right then. This seems to be the best behavior. Shouldn't it do the same thing even if it does not have focus to begin with?

in a richtextedit control when using insertdocument.

Using:

rtn = rte_1.InsertDocument("Choices Exempt -TXK.rtf", TRUE, FileTypeRichText!)

Part of the header is missing and all footer is missing.

result:

pfc_n_cst_dssrv.of_getitemany(ALSCdwbuffer.B)(44,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAny' because it is a value type

pfc_n_cst_dssrv_report.of_addpicture(SSSIICborder.B)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.LLB)(54,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.LLB)(54,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addline(SSClinestyle.IIIIILLB)(48,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.LL)(52,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.)(50,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSIICborder.BBB)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSII)(40,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addline(SSClinestyle.IIIIILL)(46,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dssrv_report.of_addcompute(SSSIICborder.)(43,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addline(SSClinestyle.IIIII)(44,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dssrv_report.of_addpicture(SSSIICborder.)(44,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addpicture(SSSII)(41,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.LL)(52,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.)(50,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSIICborder.BBB)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSIICborder.)(43,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dssrv_report.of_addtext(SSSII)(40,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

n_cst_dwcsrv.of_getitemany(ALSCdwbuffer.B)(63,16): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAny' because it is a value type

pfc_n_cst_dwsrv.of_getitemany(ALSCdwbuffer.B)(44,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAny' because it is a value type

pfc_n_cst_dwsrv_find.of_replace(ILSS)(200,3): warning CS0162: Unreachable code detected

pfc_n_cst_dwsrv_report.of_addpicture(SSSIICborder.B)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.LLB)(54,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.LLB)(54,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addline(SSClinestyle.IIIIILLB)(48,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.LL)(52,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSIICborder.BBBSICfontcharset.)(50,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSIICborder.BBB)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSII)(40,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addline(SSClinestyle.IIIIILL)(46,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addcompute(SSSIICborder.)(43,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addline(SSClinestyle.IIIII)(44,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBVTextAlignValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addpicture(SSSIICborder.)(44,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addpicture(SSSII)(41,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.LL)(52,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSIICborder.BBBSICfontcharset.)(50,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSIICborder.BBB)(46,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSIICborder.)(43,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

pfc_n_cst_dwsrv_report.of_addtext(SSSII)(40,14): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBAlignmentValue' because it is a value type

n_cst_objecttype.of_getlibdirfromorca(Clibdirtype.S)(28,15): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBLibDirTypeValue' because it is a value type

n_cst_platformunicode.of_registrytype(Cregistryvaluetype.SS)(6,18): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBRegistryValueTypeValue' because it is a value type

n_cst_platformunicode.of_registryvaluetypes(ISRS[]RCregistryvaluetype.[])(13,13): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBRegistryValueTypeValue' because it is a value type

n_cst_platformwin32.of_registrytype(Cregistryvaluetype.SS)(6,18): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBRegistryValueTypeValue' because it is a value type

n_cst_platformwin32.of_registryvaluetypes(ISRS[]RCregistryvaluetype.[])(13,13): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBRegistryValueTypeValue' because it is a value type

n_cst_processor_datawindow.of_validatesql(BCn_cst_object_datawindow.RS)(14,3): warning CS1717: Assignment made to same variable; did you mean to assign something else?

n_cst_processor_searchandreplace.of_replaceinscript(BRSSSBBBB)(31,3): warning CS1717: Assignment made to same variable; did you mean to assign something else?

n_cst_processor_searchandreplace.of_replaceinsql(BRSSSBBBB)(31,3): warning CS1717: Assignment made to same variable; did you mean to assign something else?

pfc_n_cst_tvsrv_levelsource.of_register(IISSCdatawindow.S)(10,40): warning CS0219: The variable 'ldw_control' is assigned but its value is never used

pfc_n_cst_tvsrv_levelsource.of_register(IISSCdatastore.S)(11,35): warning CS0219: The variable 'lds_control' is assigned but its value is never used

pfc_n_cst_tvsrv_levelsource.of_registerdatasource(IISSCn_tr.SCpowerobject.[]Cdatawindow.Cdatastore.S)(140,3): warning CS0162: Unreachable code detected

pfc_n_cst_winsrv_sheetmanager.pfc_undoarrange(41,16): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBArrangeTypesValue' because it is a value type

pfc_n_cst_winsrv_sheetmanager.constructor(1,16): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBArrangeTypesValue' because it is a value type

pfc_u_lvs.pfc_insertitem(60,3): warning CS0162: Unreachable code detected

pfc_u_progressbar.of_setfontbold(SB)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontbold(SB)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontitalic(SB)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontitalic(SB)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontunderline(SB)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontunderline(SB)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontface(SS)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontface(SS)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontfamily(SCfontfamily.)(41,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontfamily(SCfontfamily.)(42,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontpitch(SCfontpitch.)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontpitch(SCfontpitch.)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontsize(SI)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontsize(SI)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

pfc_u_progressbar.of_setfontcharset(SI)(40,20): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontFamilyValue' because it is a value type

pfc_u_progressbar.of_setfontcharset(SI)(41,19): error CS0037: Cannot convert null to 'Sybase.PowerBuilder.PBFontPitchValue' because it is a value type

It does not happen on device where Win 4.xx is installed

the regional settings are set to French (Belgium), the following error results:

w_test(17,3): error CS1501: No overload for method 'PBVariableAttribute' takes '5' arguments

bin\Sybase.PowerBuilder.Core.dll: (Location of symbol related to previous error)

local variables are not displaying in the debugger.

* BarcodeScannerSample from CodeXChange

* Barcode_MK2 from the code samples with PocketBuilder 2.0

* scannerppt8800 from CodeXChange

Problem is with the interaction with the barcode scanner and InfraRed beam drivers.

To fix:

a) goto Settings -> Connections -> Beam

b) turn off "Receiving incoming beams" (this is the InfraRed data comm stuff)

c) soft boot the device

You may have to repeat the process once because of the way WinCE works, but after the second reboot it all should be configured.

Versions and Build #s Tested: PB 9.0.3_8716, 10.5_5063

In runtime, DECLARE...EXECUTE of a store procedure from a different database than declared in SQLCA.Database and using output variable produces the following error message in execution:

"Can't use the OUTPUT option when passing a constant to a stored procedure."

If same PBScript code is execute when SQLCA.Database declared to same database where stored procedure is located, then execution goes fine.

MessageBox("Results", "As double: " + String(double(35878.378302)/double(45878.378302)) + "~r~nAs decimal: " + String(35878.378302/45878.378302))

this.DataObject = 'd_test'

Customer claims he used this same code in PB 7 and it did not crash. Datawindows with less columns are assigned without a crash.

from the .msi created with the Runtime Packager and then you want to update

to a different version, you are unable to do so.

When you run the .msi with the updated runtime files, the installer ask

to Repair or Remove. If you select, Repair than it looks like the files are

getting copied. But there not.

The Runtime Packager generates the.msi file and the msi file follows the rules of the

windows installer.

The RuntimePackager doesn't appear to have the ability to do either:

Patching or Upgrading

Per Engineering: The style of a lowered border is ''flat'', not 3d in Windows XP. If you set Control Panel to use Windows Classic (or set PB Option to use Windows Classic), then the style will have a 3d effect. The Lowered! style still has a visual effect, but it is flat (and differs from Box Style)

debugging a winform/webform application.

Using the following code:

string ls_test

ls_test = "Hello"

f_test_func(gl_test,2,ls_test)

ls_test = "Complete"

When clicking on the "Step In', once the debugger hits the f_test_func, it will just

go to the next line of ls_test = "Complete" instead of stepping into the f_test_func

code.

If you place a breakpoint in the f_test_func, than the debugger will step into

the f_test_func ok for a winform app. This is different behavior then with a

regular app where if you place a breakpoint at the f_test_func and step in, it

will step into the code of f_test_func. This is the behavior in PB 9.0.3,10.2.1,

10.5 and 11.

dw_2.SaveAs("",Excel8!,True)

Then the SaveAs dialog will display with the Encoding field enabled and selected with ANSI/DBCS. Users are left confused wondering which option they should select for encoding. In actuality - they are saving a file of type Excel - such that encoding is not relevant and should be disabled so as to prevent user confusion. If the user changes the TYPE from Excel to something else and back to Excel - then the encoding field is properly disabled. This field should be INITIALLY disabled if the dialog opens with the type set to Excel (and also of course the other types for which encoding is not relevant).

The crashhandler output and crash dump suggests this to be at run of ob_run_garbage_collection+142

Database/Driver File/Version: SYC with Open Client 12.5.1 EBF 13692 ESD#15 and ASE 12.5.3

Comments:

After many connections and disconnections to ASE 12.5.3 by using OCS 12.5.1 and SYC interface, customer receives the error:

(b20008): LOGIN:

(b20008): CLI 5 #4 ct_connect(): network packet layer: internal net library error: Net-Lib protocol driver call to connect two endpoints

failed (0.010 MS / 0.010 MS) (1.676 MS / 1.686 MS)

(b20008): *** ERROR 4 ***(rc -1) : ct_connect(): network packet layer: internal net library error: Net-Lib protocol driver call to connect

two endpoints failed

Another variation of this same error in customer environment is that sometimes he also receives the following error message:

2300008): *** ERROR 999 ***(rc -1) : Unable to initialize Client Library Context.

Quickly scrolling a Retrieve as Needed Grouped DataWindow with the Mouse

can give white space displayed within the datawindow.

Work-around:

Add a "this.setredraw(true)" statement in the scrollvertical and retrieveend events.

When opening PSR files created in older PB 8 Builds, PB 10 gives the error:

DataWindow syntax has incorrect release number.

MASP call on generateresultset gives incorrect precision and scale error

and EAServer crash

And, the following conditions are required for this problem.

1) The two computation fields are located in the DataWindow used as DDDW.

1st field is "compute_1", 2nd field is "compute_2".

2) Set "compute_1" to [Data Column] property of which defined the DDDW.

* [Data Column] property needs to specify the 1st field.

3) Set "compute_2" to [Display Column] property of which defined the DDDW.

* [Display Column] property needs to specify the 2nd field.

4) Excute Modify() to the DropDown DataWindow as an edit style.

Ex.) dw_1.Modify("aa.background.color=255")

in a datawindow and then re-retrieve.

PB crashes with an access violation in the pbvmxx.dll and a callstack of:

Call stack:

Address Frame Param0 Param1 Param2 Param3 Function Name

115050B6 00000548 00000000 00000000 00000000 00000000 PBROI_ControlGetBinary+36

to PBVM 10.5 and EAS5.3 (before is PB8.0.4 and EAS4.2.2). The problem only happened on the

first loading of a PBVM / PB Component. It is caused by one of the PB Component Calls from

a HTML Frame which has divided the into 3-4 JSP pages and each page make a PB component call.

Modify the stacksize of Jaguar Server, can make this CR work.

Can't reproduce this CR now. Need help from PB engineer.

*** Tuesday, Oct 31, 2006 17:09:37 *** ***

Reproduced.

A workround can let this CR work.

PER ENGINEERING: This is a limitation of web form application, on web form truncating and wrapping texts depend on the word-wrap attribute behavior of Internet Explorer. Documentation was added to the section "Modified display of visual items and controls" to the source documentation (Deploying Applications and Components to .NET book). It includes a table with the following entry on one of the table lines:

Table Column Heading Table Value

Visual component or control: StaticText

Behavior in Web Forms applications: Text is truncated to fit the size of the

control, even if that is in the middle of

a word.

Data is missing when calling a WebService method that takes a class as an argument having complex datastructures.

What it's sending is: SELECT owner, object_name FROM sys.all_objects WHERE status = 'VALID' AND (object_type = 'PROCEDURE' OR object_type = 'FUNCTION') UNION SELECT DISTINCT owner, package_name || '.' || object_name FROM sys.all_arguments WHERE owner <> 'SYS' AND package_name IS NOT NULL AND object_id IN (SELECT object_id FROM sys.all_objects WHERE object_type = 'PACKAGE' AND owner <> 'SYS') AND data_type = 'REF CURSOR'

As a result, it's returning all of the stand alone procedures and functions, whether they have a REF CURSOR argument or not.

What it should be using is something more along the lines of:

SELECT owner, case when package_name is null then object_name else package_name || '.' || object_name end FROM sys.all_arguments WHERE owner <> 'SYS' AND data_type = 'REF CURSOR' AND object_id IN ( SELECT object_id FROM sys.all_objects WHERE owner = sys.all_arguments.owner AND object_type in ( 'PACKAGE', 'PROCEDURE', 'FUNCTION' ) ) ;

Then when you want to see system procedures as well you only have to remove the one "owner <> 'SYS' AND' rather than two of them...

set3f.tmp - Application Error

The instruction at "0x773e0d8d" referenced memory at "0x773e0d8d".

The memory could not be "read"

Click on OK to terminate the program.

Installed only PowerBuilder and Infomaker.

Application object opens an mdi frame with a logon window. Clicked event of OK button on logon window should open an mdi sheet. It does running normal PB app, but not when running as winform.

using the HP odbc driver. Retrieving a datawindow just using dw_1.retrieve().

ConnectString='DSN=HP ODBC 1.0;Schema=DEV;DisableBind=1;Block=1;Request=1;UID=trundo;PWD=trundo'

AULTING_IP:

ntdll!RtlAllocateHeap+567

7c9111de 8b10 mov edx,[eax]

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 7c9111de (ntdll!RtlAllocateHeap+0x00000567)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 2e202020

Attempt to read from address 2e202020

DEFAULT_BUCKET_ID: APPLICATION_FAULT

PROCESS_NAME: iq.exe

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

READ_ADDRESS: 2e202020

BUGCHECK_STR: ACCESS_VIOLATION

THREAD_ATTRIBUTES:

LAST_CONTROL_TRANSFER: from 77c2c3c9 to 7c9111de

STACK_TEXT:

019efe38 77c2c3c9 00540000 00000000 00000020 ntdll!RtlAllocateHeap+0x567

019efe78 77c2c3e7 00000020 019efe94 77c29cd4 msvcrt!_heap_alloc+0xe0

019efe84 77c29cd4 00000020 00000001 019eff1c msvcrt!_nh_malloc+0x13

019efe94 04c13e5f 00000020 015c4fc4 015c4f50 msvcrt!operator new+0xf

WARNING: Stack unwind information not available. Following frames may be wrong.

019eff1c 77c2e556 00547130 0054f418 7c90ee18 hp_odbc0100!Ordinal999+0x13e5f

019eff34 7c91056d 00000000 00000000 00000000 msvcrt!_unlock_fhandle+0x25

ffffffff 00000000 00000000 00000000 00000000 ntdll!RtlFreeHeap+0x647

RESOLUTION: Not a PB bug.

After removing all the log related code in this CR, find COLUMN CHECK ERROR, which cause EAServer crashed.

Seems a pbvm issue. Need pbvm debug first. Thanks.

*** Tuesday, Oct 31, 2006 17:54:54 ***

Reproducing this CR.

Proved that its root cause is pbjdbc.jar in pbvm is incomplete.

*** Monday, Nov 06, 2006 13:37:51 *** ***

Reproduced.

Confirmed that pbjdbc.jar has relation with the CR. Wait for some fixes of pbvm team.

*** Friday, Nov 03, 2006 18:27:22 *** ***

Reproducing.

A DataWindow crashes in the PBSQL90.DLL when trying to enter the DataSource

The SQL statement is a join on several tables and contains a subselect in the where clause

ic_mci_return is defined as char [256].

Problem happens when app is deployed as winform. Works ok running as normal

app.

paste the conditional Preprocessor commands using the RHMB, they are gray

out. However, you can paste them into the Script Pane and then copy them to

the target "Variable" section, save & compile. The pasting of the

Preprocessor commands should be allowed in the "Variables" section of the

Script Painter!

event.

Problem appears to be in the wn_cd_player_ae/timer().

then saved as a rtf file are saved to a wmf format.

When you open a rtf file with a picture inserted, the following is the format:

\pict\wmetafile8\picw3175\pich1164\picwgoal1800\pichgoal660\picscalex100\picscaley100\blipupi120

padding of char columns.

PBTrimCharColumns='YES' is in the pbodcXX.ini.

Using code of:

ls_ret = space(5)

ls_val = "ab "

u_tran. sp_test(ls_val, ref ls_ret)

function long sp_test(string input_char5,ref string output_char5) RPCFUNC ALIAS FOR "dbo.sp_test"

only three rows. In the past the correct behavior is for the rowcount to go to 3, the current row changes to 3 and the rowfocuschange events fire for the new current row. But what is now happening is the rowcount goes to 3, but the current row stays at 4 and no rowfocuschange events fire. A dw.getrow() returns 4. This is clearly incorrect and can lead to crashes for example the customer uses the (invalid) current row for other calls like GetItemString and a crash results.

This should be corrected in all versions affected by CR 406259.

animation types are not working:

bottomroll!

centeranimation!

leftroll!

rightroll!

toproll!

using opensheet(), the openanimation is not working.

CloseAnimation appears to work ok when closing the sheet.

label text with 6 Chinese characters or above, PB10.5 will show the Toolbar label text

with half characters at 1st and 6th Chars (Traditional Style Toolbar). As there is limited

display area on the toolbar buttons, toolbar's label text may be trimmed down. But a whole

Chinese character should either be fully displayed or fully trimmed down.

When using PB10.x contemporarytoolbar style, the displayable text will shrink a bit more.

PB10.5 at runtime can show 7 English alphabets or 7 digits.

However, in T-Chinese environment, PB10.5 can only diplay 3 T-Chinese characters.

under the Datatype tab.

Per Engineering: Cannot recreate without a test case and no test case can be provided. Issue closed as not reproducible.

after having saved on existing function using "Save As"

It should be included as part of the statement templates.

I don't want to suppress the messages. I want to be able to do the check-out once I've been reminded that the object is under source control. That is, I *always* want the message. I don't want to have to cancel it, check the object out, and then have to re-attempt the object open....

This problem occurs in all versions of PB tested from 8.0.4 up through 10.5.

when using the Alt key to switch windows.

when using embedded sql.

Using the following sql:

string ls_sql,ls_text

ls_sql = "select /* This is a Test */ 'hello' from dual"

or

DECLARE emp_curs CURSOR FOR

SELECT /* This is a Test */ 'hello' from dual;

open emp_curs;

integer ii_emp

string s_ename,ls_text

FETCH emp_curs into :s_ename;

close emp_curs;

The following works:

declare mycursor dynamic cursor for sqlsa;

string ls_sql,ls_text

ls_sql = "select /* This is a Test */ 'hello' from dual"

prepare sqlsa from :ls_sql;

open dynamic mycursor;

fetch mycursor into :ls_text;

close mycursor;

In the pbtrace.log, only the following shows:

SELECT 'hello' from dual

RESOLUTION: Hints are removed by third party compiler (Lexer) and not from PB. Unable to resolved.

HKEY_CURRENT_USER\Software\Sybase\PowerBuilder\11.0\DBTrace

However, access to the registry (even the HKEY_CURRENT_USER key) is often restricted nowdays. What we do have access to is certain areas of the users profile:

Documents and Settings/ <username>/Application Data Documents and Settings/<username>/Local Settings

I'd suggest that instead (or in addition) to reading the registry, that we could set values in a configuration file in that area to provide the same control. Or perhaps a simpler solution, just default the database trace (and pbdebug trace while you're at it) to the following area:

Documents and Settings/<username>/Local Settings/Temp

That way we know we have access to it regardless of the user's privileges on the machine...

Another suggestion is to add a Browse... button for the location for the trace file?

"Halt Close" will only close those window sheets but the actual

process can still be found in Task Manager.

This is only a problem with .NET deploys.

In a similar vein, there should be some option, if the <appname>_root

directory structure is needed (both for WebForm and Web Services) to

put it *underneath* the <appname> directory. When we're deploying to

the production server, we're generally only going to be able to set up

a single directory for the application.

instead of going to the target property page.

It appears that the web service based datawindow only takes simple datatypes or an array of structures. That's not an option for the output of the web service, at least not without a lot of work that shouldn't be necessary.

That is, I create a web service that retrieves the employee data from the sample database into a datawindow. What to do with it now? The simpliest thing is to extract the XML and return that as a string. The problem is that the web service based datawindow reads this into a single column in a single row. It doesn't appear to be able to determine how to parse the XML return.

In order to create an array of a structure and return that, I'm going to have to manually create a structure that matches the structure of the employee table and then manually transfer the data from the datawindow in the web service to the structure in order to return it.

And the next issue is that (AFAIK), I can't return an array of a structure from a PB object method. There has to be a better way. What am I missing here?

and then you try to run it, if you get the following error:

The specified module could not be found (Exception from HResult: 0x8007007E)

Exception Details: System.IO.FileNotFoundException: The specified module

could not be found.

This is normally because IIS can't locate PB runtime DLLs, such as pbdwn110.dll, pbshr110.dll. Make sure the directory where the DLLs locate is in the PATH.

the webform app is doing a post back to the server.

I tested with PB 10.2.1 and see the same faster retrievals as in PB 8. In PB 10.5 I increased the block size to 1000, and set ServerCursor='NO' in the PBODB105.ini file, but neither of those had any impact on retrieval time. I did notice that in the Datawindow painter in PB 10.5 if I retrieved in the preview pane, it's fast. But at runtime retrieving the datawindow is slow. I did PB traces but could not see anything different except slower times.

error will result:

c:\pse\pse-11\11300279\cc.pbl(cc).cc.open(2) Error C0001: Illegal data type: system.net.mail.smtpclient

c:\pse\pse-11\11300279\cc.pbl(cc).cc.open(3) Error C0001: Illegal data type: system.net.mail.smtpclient

An internal exception was thrown.

C:\pse\pse-11\11300279>if ERRORLEVEL 1 exit 1

Deploy failed.

does not prevent the event to be processed and characters can be deleted

or cursor can move when using the arrow key.

you to enter a retrieval argument, once you enter the argument PB will crash

in the pbshr110.dll:

PBSHR110!PbHeap_panic+237 [e:\pb11\3rdparty\heap\spbheap.c @ 1414]

2. The dialog does not show higher level checkboxes as checked (or in 3rd-state) when lower level checkboxes are selected. When the tree is collapsed it gives the impression nothing is selected, even though something in a child node (hidden) may be checked.

3. The tab showing services has a list view title Selected Services - this should be "Selected Services and Structures" (or perhaps "Selected Objects")... likewise the data item for column 2 will show "Entire Service" even when it's really a structure. If we can't distinguish the service fromt he structure at this point, then perhaps "Entire object" will work?

You can select an event or function in the system tree and hit edit and PB

takes you to that script. Customer would like to see the same functionality

in the Object Browser

1. no method overloading

2. can't return an ANY varaible

these need to be detected BEFORE deployment.

Web Service project gets overwritten with the default value of

'c:\program files\Internet Explorer\iexplore.exe'.

a string array by value, the value of the string array is truncated and garbage.

can occur

Versions and Build #s Tested: PBVM 10.2.1.9671 for Sun Solaris in EAServer 5.3.0(Build 53016) for Sun Solaris

Comments: In a intercomponent call within EAServer 5.3 for Sun Solaris, when component writes in log, the following error message is displayed in EAServer log:

org.omg.CORBA.MARSHAL: offset (24) + length (4) exceeds message size (24)

minor code: 0 completed: No

If commenting out the PBScript that writes in log, the component works fine. This issue is PBVM Sun Solaris localized only. It works fine with Windows PBVM + EAServer 5.3.

on the library tab in the project painter so that users can check/uncheck dlls/pbds quickly.

PER ENGINEERING: This is a documented change when migrating to PB 10.5. Users must explicitly set InputFieldNamesVisible property to "true" in the Rich Text control properties. See the online help "New Features in PowerBuilder 10.5", "New and Updated PowerBuilder Controls", "Rich Text enhancements", "RichTextEdit control changes" topic, "Migration issue" section at the bottom of the topic.

In the WebForm project, Configuration tab, for instance the items are listed in some non-intuitive order making it very diffitcult to find what you are looking for.

is no way to view the source or modify it.

The DataSource menu item is disabled.

RESOLUTION: This is actually fixed in PB .NET 12.0.

on the on Tab pages show up incorrectly.

control, the property is still rendering RaggedRight for a WinForm app.

Winform application.

After you deploy and then run a winform app, you can see the tab pages are much

larger.

1) Not in Alphabetical order

2) No Descriptions to explain what the Properties do

PER ENGINEERING: Use the "ShareData" popup menu in the Data view to see any saved data reflected in the Preview view. Any changes to current functionality would be risky, so no new menu from the Preview view will be added.

messages for .NET winform deployment

1. Jump to code will work for most warnings. It will

open the script and scroll. But the cursor is not on the line. If you

click on the scroll bar, it will then move the cursor to the offending line

of code. It may not be intuitive for users to do that.

2. Scroll to the top of the warnings and you will see an invalid line number

next to several of the warning. For example:

m_quickfind.clicked -1948

m_customfilter.clicked -1766

m_filter.clicked -1601

3. Jump to code not working for all warning message. For example,

n_cst_dxsrv_export.of_exportdata.55 jumps to the n_cst_dxsrv_export.of_buildcomparison

pfc_n_cst_luw.of_updateprep.106 jumps to pfc_n_cst_luw.of_accepttext

Image files (*.bmp; *.jpg; *.gif)

HTML files (*.htm; *.html)

JavaScript files (*.js)

PowerBuilder Libraries (*.pbl; *.pbd) (or is this what the next tab is for? users are confused)

Also the text on this tab "Resource Files and Directory" is wrong - you can't see directories, only files.

The output directory name is also very long and redundant:

<targetname>_WinformOutput

The word Output doesn't seem particularly useful as part of the name. Perhaps it could be removed?

switch - "rowlock" and with MS ODBC driver, the PB Client keep busy with 90% CPU while

the MSSQL server spid is sleeping.

It would be useful to be able to view the results as you are building the SQL so that you can determine if you got it right.

there is a delay to refresh the WYSIWYG menu view.

Not sure if this was just an oversight or if there is a reason it's not included. Also in the DW Painter when you go into the SQL Painter in graphical mode, you can save the current syntax as a Query (via the File menu), but in syntax mode you cannot so there may be a reason it's not there.

It's a trivial issue, but given that it comes from the most customer-facing group at Sybase in terms of PB Users, it merits implementation.

The smart client publication is an option of a WinForm project, with a checkbox on the General tab. With that option checked, users will expect the deployment of the project to create the WinForm EXE AND the SmartClient. It's not clear that a separate option is need. And that option doesn't appear on the context menu for the project either.

Making the publish option more promimnent is one solution; however, that would increase the scope of support because then OrcasScript needs to support it, etc. Making it part of a standard deployment of a project action would simplify it altogether... if the Publish option is checked, it goes as a Smart client, if not just as a WinForm. the settings for SmartClient would be retained if the checkbox is disabled.

This is of course subjective... one reason for perhaps separating the tasks is that Professional may not support Smart Client and so it should appear as a distincitve operation. If the decision is to retain two separate actions, then the fact you have to publish separately should be more obvious ... and it should be in the context menu at a minimum. Some additional text in the project painter would probably also help.

"Error when generating application manifest file. Check that the .Net Framework 2.0 SDK is in the system path."

A workaround is to add the bin direcotry under C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 to the path; however, that is not a solution since we shouldn't be adding .NET 'stuff' to the path. The code that PB invokes here needs to be certain that the bin directory is dynamically in the path or prepended to the command that is issued.

error.

PowerBuilder is configuring your new software installation

During uninstall, the term 'new installation' is a bit confusing for customers.

Specifically, I'm told: --------------------------- Web Service Error --------------------------- Operation: Connect Buffer: Primary WSDL: Method: getemployee Error message: That assembly does not allow partially trusted callers. --------------------------- OK ---------------------------

A PB Smart Client application needs to be able to call a PB Web Service. How do I enable the PB web service to allow partially trusted assemblies to call them? I found I could increase the security level for the Local Intranet in the .Net Configuation to Full Trust and that resolved the error. However, most developers are not going to have rights to do that on production or shared servers, and most admins would be hesitant to do it. What we need to be able to do is have an option that allows us to specify that the assembly should be created with the AllowPartiallyTrustedCallers attribute: [assembly:AllowPartiallyTrustedCallers] . For more information: http://blogs.msdn.com/shawnfa/archive/2005/02/04/367390.aspx

[webmethod] myfunc(sendstr astr_info) and the sendstr contains public DateTime adtm_start

and we call it from Powerbuilder we pass it, eg. german datetime format 15.10.2006

it will arrive as 01.01.1900 on IIS.

The web service proxy wizard (unlike the EAS Proxy Wizard) asks for the PBL in which to store the project AND the proxy objects. If you also select the option to clear the deployment PBL you will lose - at a minimum - your project object. If you store your project in a PBL with other code, you will lose ALL that other code!

wider and saved as a Powersoft report(PSR) then the PSR can be displayed incorrectly after reopening it.

This will cause PB to crash but ONLY if the MenuImage is of type GIF. ICO and BMP works fine.

Workaround: posting of the hide/show() method on the menu item.

ANSI function call or import a file, a conversion take place to convert those ANSI string

to Unicode string. A situation reported is that cust. use external function call to map an

ANSI call C function dll. And it rely on the function call to read and ANSI S-Chinese file

data. A problem happen when the ANSI data fiile is not a PURE S-Chinese data, PB10 only

return the first part of the file string and Truncate in the middle to the end of the file

string. It is observed that the first part of the file string stopped at a Character

which is not S-Chinese. However, there is no warning or error message at all when the

problem happened. On PB8 and PB9, both can import all the string even there is a non

S-Chinese char.

dw_1.create(), PB doesn't automatically move the dw control to the top. You have

to use dw_1.bringtotop=true.

For example,

dw_1.create(ls_syntax,ls_errors) //shows blank in the dw control when dw is within gb

Use:

dw_1.create(ls_syntax,ls_errors)

dw_1.bringtotop=true

an access violation in pbvm110.dll:

FAULTING_IP:

PBVM110!ob_add_const_data+e3 [e:\pb11\runtime\obj_mgr\obconst.cpp @ 502]

116f05c3 f3a5 rep movsd

Customer trying to migrate application from PB 6.5 to PB 11 and is running

into this problem.

File/Open

File/Inherit

File/Run Preview

Browser Window

ToDo List

Need help to investigate and narrow down the possible root cause.

"Access Violation - pbvm100!ob_get_class_entry"

than one blob column to select, the destination column in a database pipeline

does not get updated. It remains the previously selected blob column name.

The customer has datawindows that are in syntax mode with a /* comment */ at the head of the SQL. The customer is using Oracle but the problem happens in ASA as well. These dws work fine in all prior versions of PB. They migrated to PB 10.5 and they open the dw in the painter, but when they click on the Data Source the sql is empty - nothing is there. Edit the source of the dw and the SQL with the comment is there, but you can't get at it in the painter. You can see the problem in any PB 10.5 datawindow. Select Data Source, Convert to syntax, and add a /* comment */ at the top of the SQL statement and save it, then go back into the Data Source and the SQL is gone.

A second problem in the same area is that in all prior versions of PB if you have a complex datawindow SQL and you convert to syntax you can format the SQL nicely, indent etc. so it looks good and is readable. But if you then add a comment as noted above and save the dw, in previous versions you then lose all your formating. PB has moved things all around double spacing etc. It would be very nice if when fixing the comment problem above in PB 10.5 you also could address the format problem and leave what ever formating the user has done in syntax mode alone...

if customer checks "Automatically convert DBCS manipulation functions".

For instance, len() is converted to lenA() when the application is upgraded from PB 9 to PB 10.

Neverthless those functions in DW are left as it be.

Function described to DW should change manually.

The deployment of the registry.xml should be part of the application deployment process. Expecting IIS admin access to the file system on the server is not viable for some customers.

in "clicked", "doubleclicked" and "rbuttondown" events when you click one of the datawindow

objects.

Workaround: Use RPC calls

Versions and Build #s Tested: PBVM 10.0.1_5502 on Linux

Database/Driver File/Version: O90 (libpbo90100.so)

Oracle Server: 10.2.0.1.0

Oracle Linux Client: 10.1.0.3.0

EAServer 5.2 for Linux

PowerBuilder 10.2.1_9731 at Windows XP for client access to PB NVO

Comments:

When having PB_HEAP_DEBUG=true set on Linux environment, when PB NVO component tries to connect to Oracle DB via OCI_9U connection cache, EAServer crashes.

truncated after 4 characters with PB 10.2.1 Build 9761

when the string is in European number format or string

This happens also when the control panel settings for

decimal separator and grouping symbol do not match with the string.

Repeat for Response and MAIN windows.

Sometimes issues like this are fixed with first setting the transparency of the closing window (the popup or whatever) to 1%.

The user does not see the difference, but the internal buffering (layering) is different.

this.transparency = 1

Customer has been told these object could be corrupted and will need to be recreated but he feels as though if these regenerated successfully in PB 9.0.3 then they should also migrate successfully.

Versions and Build #s Tested: PBVM 10.0.1_5502 on Linux

Database/Driver File/Version: O90 (libpbo90100.so)

Oracle Server: 10.2.0.1.0

Oracle Linux Client: 10.1.0.3.0

EAServer 5.2 for Linux

PowerBuilder 10.2.1_9731 at Windows XP for client access to PB NVO

Comments:

When dealing with cursors within Oracle OCI_9U connection cache, the cursor returns

strange characters and/or empty strings instead of correct content of the column data.

If you first put the dot notation value in a variable and use the variable in the expression that also works correctly and evaluates to null. This is a workaround.

clicking on the different variable tabs, pb will crash.

A Visual Studio Just-In-Time Debugger window opens with the following:

An unhandled exception ('System.NullReferenceException') occurred in PB110.exe

result in a empty file when using ghostscript 8.14.

Problem happens with deployed application and ghostscript is in the relative

path of pbdwe105.dll.

Not working in development where ghostscript is also in the relative path of

pbdwe105.dll.

tree and you rmb and uncheck one of the properties (.net types, structures or

enumerations), it causes the contents of the pbl to disappear.

Versions and Build #s Tested: PBVM 10.0.1_5502 on Linux

Database/Driver File/Version: O90 (libpbo90100.so)

Oracle Server: 10.2.0.1.0

Oracle Linux Client: 10.1.0.3.0

EAServer 5.2 for Linux

PowerBuilder 10.2.1_9731 at Windows XP for client access to PB NVO

Comments:

When updating VARCHAR columns from Oracle with 30-character or bigger strings, the NVO component fails when executing setChanges() and then becomes unstable. If accessing same NVO for the second time, EAServer crashes.

If executing setChanges() with small strings instead, the setChanges() works fine.

c:\testnet.pbl(testnet).testnet.open.20 C0322: No label 'test1' within the scope of the GoTo statement

RESOLUTION: This information is already in the Best Practices chapter. See "Avoid the GoTo statement" under the Coding Restrictions section of chapter 16 in the Deploying Applications and Components to .NET book. (With the restructuring of this book, the Best Practices session applies to Web Forms and Windows Forms.)

you select the All Variables view, it appears to be slow to open and show

the variables.

Control has it's own edit control. And each individual column can bind to specific Double

Byte IME (Input Method). In the past, PB8, PB9 and earlier PB10, the last column's IME

method will be retained when tab out from col1 to col2. Thus col2 will use the last touched

IME as default. However, in current PB10.2.1 and PB10.5, all columns will use the OS default

IME as default and ignore the last touched IME. This introduce a lot inconvenience to PB

Application End User.

data can fill up EXACTLY full page with the last row but leave not enough space for

summary band. Thus the Summary Band has to be print out on the follow up page. However,

the last data row occurs two times.

Resize fires BEFORE the open event.

I tested in the latet build of PB9.0.3 (build 8836) and do not see the problem. But in the latest build of 10.5.1 (build 6556) the problem exists.

multiple tab pages in a tab control.

From the dumps provided:

FAULTING_IP:

PBVM105!ob_get_group_instlist_as_shlist+181

0037b301 8b4348 mov eax,[ebx+0x48]

Versions and Build #s Tested: PBVM 10.2.1_9671 on Linux

Database/Driver File/Version: O90 (libpbo90100.so)

Oracle Server: 10.2.0.1.0

Oracle Linux Client: 10.1.0.3.0

EAServer 5.2 for Linux

PowerBuilder 10.2.1_9731 at Windows XP for client access to PB NVO

Comments:

The GetFullState() method improperly transforms a computed field that should display "001 - PERU" into "0 - PERU". We could isolate that the GetFullState() function is improperly transforming "001 - PERU" into "0 - PERU", which prevents any kind of workaround by changing the computed field concatenation, for instance.

Also, Jaguar log displays "001 - PERU" correctly before passing through GetFullState() method. So, the datawindow engine inside PBVM for Linux is working ok. The issue is erradicated in GetFullState() method.

Works in PB 9.0.3.

of the elements of the structures have incorrect datatypes.

For example, from the syb_quote structure:

<s:element minOccurs="1" maxOccurs="1" name="LineOfBusiness" type="tns:LineOfBusiness" />

<s:element minOccurs="1" maxOccurs="1" name="PaymentPlan" type="tns:PaymentPlan" />

<s:element minOccurs="1" maxOccurs="1" name="InsuredPaymentMethod" type="tns:PaymentMethod" />

<s:element minOccurs="1" maxOccurs="1" name="QuoteType" type="tns:FinanceRequestType" />

After deploying the proxy, lineofbusiness,paymentplan,paymentmethod and financerequesttype are all defined as long.

For example, LineofBusiness simpletype is defined as a string.

<s:simpleType name="LineOfBusiness">

<s:restriction base="s:string">

<s:enumeration value="Unspecified" />

<s:enumeration value="Commercial" />

<s:enumeration value="Personal" />

</s:restriction>

</s:simpleType>

RESOLUTION: Not a PB bug.PB uses the Web service engine based on VS.NET. VS.NET does not allow strings for enum. For this Web Service, the default base type

is long with values as Unspecificied=0, Commercial=1, and Personal=2. Simply use the 0,1,2 instead.

FileLength Obtain the length of a file of any size

FileLength64 Obtain the length of a file whose size is less than 2GB

These are reversed.

The procedure is returning a return value, but in PB the function always returns zero.

This dows not work with JDBC ODBC and OLE DB but works finw with Native MSS and ADO.

sometimes (~once a day) a PowerBuilder "PB INTERNAL EXCEPTION" occurs

at the method end but before deactivation.

dynamic sql, the following error results:

Error: Null object reference at line 0

Error happens on the following line of code:

Execute Dynamic psql_proc1_g using descriptor psql1_g.da;

SQLSTATE 07001

[Microsoft][SQL Native Client] COUNT field incorrect or syntax error

PB90.exe Application Error: The exception unknow software exception (0xccccdead) occured in the application at location 0x7c59ba80

Did not occur in previous versions eg. 9.0.2.

The collapse does not take place with the following script: dw_x.InsertRow(dw_x.RowCount() + 1)

just can not create a new WebTarget of that flavour in PB 11 Beta 2.

Workaround: 1. Change the source code in the Open event of the Application to connect to your MS SQLServer 2005 server.

SQLCA.DBMS = "ADO.Net"

SQLCA.LogPass = "sybase"

SQLCA.LogId = "sa"

SQLCA.AutoCommit = False

SQLCA.DBParm = "Namespace='System.Data.OleDb',DataSource='jzittoun-xp\sqlexpress2005',Database='TestPB',TrustedConnection=0,Provider='SQLOLEDB'"

P.S. : You should have more that one database in the MS SQLServer 2005 to show the problem

2. Run the PB 10.5 application

3. Select menu File-->Open

4. Click button ">>" to go to last row

5. Click button "delete1"

==> DataWindow will become empty.

There is an easy workaround:

Edit Source and change this line to introduce the height.autosize property:

Before the change:

detail(height=952 color="536870912" )

After the change

detail(height=952 color="536870912" height.autosize=yes)

I guess what concerns me most is that when there is a assembly loading issue, PB gives also no helpful information about what the issue is. You can see a number of threads in the beta newgroups where people are struggling to figure out what is missing when they get module load errors. And deploying FileMonitor to a production server probably isn't a feasible solution. If PB generated an exception that indicated "Unable to load the Sybase.Public.PowerBuilder.Interop assembly version 11.0.0.5502" or something along those lines it would be a lot more manageable. At least you'd have some indication where to start.

There are additional problems with the shortcut key combinations documented for assigning font attributes as well.

PowerBuilder Application Execution Error (R0035)

This occurs on the following line of code:

lo_ole_word.ActiveDocument.MailMerge.Destination(0) //0 = New Document

This appears to be a duplicate of CR 408573 which was not resolved by engineering but determined to be a Microsoft Office 2003 issue.

The same behavior was seen by development and myself when using VB.NET and searching the internet, it appears as the problem is related to new security features in Office 2003.

This document from Microsoft is relevant.

http://support.microsoft.com/?kbid=825765

I believe the problem we are seeing is related to the following from the above document:

A mail merge main document that is opened by using VBA does not have the data source attached.

Note It could be that you are using a program, for example Microsoft Access or Microsoft Visual FoxPro, to programmatically open a mail merge main document file when you experience the symptoms in this article.

Note Setting DisplayAlerts=none through VBA suppresses the prompt when the file is opened by using VBA, but uses the NO option to open the document and no data is attached to the mail merge main document.

Intention is to open a case with Microsoft to find out if there is a resolution to the above when using Word with OLE automation.

Work-around: Hide the toolbar with ToolbarVisible off before triggering ChangeMenu()

different in the column specification of a datawindow.

For example, if you create a table:

create table dbo.test_unicode (id int not null, col_uni30 univarchar(30) null, col_unichar30 unichar(30) null) ;

It gets defined as: (I believe this is documented per ASE doc)

id int

col_uni30 univarchar(60) null

col_unichar30 unichar(60) null

But in the column specification view of a dw it will still show the column length as 30.

When a GroupCalc() function is called in the ItemFocusChanged of a treeview datawindow,

then the column on the other rows may become protected.

Workaround: Store the value into a decimal {9}

dw_graph.Object.gr_epd.Values.MinorGridLine = 3

If you set the value at runtime than property workes ok. If you set at runtime the

following,

dw_1.Object.gr_epd.Values.DropLines = 5

Then DashDotDot appears ok in the graph. However, in the PB IDE if you select

DashDotDot(5) from the ddlb and save the dw, in the dw source the value of 0 shows.

For the following values:

In the PB IDE, if you select the following:

DashDotDot(5) - In the dw source, Values.DropLines = 0 appears

DashDot(4) - In the dw source, Values.DropLines = 5 appears

Dot(3) - In the dw source, Values.DropLines = 4 appears

Dash(2) - In the dw source, Values.DropLines = 3 appears

Solid(1) - In the dw source, Values.DropLines = 2 appears

None(0) - In the dw source, Values.DropLines = 1 appears

W/A : Using Windows2000 compatibility mode. OR Modify application. {yield(),setfocus()}

Suggested workaround was to use the db commands STOP Database UNCONDITIONALLY or STOP ENGINE UNCONDITIONALLY. But both of them require to have a connection to db.

and using the OLEDB interface, the .msi file is not including the pbodbXX.ini file.

with winform or webform applications.

CheckMenuRadioItem is defined as:

function boolean CheckMenuRadioItem(ulong hmenu, ulong idFirst, ulong idLast, ulong idCheck, ulong uFlags) library user32.dll

The function is called in the app as:

CheckMenuRadioItem(menuHandle, 0,0,0,MF_BYPOSITION)

The customer is aware that Sybase recommends that each developer has the pbls locally.

connect to a db, the dbhandle() value retains it value when the transaction object goes

out of scope and then recreated again.

For example, if you use the code on a clicked event of a cb_1:

transaction mytrans

mytrans = create transaction

mytrans.dbms = 'o90'

.

.

connect using mytrans;

long ii_handle

ii_handle = mytrans.dbhandle()

destroy mytrans

When you rerun the code, the sqlerrtext says that the 'Transaction is already connected' and the dbhandle() retains the same value (from the first run).

The best practice is to use a disconnect and the dbhandle does get reset.

But if the transaction object goes out of scope and then recreated, it appears the db connection remains and the dbhandle() is the same value.

used as: dw_1.Find("test<>'.'", dw_1.rowcount() + 1, dw_1.RowCount() + 2)

The statement returns the last row number, but it should return 0 since

the start and end value are higher than the total rowcount.

[RichText]

PageSizeAsControlSize=1

However if you check wordwrap on the rte control, the page size is off by several characters. It wraps a few characters too late. And then a character or two of each line is out of view on the right side. This problem is exacerbated if there is a vertical scroll bar on the rte. That does not seem to be taken into consideration for when to wrap and even more characters are out of view on the right side if there is a vertical scroll bar.

Versions and Build #s Tested: PB 10.5.1_6021 and 10.5.1_6565

Database/Driver File/Version: N/A

Comments: At runtime, PB COM+ components freeze client applications when they are being accessed by multiple PB clients at same time.

For immediate reproduction, use an Intel Core-Duo machine or a physical duo-processor machine. If you use a single-processor machine, the issue gets reproduced after 10-15 min of runtime.

Versions and Build #s Tested: PB 10.5.1_6021 and 10.5.1_6565

Database/Driver File/Version: N/A

Comments: inkPicture control inside datawindow does not show pictures from image columns. The inkPicture control displays blank data.

Customer can't use OLE Database Blob since the images were stored in database image columns via UPDATEBLOB, and not stored via Datawindow OLE Database Blob.

looses its umlaut.

For example:

&謕en...

Will appear as:

zpen...

This crash did not occur when they were using build 6537.

The feature works as expected in Two Tier Client Server.

Customer has problem on the EAServer / PB application and need Sybase clarify two issues:

1) Is SQLCA.LOCK=[0,1,3] work with SYJ in EAServer under Official Support and recommended to use ?

see CR266321 was not fixed. Does it mean problem only affect JDBC connection

but SQLCA.LOCK feature can still be used with SYJ driver in PB Component and under support?

2) A transaction object DOES NOT submit a Clause with SQLCA.LOCK, thus only rely on the Default, (ASE Database Default is isolation level = 1, i.e. LOCK=1, committed read),

there is a chance that PB Component get connection from Cache which was using SQLCA.LOCK=0.

In that case, it is always expected the PB Component use Database's default LOCK=1.

However the actual isolation level obtained from Connection Cache may be LOCK=0.

when trying to call a static method in a Java class

"CORBA Runtime Error Occurs when try to invoke PB method........."

Side effect occurs when the database connection push back to Connection Pool and reuse by

other PB component.

After turn on the IIOP Trace log in EAServer side, Jaguar.log get hundred lines of the

error. Thus need Engg. help to investigate the investigate the IIOP log, and trace out

the possible cause of the Corba Runtime error.

Saving the same datawindow to a TEXT! file works correctly. PB puts delimiters (double quotes) around the string fields with the carrage returns. It seems that something similar should be happening to the CSV! output as well. If you SaveAs Text! and then ImportFile the created text file it imports back into a datawindow the same as the original. But if you SaveAs CSV! the same datawindow, PB is not able to ImportFile the created csv file back into a datawindow. It should be able to import it's own file back in and have the datawindow look the same.

the following error results:

SQLSTATE=22001

[DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]Character data, right truncation occurred; for example, an update or insert value is a string that is too long for the column, or a datetime value cannot be assigned to a host variable, because it is too small."

Possible caused by DB Error: "Select Error: Decimal conversion error. PowerBuilder supports only 18 decimal digits." with EAServer 5.2 on Solaris, PB 10.2.1.9671, Solaris 5.8, O84, DisableUnicode=1

For example, when the following data is shown on DW.

col_1

----------

A

AA

B

BB

C

CC

a

aa

b

bb

c

cc

The following codes are added to application.

------------------------

string fil

fil = "(col_1 >= 'a' and col_1 < 'c')"

dw.setfilter(fil)

dw.filter()

------------------------

PB10 will return the wrong result.

An uppercase letter must not be contained.

col_1

----------

A

AA

B

BB

a

aa

b

bb

The right result.

col_1

----------

a

aa

b

bb

Exception Setting window in the debugger, online help doesn't appear.

debugger', PB is not showing the proper message and not pointing to

line where exception happened in debugger.

When setting off a dividebyzero exception in PB Native the error is:

PowerBuilder Exception Thrown Out

Type: dividebyzeroerror

Text: "Divide by zero at line 13 in clicked event of object cb_1 of w_main"

When running Winform, the error is:

PowerBuilder Exception Thrown Out

Type: E

Text: "Divide by zero at line 0 in function clicked of object cb_1 at

line -1 in Sybase.PowerBuilder.PBRuntimeError.Throw

In MDI application, if the changed toolbar's style is not same with current toolbar's style in sheet window, after change menu, it will keep current toolbar's style.

When printing the DW, it takes too much time with PB10.5 comparing to previous versions.

was saved in PB using Excel8!, it looses the fractional decimal places

when the decimal separator is a comma.

Problem started happenning in PB 10.2.1 (build 9681). Works ok in PB 10.2.1 (build 9676).

Problem using dw_1.SaveAS('c:\test.xls',Excel8!,true) and saving *.xls from

dw painter using File/Save Rows As.

input fields are not set properly when using InputFieldChangeData().

If you RMB on an input field and select properties, you can see the Data Value

is incorrect.

When using Winform, the text appears to wrap correctly within the display area.

However on Winform and PBNative, if you click on the Picture Button where the powertiptext is assigned, the powertip will not display again.

when using default A4 paper when populated using the InsertDocument function.

webDW.Generate()

method. When looking at the following help it is unclear whether or not this should result in a -1 or not. If bad DW syntax does not result in a -1 what failure would result in a -1?

What does "..database error messages, are also generated inline." translate to in order to catch errors? Customer is currently using GetLastError().

Following is from Help on Generate:

Return Values

Integer. 1 indicates success, and -1 indicates failure.

Usage

At runtime, Generate performs the tasks required to generate the dynamic HTML including retrieving the action context and generating the HTML inline. Connection errors, including database error messages, are also generated inline.

How do I resolve .Net migration the issues? What changes in the code do I need to make? There is NO guidance as to how to make them compliant.

Take the following error, as an example:

C0324: Calling an indirect ancestor event ('connection') is not supported in .NET

How should that be remedied? I have no idea and there are NO examples ANYWHERE!!

I would think that MANY long-time PB developers, when making the leap to a .NET deployment would/could have similar issues. Things that are legal in PB are no-no's in .NET.

Help us long-time PB developers out. Help us make the transition easier or risk losing us entirely.

We need an enhancement to clarify the steps to be taken on unsupported features and warnings.

PKB 2.0.4.940 ScannerNAme property is mandatory to make barcode Open() work

Workaround: Add an dw_1.InsertRow(0) statement before dw_1.Object.Data reference.

PER ENGINEERING: This has been fixed by other CRs. The crash does not occur in PB 10.5 build 6597 and later.

Work-Around:

Change encoding from Unicode LE to ANSI/DBCS of the .reg file by using the Save As feature of the PB editor.

Could not find element by name: Entity

The error message is : "Error Of Unmarshal of request. Request XML may not be valid"

a sheet is opened in mdi application.

Problem happens when menu is traditional or contemporary.

Works ok in PB Native code. The F6 key works when you close the sheet.

PowerBuilder 10 application using dynamically created crosstab datawindow is not working in PB 10.5. Upon migration, execution of the application give an error "Please refresh crosstab definition". After doing that, initial retrieve succeeds, but subsequent Modify() and retrieve gives the same error.

a script is calling a function that is passing a datwindow by reference and

the function name has dashes, the following error results:

Error when compiling generated c# code:

w_desc.ue_pre_save(7,40): error CS1002: ; expected

w_desc.ue_pre_save(7,41): error CS1520: Class, struct, or interface method must have a return type

The message doesn't exist in earlier versions of PB or in PB 11. Is this behavior going away?

But if another window is shown on the target window, two windows will overlap and will be printed.

with the following message:

//<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Header/><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>reqId UNKNOWN: Unable to retrieve lookup user/req_id.</faultstring></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>

Customer believes the header is not being sent with the ws request. Testcase includes

11325882_valid_request.xml and 11325882_INvalid_request.xml shows difference in

output is the header. The 11325882_valid_request.xml taken from another app

where web service worked ok.

RESOLUTION: Workaround is to initialize the following values:

security.encodedmustunderstand = "0"

security.encodedmustunderstand12 = "0"

security.encodedrelay = "0"

The reason is the .NET framework required above variables to be set. PB doesn't care what the values are, but .NET requires it to be either "0" or "1"

depending on what the customer wants. In the customer's case, the values were not set and PB defaulted to an empty string. But .NET didn't allow them

to be an empty string.

following message appears in the log file:

Feb 26 11:27:39 2007: 180916-System exception 'CORBA::BAD_OPERATION' thrown by component 'Jaguar/Management' method 'isEjbProxyServer'

Feb 26 11:27:39 2007: SystemException: BAD_OPERATION (Jaguar/Management/isEjbProxyServer - jagadmin@10.18.43.234)

Component appears to deploy ok.

and that pbl contains a userobject with a external global function, you

cannot open a userobject unless you regenerate the object.

When you try to open the object, the following message results:

Select User Object

Open of User object failed. It has been migrated to current version format,

but must be successfully regenerated.

has a local external function defined as:

function int AT_BeginAcquire() LIBRARY "ocx\traxappbio.dll"

The following deployment error results:

w_start(32,97) error CS1009: Unrecognized escape sequence

after you expand a pbl and then rmb on a object, the context menu for source

control doesn't appear. It shows the context menu as if your not connected to scc.

If you wait a few seconds and then retry, the scc context menu appears.

I realize a separate thread is running in the background. But the objects

show that they are registered within source control (green dot).

Versions and Build #s Tested: PB 10.5_5079, 10.5.1_6565 and 10.5.1_6595

Database/Driver File/Version: N/A

In debug mode, if you hover the mouse over the PDOM_ELEMENT declaration inside button code to see the alt value, PowerBuilder crashes.

datawindows, the following crashed occurred:

FAULTING_IP:

PBSHR105!PbHeap_panic+237 [e:\pb105\3rdparty\heap\spbheap.c @ 1421]

10bdd127 cc

065ce1ec 10bdd666 0cd04d20 ffbbffbb 00000021 PBSHR105!PbHeap_panic+0x237 [e:\pb105\3rdparty\heap\spbheap.c @ 1421]

065ce1fc 10bdc7c7 0cd04d20 065ce21c 065ce224 PBSHR105!PbHeap_sizeEx+0x66 [e:\pb105\3rdparty\heap\spbheap.c @ 2681]

065ce60c 10bdd076 00000000 0cd04d20 0d7d0b94 PBSHR105!print+0x27 [e:\pb105\3rdparty\heap\spbheap.c @ 1256]

065cea78 10bdeba2 0cd04d20 0cd04d20 0cc56138 PBSHR105!PbHeap_panic+0x186 [e:\pb105\3rdparty\heap\spbheap.c @ 1387]

065ceacc 107ee52f 0cd04d18 0d7d0b94 00000000 PBSHR105!PbHeap_free+0xb2 [e:\pb105\3rdparty\heap\spbheap.c @ 2288]

065ceaf8 107eea8f 0f3959c8 0d7ff804 00000001 PBDWE105!dwTableResetNestedReports+0x1af [e:\pb105\dw\engine\table\dwtretr.cpp @ 3592]

065ceb34 107eefe2 00000000 00000001 00000001 PBDWE105!dwTblResetcontent+0x30f [e:\pb105\dw\engine\table\dwtretr.cpp @ 1847]

065ceb54 1066143c 0d7d0b94 0d0fb924 0d7d0b94 PBDWE105!dwTableReset+0xe2 [e:\pb105\dw\engine\table\dwtretr.cpp @ 125]

065ceb70 107d27ed 115d9c72 07adac78 0d7c7320 PBDWE105!DWDataWindow::Reset+0x5c [e:\pb105\dw\engine\object\dwofun.cpp @ 1665]

065ceb74 115d9c72 07adac78 0d7c7320 065ceb90 PBDWE105!DWSemanticFunctions::Reset+0x5d [e:\pb105\dw\engine\external\dwesf.cpp @ 1351]

065ceba4 1162a7fc 0d0fb924 00000000 00000001 PBVM105!fnReset+0x62 [e:\pb105\runtime\function\fndwm.cpp @ 550]

065cebe8 1162a339 00000000 0def0060 000000c0 PBVM105!OB_RUNTIME_CLASS::invoke+0x4ac [e:\pb105\runtime\obj_mgr\obclass.cpp @ 2523]

065cec30 1164851d 0d0fb924 0def0060 000000c0 PBVM105!OB_RUNTIME_CLASS::invoke+0x1c9 [e:\pb105\runtime\obj_mgr\obclass.cpp @ 2332]

065cec54 11690e42 00000000 000000c0 00000000 PBVM105!OB_OBJECT_LOCAL::invoke+0x2d [e:\pb105\runtime\obj_mgr\obobjloc.cpp @ 1252]

065cecc8 1174fb8a 0d0fb924 00000040 00000000 PBVM105!ot_process_dotfunccall+0x4c2 [e:\pb105\runtime\obtools\otcalls.cpp @ 327]

065cecec 116a81e1 0d0fb924 0e3e25ba 0d0fb924 PBVM105!sf_dotfunccall+0x3a [e:\pb105\runtime\semfuncs\sfcalls.cpp @ 90]

07983888 115d9c0f 07969080 00000000 079690b0 PBVM105!rt_exec_pcode+0x371 [e:\pb105\runtime\engine\rtengine.cpp @ 2722]

07969050 00000000 00000000 00000000 00000000 PBVM105!fnModifiedCount+0x9f

Workaround: In stored procedure, instead of "select null;" use "select convert(datetime,null)". Obviously this is an over-simplification of the situation, but using the Convert function should work.

OLE object function in certain condition.

Problem seems related that small size of the OLE Control cannot

display the OLE Object. Testing result show that OLE Object is not instantiated when the

size of control is too small (or invisible ).

Problem may be workaround by one of or combination of below.

- Adjust the Control size by code at runtime.

- Resizeable = true (resize manually)

- SizeToDisplay = true.

However, it may not be considered as the resolution to the problem.

for a winform application.

A uo function calls another uo function returning a long. That return value of

type long is evaluated in a case statement and always evaluates to the case 0

expression even though the value 211288064.

rett2 = rett // both values are 211288064

choose case rett2

case 0 // pb winform falls into this case statement

err = 'System was out of memory'

SQLDbCode= 999

SQLErrText= SQLSTATE = S1090 [Sybase][ODBC Driver]Invalid string or buffer length

--------------------

PocketBuilder version 2.0.4

ASA9 9.02 build 3221 as well as SA10 (10.0.0 build 2781)

We just started using long varchars so I don't have much older information than that.

Versions and Build #s Tested: PB 10.5.1_6595

Datawindow shows strange at the end of char and varchar column data read from database. It was reproduced with both Microsoft SQL Server via OLEDB interface and also with ASA db by using ODBC interface. The issue does not happen with external datawindows. To reproduce the issue, the datawindow must read data from a database.

dw control for a PB Webform, no pointer (arrow or hourglass) will show.

The pointer does appear ok for PBNative and PBWinform.

This is a change of default behavior.

We added a registry entry to _enable_ the PBTest API (often called PB TAPI).

Previously this was always enabled, but with Vista being sensitive about applications registering COM servers willy-nilly, we made this optional.

The behavior change is that this now checks a registry entry before deciding to register the COM server. Previously, we would blindly register the server.

Registry Entry:

This affects both the IDE and customer generated applications.

Branch: HKEY_Current_User\software\sybase\PowerBuilder\11.0

Entry: EnableTestAPI

DWORD Value: non-zero value means to enable it (true state)

absent or zero means to NOT enable it

type: throwable, runtime and exception, there a icon next to the getmessage and

setmessage, in the function list, indicating their is viewable code, but there is none.

runtime error is cuased by an exception.

Possible workaround: catch the exception and ignore it.

Versions and Build #s Tested: PB 10.5.1_6021 and 10.5.1_6595

Database/Driver File/Version: ASA 9.0

Comments: The dw filter never works for TABULAR dw that is pasted in composite datawindow when datawindow is fullfilled via GetFullState/SetFullState. If we use a grid datawindows instead of TABULAR one to be pasted in composite datawindow, and still perform GetFullState/SetFullState action, the filter works fine.

If we open the composite dw, or one of the child dws directly in db painter, or if we retrieve the dw directly (without using GetFullState/SetFullState), all works fine, too.

allow editing of fields in pdf like when a PDF file is generated using

Adobe PDFForms.

Further investigation is needed.

Extract from newsgroup posting:

What would be really cool is to allow us to enter something like this:

iconfile.dll;56 which would cause it to load icon #56 from the file

iconfile.dll. This would allow us to refer directly to operating system

icons without having to extract them and include them in our app.

Notes:

a) This feature works for icons and bitmaps.

b) When building the application, tick the "PKD" checkbox and deploy the PKD.

This avoids an "Unresolved Resource" issue during the build process.

c) The resource DLL (or EXE) that is the source of the icon or bitmap image will remain loaded for the lifetime of the process.

dw_1.Modify("emp_lname.height = 50")

//dw_1.object.emp_lname.height = 50

But after that the current row has changed to 1. This did not happen in version in builds prior to 5073. Same behavior using dot notation as well. The current row should not change on this modification.

when assigning an any variable to a different datatype in a function.

If using PFC of_getitem of n_cst_dwsrv then modify code to enable this. See workaround field for more details.

For example through using a switch in the pb.ini file.

When filter() is used, a different result from a previous version may be returned.

This may be related to either bluetooth or having the autosize height in the header band.

ASA 9 works fine.

The application will need to be rebuilt and redeployed from the project painter to take advantage of the changes for this issue.

NOTE:

There may still be memory constraints when mixing PocketBuilder and SA-10 on PocketPC-2002. Beware when using this combination.

For instance 100 ms will be send as 99 ms.

ORCASCR110 /H should bring up a help dialog that shows a Quick Reference Guide.

Also ORCASCR110 ? will now launch the Quick Reference as well.

Work-around is to call the Powerscript function LastPos from within the expression.

on a pbl where its target is not the 'current target', the search engine

finds no matches.

If you search by target, the search engine will find the results ok even when

the target is not the current target.

This behavior has been around since PB 9.0. Problem happens in the library

painter and workspace.

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PBVM 10.2.0_8050 and 10.2.1_9823, EAServer 5.2_52025 for Windows

Database/Driver File/Version: N/A

Comments: After some hours working, PBVM causes EAServer to crash with EXCEPTION_ACCESS_VIOLATION.

fails with the following errors:

[djc] The system is out of resources.

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] Consult the following stack trace for details.

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] java.lang.OutOfMemoryError

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] com.sybase.djc.compiler.CompilerException:

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] The system is out of resources.

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] Consult the following stack trace for details.

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] java.lang.OutOfMemoryError

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.compiler.JavaCompiler.run(JavaCompiler.java:820)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.compiler.JavaCompiler.javac(JavaCompiler.java:732)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.compiler.JavaCompiler.run(JavaCompiler.java:583)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.compiler.JavaCompiler.start(JavaCompiler.java:250)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.compiler.JavaCompiler.start(JavaCompiler.java:204)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at java.lang.reflect.Method.invoke(Method.java:324)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] at com.sybase.djc.bootstrap.StartApplication.main(StartApplication.java:320)

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread [djc] COMPILE FAILED

2007-03-26 13:05:12.844 INFO TaskScheduler:ExecuteThread

RESOLUTION: Customer needed to adjust the jvm parameter in the

set-ant-opts.bat file. This file gets called from the djc-ant-bat.

set DJC_ANT_OPTS=-Xmx512M -XX:MaxPermSize=512M

the column is VarChar 100 for example - you would not expect to receive any

return values > 25. However, in testing data lengths with 40+ characters,

the LastPos ( ) with a 25 character limitation can return 27, 33, 41, etc.

Customer reinstalled EAServer 6 and this new install does not exhibit the crash.

following error returns:

org.xml.sax.SAXException: WSWS3047E: Error: Cannot deserialize element

It worked in WebSphere 5.1 because the standards were more laxed while 6.0 is more strict. See http://www-1.ibm.com/support/docview.wss?uid=swg21220377.

With the O90 and O10 a possible memory leak is significantly smaller.

result under PowerBuilder 11 when connected to an SYC Sybase database when TrimSpaces=1.

According to customer this is non-backward compatible behavior to trim tabs as well as spaces. Spaces have been trimmed for a number of years and we expect that,

however tabs are still meaningful data and having those trimmed now is a

data loss.

It appears as though tabs and possibly any other white space characters are being treated as spaces and are trimmed when connected with SYC.

Connecting with OLE DB to MS SQL Server does not trim tabs so this is also inconsistent behavior.

Workaround: Replace the global_fx(sum(t)) with the following expression global_fx(dec(string((sum(t)))))

Work-around:

Source Edit the datawindow (copy) and locate the beginning of the table and put a \par before it

i.e. replace

..\margb0\trowd\row0...

with

..\margb0\par\trowd\row0...

an underscore, but a not Flat style button does not, until the Alt key is pressed.

If the focus is on a datawindow then pressing the Alt key does not make the button show the shortcut.

In the development environment it is not predictable if the shortcut is shown for a non flat button.

does not lead to a selectionchanging of the tab.

When a menu item has a Toolbar with both a ToolBarItemName and ToolbarItemDownName and

you open/close a window, GDI will increase.

For every window that is opened/closed and using Hide() on a particular menu item, GDI

will increase by 2. Memory usage also increases.

For every window that is open/close and the menu item has a ToolBarItemName and

ToolbaritemDownName, GDI will increase by 1.

For every window that is opened/closed and using visible=false on a particular menu item, GDI will increase by 1.

Problem happens in development and running application exe.

1) One Scc_Get() call is used to refresh an array of PBG file names all at once.

2) Entries in the status cache are reset to indicate that PBG files have recently been refreshed.

3) Follow-up "Add to Source Control" and "Remove from Source Control" requests check to see if the PBG files have recently been refreshed. A new PB.INI entry:

[library]

sccpbgrefresh=nn (default is 10)

allows the user to customize this setting depending on whether other developers are simultaneously working on the same target.

4) There is no need to refresh the PBG files at all when building the checkview dialog for certain SCC target-wide operations: Checkin, Checkout, Undo Checkout.

Workaround: Replace char(6) with varchar2(6)

for example PL (polish) --> EN (english) . Also when changing back to PL and working on the Document, then it changes back again to EN.

following error results:

---------- Error messages:

Error when compiling generated C# code:

n_powerwhizz(1516,40): error CS0030: Cannot convert type 'Sybase.PowerBuilder.PBStructure' to 'int'

n_powerwhizz(1527,42): error CS0030: Cannot convert type 'int' to 'Sybase.PowerBuilder.PBStructure'

n_powerwhizz(1608,40): error CS0030: Cannot convert type 'Sybase.PowerBuilder.PBStructure' to 'int'

n_powerwhizz(1618,37): error CS0030: Cannot convert type 'int' to 'Sybase.PowerBuilder.PBStructure'

n_powerwhizz.getstatus(SS)(115,3): warning CS0162: Unreachable code detected

---------- Finished (10:07:36 AM)

RESOLUTION: PowerBuilder external function is mapped to the .NET Platform Invoke, which requires that the structure passed into the external function be exactly of the type declared. Otherwise the PowerBuilder .NET compiler issues an error.

LogInfo li

CopyMemory(ref li, 20) //error!

To solve the above issue ,declare one more external function as follows:

Subroutine CopyMemory(ref LogInfo li, int size) library 揳bc.dll�

Validation error Item '2000-00-01' does not pass the validation test.

Design mode. Minor changes like moving database column, PB will restructure the Datawindow

Syntax. However, the pre-defined dbalias will be lost after the minor graphical movement.

Cause no test client for the issue we give a suggestion to check customer's application.

Customer is upgrading to EAServer 6 and is receiving an error in their log file that is not in our database. The error is:

2007-04-10 08:07:25.383 INFO Thread-53 [JaguarServer] DBMS = 'O90' stored.

2007-04-10 08:07:25.383 INFO Thread-53 [JaguarServer] CacheName = 'OraclePROD73' stored.

2007-04-10 08:07:25.383 INFO Thread-53 [JaguarServer] EIRP DBMS = '' stored.

2007-04-10 08:07:25.383 INFO Thread-53 [JaguarServer] EIRP CacheName = '' stored.

2007-04-10 08:12:20.517 INFO Thread-53 [ConsoleOutput] java.lang.Exception: POSSIBLE CONNECTION LEAK: Component obtained Native Connection by calling getConnection here, but releaseConnection was not called subsequently, so the Component still holds the Native Connection. If the Component tries to use the Native Connection again this may cause a server crash.

Customer had previous problem in CR 463923 which I did receive when deploying his targets to EAServer 6 but which were taken care of with the following in the set-antopts.bat

set DJC_ANT_OPTS= -Xmx512M -XX:MaxPermSize=768M

are different than that called from a Java Client.

RESOLUTON: Customer implemented a workaround that doesn't use the xs:any datatype. This

workaround involved writing a different response message for each operation.

if(getrow()=currentRow(), rgb(255,255,204), rgb(255,255,255))

The dw doesn't change colors properly when you click on a row. Using a freeform

datawindow where the taborder is set to 0.

and you tab out of that column, the data will disappear.

RESOLUTION: Customer has gone into production, original problem not seen

query mode returns no results.

[Edit Mask Behaviors]

AutocompleteDates=yes

But that had no effect for me.

PB is autocompleting the day from 00 to 01, but not autocompleting the month, leaving it at 00 and that causes the validation error.

However, In PowerBuilder 10.5.1, if different users are owning different objects DW column names will be shown only as "columnname".

syntax for the Use Ellipsis property for a columns edit or editmask style.

when a column uses the EditMask style.

Versions and Build #s Tested: PB 10.2.1_9823

EAServer 5.3 on Sun Solaris

PBVM 10.2.1_9671 and 10.0.1_5502 on Sun Solaris

Database/Driver File/Version: PB JDBC Interface connecting to Oracle 10g

Comments: There's a datawindow container with a Datawindow that allows update against Oracle database with the following update properties:

Where Clause for Update/Delete:

- Key and Updeateable Columns

Key Modification:

- Use Delete then Insert

When updating the datawindow component from within a 3-tier PB Client application, EAServer log produces the following error in DBError event of datawindow:

Abr 19 12:56:53 2007: Event Dberror, Clase: u_ds_jaguar, Code: -3, Error: UPDATE etpl_tippla SET tpl_nombre = 'PLAN DE EJECUCION DE CURSOS DE PERFECCIONAMIENTOS' WHERE tpl_codigo = 80 AND tpl_nombre = '龕€劙€齺€劯€� €剱€齾€個€齾€劏€齾€剬€龝€剬€龎€劶€龓€個€齽€剶€� €剬€龝€厛€龘€劶€龘€個€齽€剶€� €厐€齾€厛€龁€剶€齼€剬€龎€劶€龓€剟€龒€劋€齾€劯€龜€劶€' AND tpl_descripcion IS NULL AND tpl_area = 'P'

Abr 19 12:56:53 2007: Event Deactivate of object: n_cst_basico 12:56:53:000000

If we alter "Where Clause for Update/Delete:" to either "Key Columns" or "Key and Modified Columns", the 3-tier datawindow update works fine.

Versions and Build #s Tested: PB 10.5.1_6627 and 10.5.1_6602

Database/Driver File/Version: PB ODBC connecting to SQL Server 2000

Comments: In core-duo and duo-processor machines, when PB clients call PB COM+ components, the following error message occurs:

PowerBuilder Application Error (R0035)

Application terminated.

Error: Error calling external object function of_retrievedw at line 15 in function of_loadproduct of object n_cst_product.

IMPORTANT: This issue does not happen in single core/single processor machines. This is restricted to core-duo/duo-processed machines.

The first time the itemchanged event is triggered, it does not go to

the event handler script.

The following is in the itemchanged event:

tring ls_t1, ls_t2

#IF DEFINED PBWEBFORM THEN

This.JavaScriptFile = "C:\pse\pse-11\11349308\mytest.js"

This.OnClientItemChanged = "MyItemChanged"

#END IF

MessageBox("PB", "Hello PB")

// <<-- This message appears only once

CHOOSE CASE dwo.Name

CASE 'tekst'

IF Pos(This.GetText(), 'test') = 0 THEN

RETURN 2

END IF

CASE 'decimals'

ls_t1 = data

ls_t2 = This.GetText()

MessageBox('Test', ls_t1 + '~r~n~r~n' + ls_t2)

END CHOOSE

//mytest.js

function MyItemChanged(sender, rowNumber, columnName, newValue)

{

if(columnName == "tekst")

{

alert("ItemChange from mytest.js")

return

PBDataWindow_ItemChangedReject(sender, rowNumber, columnName, newValue) }

else

{

alert("Reject from mytest.js")

//do nothing //

document.Form.submit();

}

}

label datawindow, the column is not getting align flush to the border of the

label.

This cr is a continuation of cr466179.

In PB 10.2.1, it throws error:

SQL Error: ORA-12560: TNS Protocol Adapter Error

In PB 10.5.1 and PB 11.0:

Current NLS_Charset setting is not supported by not supported by EAServer or MTS. -----> Oracle 9i client

SQL Error Unable to locate ORAMTS.DLL. Ensure that Oracle 8.1+ is installed. --> Oracle8i client

SMTP mail, getting the following error:

---------- Error messages:

().instance variables.68 C0051: No overload for method 'add' takes '1' arguments.

Error happens on:

message.Attachments.Add(attach)

Here's the full codeline:

#if defined PBWEBFORM then

System.Net.Mail.MailMessage message

System.Net.Mail.Attachment attach

System.Net.Mail.MailAddress fromaddress

System.Net.Mail.MailAddress toaddress

message = create System.Net.Mail.MailMessage

fromaddress = create System.Net.Mail.MailAddress("fromaddress@sybase.com")

toaddress = create System.Net.Mail.MailAddress("toaddress@sybase.com")

attach = create System.Net.Mail.Attachment("C:\testtt.pdf","application/pdf")

message.subject = "Test subject Text"

message.body = "Dear Fred, Here is your PDF File."

message.From = fromaddress

////COMMENTED OUT BECAUSE OF DEPLOY ERROR

message.Attachments.Add(attach)

#end if

RESOLUTION: add() method is from Collection<Attachment> class which is the base class of AttachmentCollection class, generic data type is not supported by PB.Net compiler now.

the datasource to a different stored procedure, the updatewhereclause property

is not being set properly.

All the columns have updatewhereclause=no even though all the columns are

highlighted in the Updatable Columns box from the Specify Update Properties window

and the Allow Updates checkbox is checked.

No Workaround

If instead of highlighting and deleting the text you hit the backspace key to delete the text, there isn't a problem.

Also, when one tries to print the rich text datawindow, the correct number of copies are printed but they are all of the same record.

nd similar functions that can read config (XML) files rather than INI files.

SQL Error -201 : A syntax error has occurred.

SQL Error -217 : Column ( PBE_EDIT) not found in any table in the query (or SLV is undefined).

Work-around: Use an ODBC connection for edit style maintenance

line is getting clipped.

The last word of line one is getting clipped.

RESOLUTION: Document needed margins adjusted.

change, the cursor will then move to the top of the script.

This creates a problem when you have a large script, you then loose

your location in the script.

Happens eg. when the computed field has a expression eg. left (string(long_col), 3).

Work-around add a picturecontrol to the window having the same icon and make it invisible.

dump reports the following:

FAULTING_IP:

PBVM105!FN_CtlFreeAll+1d [e:\pb105\runtime\function\fnctl.cpp @ 1347]

115450ed 8b82d8000000 mov eax,[edx+0xd8]

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 115450ed (PBVM105!FN_CtlFreeAll+0x0000001d)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 000000d7

Attempt to read from address 000000d7

DEFAULT_BUCKET_ID: APPLICATION_FAULT

PROCESS_NAME: ims.exe

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

READ_ADDRESS: 000000d7

BUGCHECK_STR: ACCESS_VIOLATION

THREAD_ATTRIBUTES:

LAST_CONTROL_TRANSFER: from 115450fd to 115450ed

change the name and then change the border style of all the columns on the dw,

the border style change does not take effect in the preview pane.

You have to change close the dw and then reopen it for the change to take effect.

A leak was not seen when using the SetNull function on the structure attribute.

Select two objects in the DataWindow Painter Design view, then select the Format>Align menu, I see a cascading menu with 5 apparent choices. Unfortunately the choices are not distinguishable and it's not at all evident what any of the alignment choices are.

The same appears to be true for all the Format cascading menus: Format>Space, Format>Size, and Format>Border.

expression is not getting evaluated properly.

When running the nested report in the dw preview pane, report is showing ok.

The nested argument expression is:

if( Getrow() = Long(Describe( 'Datawindow.FirstRowOnPage' )), dept_id , 0)

RESOLUTION: Behavior is not supported. Workaround is to add another retrieve().

and then disables a menu item that has a toolbar with a toolbar icon, the

text on the disabled commandbutton goes away. This only happens when the app

runs a on win2000 sp4 machine.

This logic exists in the determine_asa_regpath() function of nvo_appname_sync.sru. To make use of this new logic, you must rerun the MobiLink synchronization wizard to regenerate the sync objects.

The app appears to be crashing at the following:

FAULTING_IP:

PBSHR105!PbHeap_panic+237 [e:\pb105\3rdparty\heap\spbheap.c @ 1421]

10bdda57 cc int 3

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 10bdda57 (PBSHR105!PbHeap_panic+0x00000237)

ExceptionCode: 80000003 (Break instruction exception)

ExceptionFlags: 00000000

NumberParameters: 3

Parameter[0]: 00000000

Parameter[1]: 88a32258

Parameter[2]: 00000000

RESOLUTION: Customer resolved by moving to SDI from MDI.

At this time:

10.0.1.3488

9.0.2.3500

The call:

GetSynchronizeResult( hUL, result )

Would generate "FatalAppExit" with a memory corruption message.

((workaround available))

violation in the pbdwe105.dll:

FAULTING_IP:

PBDWE105!DWChildAccessible::getValue+64 [e:\pb105\dw\engine\external\dweacchd.cpp @ 660]

107e6a94 8b3c82 mov edi,[edx+eax*4]

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 107e6a94 (PBDWE105!DWChildAccessible::getValue+0x00000064)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 00000008

Attempt to read from address 00000008

When constructing an instance of an MLSync object (at runtime), if the Object Revision Number in the MLSync object is greater than the "ObjectRevision" entry that exists in the Windows Registry, that means this MLSync object was recently regenerated and deployed to this client. Therefore, we will use the new properties in the MLSync object as the default values. Also we will call "SetSyncRegistryProperties()" to override the Windows Registry values with the new values from the MLSync object.

dec my_val

my_val = val

return string(my_val )

IN PB 10.2.1 latest builds 4.02 evaluates as 4.019999......

You can workaround the problem by declaring the decimal as below:

dec {2} my_val

but customer says that they have this throughout their application and do not want to have to change it.

PB 10.5.1 lastest build and PB 11 work as expected.

on a multi cpu machine. The access violation is in the pbdwe105:

FAULTING_IP:

PBDWE105!DWPainter::VisitDetailBand+23d [e:\pb105\dw\engine\renderer\dwrpain.cpp @ 386]

10739d3d 8b12 mov edx,[edx]

EXCEPTION_RECORD: ffffffff -- (.exr ffffffffffffffff)

ExceptionAddress: 10739d3d (PBDWE105!DWPainter::VisitDetailBand+0x0000023d)

ExceptionCode: c0000005 (Access violation)

ExceptionFlags: 00000000

NumberParameters: 2

Parameter[0]: 00000000

Parameter[1]: 00000000

Attempt to read from address 00000000

The crash dumps where generated with PB_POOL_THRESHOLD=0 set.

http://www.lumisoft.ee/lsWWW/download/downloads/Net/Help/html/530796c3-44a8-92e4-17a4-b2732644a218.htm

Root issue is that STATIC methods are being improperly filtered out by the import (system tree) logic.

when the datawindow is on a tabcontrol.

Have a window with 2 datawindows and tab controls.

object, the data property is not being populated correctly. It always

gets populated with the last item in the treeview, even though the handle number

is different.

Problem happens for Winform and Webform.

Workaround: install PB directly on the PC and not over MS-Remote Consol

---------- Build and Deploy: Build and Deploy of project p_basic_tutorial_exe

The current library list is different than the library list contained within this project.

The project library list has been updated.

Check the build options for the updated list and try again.

Invalid LibList

---------- Finished Build and Deploy of project p_basic_tutorial_exe (2:41:42 PM)

No matter how many times I try this, I get the same message. The PKW, PKT, and PKL are all read-write. I changed my local user permissions on the PKL to "Full Control", but that didn't help.

However, if I open the project in the Project painter and click the Build button in the toolbar, I get the same message the first time, but then I successfully deploy it the second time. I'm pretty sure if I then save the project, I would be able to deploy it from the context menu.

The reason this is happening is that the project object is not actually opened, so it cannot be updated.

The workaround is easy, and it's one of those things where if we automatically update the project object there would be side-effects (like what if the project is under SCC?)

Fontsize 14 becomes 12.5 and 9 becomes 8 after printing text with PrintText

the cpu utilization goes up to 99%. When deploying again, pb appears

to be unresponsive and hangs.

Running the "DB Painter" sample application for PocketBuilder, I no longer freeze the device. Instead, I get a message saying "dbodbc9.dll cannot be loaded". I believe this is the ODBC driver from iAnyWhere. With SQL AnyWhere 10 installed, the module is called dbodbc10.dll.

In either the DSN file or the DBPARM add the specific driver statement.

"driver=dbodbc10.dll"

This CR fixes the problem.

Customer wants to know if this can be done today with ORCA. I suspect the answer is NO. Can we enhance ORCA to accomplish this in the PB 11.1 time frame? If so, is there sufficient customer demand for this feature for him to add the feature to PowerGen?

Likewise, we would presumably add the same the ability in Orcascript once the ORCA API is enhanced.

Any la_periods[]

If la_periods[i] = 0 Then la_periods[i] += ll_cycle //Fails in machine code (DLL generation)

Workaround is to case the unbounded ANY array

PB 10.5 reports error : "n_sql_base.of_setconnect.73: Error C0019: Incompatible property itr_sqlca for type n_error"

---------- Build and Deploy: Build and Deploy of project p_basic_tutorial_exe

The current library list is different than the library list contained within this project.

The project library list has been updated.

Check the build options for the updated list and try again.

Invalid LibList

---------- Finished Build and Deploy of project p_basic_tutorial_exe (2:41:42 PM)

No matter how many times I try this, I get the same message. The PKW, PKT, and PKL are all read-write. I changed my local user permissions on the PKL to "Full Control", but that didn't help.

However, if I open the project in the Project painter and click the Build button in the toolbar, I get the same message the first time, but then I successfully deploy it the second time. I'm pretty sure if I then save the project, I would be able to deploy it from the context menu.

is not moving the cursor before the first byte in the column. SelectText() is not

highlighting text when used in the itemfocuschanged event.

editchanged event:

setcolumn(this,"mycol")

itemfocuschanged:

mydata = this.getitemstring(1,"mycol")

this.selecttext(1,len(mydata))

1) When inserting data into a table using embedded sql , it throws error :

SQLSTATE = 21S01

Microsoft OLE DB Provider for SQL Server

Insert value list does not match column list

The problem is the ":SQLCA.LogId" as one of the value in Insert statement. If you hardcode this value or set DisableBind = 1 , the problem goes away.

2) When retrieving a datawindow having a Union clause, it throws following error :

SQLSTATE = 42S22

Microsoft OLE DB Provider for SQL Server

Invalid column name 'selection_syntax'.

Again if you set DisableBind =1 , it resolves the issue. But customer cannot set DisableBind = 1 because the datawindow update statement will not save Unicode data properly with DisableBind set to 1.

select "Carriers POR - Keyes Coverage (Ft. Lauderdale--See Rates&Fees)" , 82635 union select "Agent/Broker - Keyes Coverage (Ft. Lauderdale--See Rates&Fees)" , 82635 union select "Carrier - Fireman's Fund Insurance Co (Atlanta, GA (PO BOX))" , 463096

This should populate the dddw with 3 rows of a display value and a data value.

This used to work fine in build 9004 and now fails in 9891. The error is "Select Error: Unclosed quote before string ..." The problem seems to be because of the -- in the quoted strings. If you remove the -- or just change them to a single -, then it works. But since each is a double quoted string, it should work as is.

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PBVM 10.5.1_6662 and PBVM 10.5_6021 for Sun Solaris

Database/Driver File/Version: JDBC

Comments: Today, Editmasks in webdw are designed for display only, according to manuals: http://infocenter.sybase.com/help/topic/com.sybase.help.pb_10.5.dwprgug/html/dwprgug/BABDJJHI.htm

Edit styles

All edit styles are supported except InkEdit and EditMask, with the exception of the DDCalendar EditMask. If the DataWindow uses the EditMask edit style, the styles specified are treated as though they were specified as a display format.

Customer would like the functionality to be implemented in WebDW Editmask for entering data, just like the normal dw in PB applications.

The InputFieldInsert fails on an existing Rich Text document with return value -1

This can depend on the position of the cursor.

-----------------------

OS: Windows XP SP2

Versions and Build #s Tested: PB 10.2.1_9823

Database/Driver File/Version: PB ODBC connecting to ASA 9.0 db

Comments: Today, we manually need to set the format to "sample" extended attribute in already existent dw's before the extended attribute was created.

Customer would like a way to automatically do this job.

In Jaguar.log this entry is found:

Jun 28 12:33:29 2007: 180749-NO_PERMISSION: Jaguar/Repository (user any_user)

Jun 28 12:33:29 2007: SystemException: NO_PERMISSION (Session/create - @ip address)

It does not happen when client is JAVA or JAVA client and JAVA component szenario.

on a Vista machine.

Webservice Error: "org.xml.sax.SAXException: No deserializer for LocationDefinition"

shows the following:

Webform deployment is failing. The deploylog

shows the following:

---------- Error messages:

(u_color_selection).68 C0329: Function ('get_rgb') has no its prototype.

(u_vzt_color_selection).65 C0329: Function ('get_rgb') has no its prototype.

(w_graph_color_dw).uo_1.color_changed.5 C0051: No overload for method 'get_rgb' takes '0' arguments.